Commit Graph

57 Commits

Author SHA1 Message Date
Simon Richter a9ccf1161b Fix quotes in UI messages
This replaces all single and angle bracket quotes in UI messages with
double quotes, for consistency.

Sorry to all translators.
2017-12-15 07:33:07 -05:00
Wayne Stambaugh 7ca7d9078e Eeschema: fix potential symbol cache library name collisions.
If a schematic contains two symbols with the same name from different
libraries, the cache will contain the last symbol saved with that name.
Prepend the library nickname with the original schematic symbol library
nickname when saving the cache library to prevent name collisions.
2017-12-08 08:32:23 -05:00
Wayne Stambaugh 168bf5e4b0 Symbol library archive bug fixes.
Move FindAlias() inside a try/catch block as is can throw an exception.

Don't abort adding symbols to library when a symbol cannot be found in
the symbol library table or the cache library.  Instead, queue up error
messages and display them after attempting to add all of the symbols.

Always save the library file even if some of the symbols could not be
archived.

Catch IO_ERRORs in SCH_COMPONENT resolve to prevent unhandled exceptions
further up the stack.
2017-11-09 18:50:22 -05:00
Wayne Stambaugh c1f7c1778a Revise symbol rescuer to support symbol library table.
Refactor rescue objects so that they can support derivation.

Factor out legacy rescuer code to perform legacy project rescues.

Create new symbol library table rescuer for rescuing symbol library table
based projects.

Perform the correct rescue type on project load.

Add symbol library table remapping support to the tools menu for run on
demand as applicable.

Add flag to SCH_SCREENS::UpdateSymbolLinks() to allow forcing the symbol
link updates when the library modification hash has not changed.
2017-11-09 18:50:20 -05:00
Wayne Stambaugh 36f6d4a1f4 Convert symbol library editor over to use symbol library table.
Simplify some of the library editing code.  There have been a few minor
changes in the behavior of the editor.  If the current symbol is deleted
from the library, the next symbol in the library is not loaded.  The
deleted symbol is cleared and the current symbol is empty.

Change component to symbol to align with the preferred terminology
discussed on the developer's mailing list.

Add separate update UI event for save library as to enable the menu entry
whenever a library is selected.

Change the select symbol list dialog to a single column using the LIB_ID
format LIB_NICKNAME:LIB_ITEM_NAME so that the selection can be parsed by
LIB_ID.

Add method to expand URI to LIB_TABLE_BASE.

Override wxApp::OnExceptionInMainLoop() in debug builds to make debugging
easier when an unhandled exception occurs in a wxUpdateUIEvent handler.

Change SCH_SCREENS::HasNoFullyDefinedLibIds() to return false when the
schematic has no symbols to prevent the remapping dialog from being run.

Use SCH_COMPONENT part reference when creating netlist rather than looking
up the library symbol.
2017-11-09 18:50:20 -05:00
Dick Hollenbeck 19e6bde09a Rewrite class UTF8 to contain rather than extend std::string storage.
This forces the compiler class specific features rather than borrowing
from the base class's std::string.  In some cases prior to this,
wxString( std::string ) was being called rather than UTF8::operator
wxString() leading to garbled wxStrings.

Added function UTF8::wx_str() which is of great convenience also.

Implicit conversions still work as before, and hopefully more reliably.
2017-07-26 08:30:12 -04:00
Dick Hollenbeck 4e7de8a761 Reverse commit 4011ed4e31.
This commit was too broad and not cognizant of the purpose of the class
UTF8.

Add MAYBE_VERIFY_UTF8() macro, which can trap non-UTF8 encoded strings in
debug builds.

Use that macro conditionally in class UTF8 to trap non-UTF8 encoded strings
being put into UTF8 instances.
2017-07-26 08:26:56 -04:00
jean-pierre charras 459fd9e584 Better fix for bugs 1703258 and 1702707: better detection of cache lib modifications, not always detected previously.
The component to symbol links were previously not always updated after a library change,
if the change is made outside the library editor.
2017-07-12 16:07:08 +02:00
jean-pierre charras d7a4fb7d8b Fix a crash in Eeschema when creating a netlist just after saving the project.
This is more a workaround than a fix.
The crash was due to the fact the library cache is modified on the disk with the saving process.

Fixes: lp:1702707
https://bugs.launchpad.net/kicad/+bug/1702707
2017-07-09 20:17:18 +02:00
jean-pierre charras 83b4e45eb4 Fix a memory leak, if an error occurs. 2017-07-09 10:16:00 +02:00
jean-pierre charras 895c0bb716 Fix a compil warning and a wxASSERT in netlist dialog and component_tree.cpp 2017-07-08 15:58:22 +02:00
jean-pierre charras e9577a1025 Fixes: lp:1692706 (eeschema cache lib not rebuilt when saving schematic, and existing symbols already in cache are not updated)
https://bugs.launchpad.net/kicad/+bug/1692706
2017-05-29 18:22:36 +02:00
Chris Pavlina 4011ed4e31 Convert UTF8 to/from wxString correctly around LIB_ID
Fixes: lp:1675942
* https://bugs.launchpad.net/kicad/+bug/1675942
2017-03-24 21:38:00 -04:00
Wayne Stambaugh 58ed5466b4 Fix legacy schematic I/O symbol library parser bug.
Apparently symbol definition blocks can have a '0' character in the lock
position which is typically defined as 'L' or 'F'.  This must have been
a oversight at some point since both versions of the DEF parameters
exist in library version 2.3 files.

Disable the symbol library cache buffering after saving.
2017-02-14 14:49:22 -05:00
Wayne Stambaugh 175d68fbb1 Fix schematic cache library broken by schematic I/O plugin changes.
Check for existence of cache library when before attempting to rebuild
the cache.  Create a new cache library object if no cache library was
loaded.

Add missing buffering and cache properties to LIB_PART::FindAlias() to
prevent the plugin from reloading the cache library that may not exist.

Add method to find library by full path and file name.

Revert the check for a symbol in the cache library remove from last
patch.

Add checks for plugin cache file name validity and existence of a the
file before attempting to verify the file modification time to prevent
wxWidgets from raising an assertion in debug builds.

Clear modified flag when saving buffered and/or cached library.
2017-02-13 13:47:46 -05:00
Wayne Stambaugh d5bf465dc6 Fix library save bug in legacy schematic I/O plugin.
Add the ability to save empty symbol library file for caching and empty
schematic.

Remove check for existing symbol in cache populating routine.  Just perform
a complete rebuild of the cache library and overwrite the existing one.

Fixes lp:1663871

https://bugs.launchpad.net/kicad/+bug/1663871
2017-02-12 18:40:53 -05:00
Wayne Stambaugh 7ccdca5ced Use library ID to store library symbol information in the schematic symbol.
Use LIB_ID instead of wxString for storing the library symbol information
in the schematic symbol in preparation for the upcoming symbol library table
implementation.

Change the FindLibAlias and FindLibPart functions in the PART_LIBS object
instead of wxString.  Please note that only the library ID name is used to
search the list of libraries.  The library nickname is ignored.  Once the
symbol library table is implemented and full LIB_IDs are defined, the
library search code will no longer be used and will only be kept to load
older schematics that have not been converted.

Move SCH_LEGACY_PLUGIN_CACHE definition so that the legacy plugin knows
how to properly delete the cache object.
2017-02-10 08:36:59 -05:00
Wayne Stambaugh 73bbc35c3e Make the schematic I/O plugin the only option.
Add SCH_PLUGIN object to PART_LIB object.

Convert all PART_LIB I/O to use SCH_PLUGIN.

Remove library caching from PART_LIB and use caching provided by SCH_PLUGIN.

Add support to use PROPERTIES for buffering and document file write control
instead of adding code the SCH_PLUGIN object in the SCH_LEGACY_PLUGIN that
will not be required when the new file formats are implemented.

Add buffering to SCH_LEGACY_PLUGIN to prevent cache from writing file on
every change to library.  This is to prevent the cache library from being
written every time a new symbol is added.

Add option to not save library document file when saving library.  This is
primarily used by the cache library write code.

Move symbol library write code out of LIB_PART and into SCH_LEGACY_PLUGIN.

Add exception handling where LIB_PART caught the exception and returned
an error status.

Remove KICAD_SCH_IO_MANAGER build option as it is no longer optional.
2017-02-10 08:36:57 -05:00
Wayne Stambaugh f477cc958c Eeschema: PART_LIB object clean up.
* Rename redundant function PART_LIB::GetEntry() to PART_LIB::GetAlias() which
  is more descriptive and move the GetAlias() function which was nothing more
  than a call to GetEntry().
2016-09-02 19:40:18 -04:00
jean-pierre charras 37deba60c3 Fix shadowed vars (in microstrip.cpp) and deprecated compil warnings. 2016-06-08 09:28:19 +02:00
jean-pierre charras c6f4f15926 Eeschema: Minor code reorganization:
* move not shared files (sch_item_struct.*, sch_base_frame.h) to eeschema;
* move wxEeschemaStruct.h to eeschema and rename it schframe.h to be consistent with the other corresponding file name schframe.cpp;
* remove few not needed  #include
2015-02-21 10:46:44 +01:00
jean-pierre charras 93a3d4cb28 Eeschema: back to KICAD_KEEPCASE option, to find parts in lib, when using case sensitive option (default).
Schematic component properties dialog: add 2 helper buttons to manage the chip name (name of the corresponding part in lib)
- a browse button to chose an other chip name
- a test button, to know if the part exists. If not existing, list the parts found when searching using a case insensitive comparison.
2014-09-17 18:04:04 +02:00
jean-pierre charras 1edd8c8ac8 Eeschema: remove the compil option KICAD_KEEPCASE. Eeschema is now always case sensitive when seraching components in libs.
However to be compatible with old versions of Eeschema, when a search in library fails, a case insensitive search is made.
Therefore, this version should be compatible with sch files created by previous Eeschema versions compiled with KICAD_KEEPCASE = OFF
2014-09-14 17:43:18 +02:00
Dick Hollenbeck 7e483f69bd Modular KiCad Blueprint Milestone B), major portions:
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
     get disassociated from their true PROJECT.
  *) Allow loading eeschema library editor from kicad.exe
  *) Allow loading pcbnew library editor from kicad.exe
  *) Rename LIB_COMPONENT to LIB_PART.
  *) Add class PART_LIBS, and PART_LIB.
  *) Make PART_LIBS non-global, i.e. PROJECT specific.
  *) Implement "data on demand" for PART_LIBS
  *) Implement "data on demand" for schematic SEARCH_STACK.
  *) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
  *) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
     a weak pointer.
  *) Remove all chdir() calls so projects don't need to be CWD.
  *) Romove APPEND support from OpenProjectFiles().
  *) Make OpenProjectFiles() robust, even for creating new projects.
  *) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
     and save them in the .eeschema config file, not in the project file.
  *) Fix bug with wxDir() while accessing protected dirs in kicad.exe
  *) Consolidate template copying into PROJECT class, not in kicad.exe source.
  *) Generally untangle eeschema, making its libraries not global but rather
     held in the PROJECT.
2014-08-13 15:28:54 -05:00
jean-pierre charras f905b4697e Code cleanup: Pcbnew: move files relative to exort functions to the new folder exporters
all: remove include <protos.h>  from a lot of  files which do not need it.
2014-01-08 15:18:51 +01:00
jean-pierre charras 6fcd9eb8a6 Eechema: fix bug : when saving the schematic project, the lib cache was saved under the current sheet opened, not the root sheet.
Pcbnew: clamp default plot line width between 0.02 and 2 mm. the other bug (saving this parameter in internal units instead of mm is not fixed)
2013-05-07 20:32:06 +02:00
Lorenzo Marcantonio 42709330e0 Better strings for the translators (converted concatenations to formats) 2013-04-09 19:49:01 +02:00
Jacobo Aragunde Perez 638decafae Commit fixes for bugs #1108773 and #1110651 and a bug fix improvement for #1101718 and #1102381. 2013-02-01 08:58:49 +01:00
Jacobo Aragunde Perez 2f3c5e7a1e Eeschema: fix Bug #1102381 <eeschema: -cache.lib file not created the first time you save a schematic> 2013-01-21 20:58:02 +01:00
Dick Hollenbeck dd519d68ea remove unused #include <wxfstream.h> from several places 2012-10-29 16:56:18 -05:00
Dick Hollenbeck 7c5e42b4d0 switch from STREAM_OUTPUTFORMATTER to FILE_OUTPUTFORMATTER mostly throughout,and minor richio factoring 2012-10-25 10:41:20 -05:00
Dick Hollenbeck b8a0ab4c52 switch to <> for includes from "" per conversation with Jean-Pierre and Wayne, adjust search paths 2012-01-22 22:33:36 -06:00
Wayne Stambaugh 7a5e6a2d66 Remove message dialogs from COMPONENT_LIBRARY class.
* Move the component library save file creation and write error dialogs
  into the appropriate frame object.
* Change the save component library and document definitions take an
  OUTPUTFORMATTER object instead of a file name.
* Change the component alias save document definition function to take
  an OUTPUTFORMATTER object instead of a file handle.
2011-11-11 15:10:24 -05:00
Wayne Stambaugh d4fb921b43 Eeschema ERC improvements and other minor fixes.
* Move the hierarchical label connected test into the NETLIST_OBJECT class.
* ERC pin type strings can now be translated.
* Remove unused EDA_DRAW_PANEL attribute from all ERC test functions.
* Add get marker count method to SCH_SCREENS object.
* Redundant header removal.
* Lots of coding style policy fixes.
2011-10-07 10:41:30 -04:00
Wayne Stambaugh ebc7259a91 Rename WinEDA_App class to EDA_APP and remove redundant includes. 2011-09-06 10:09:40 -04:00
Wayne Stambaugh 7cb34aece7 Schematic component object encapsulation and Doxygen comment warning fixes. 2010-12-14 10:56:30 -05:00
Wayne Stambaugh adb4ad1a7b Schematic object improvements and other minor fixes. 2010-12-10 14:47:44 -05:00
Wayne Stambaugh c79077c9a2 Minor fixes and lots of coding policy changes. 2010-12-08 15:12:46 -05:00
Wayne Stambaugh 37ad67dfb1 EESchema file name and location house keeping. 2010-11-11 16:10:27 -05:00
Wayne Stambaugh 76aa3f6e1c EESchema schematic object refactoring and header rationalization. 2010-11-10 10:30:12 -05:00
Wayne Stambaugh 1e7d95d58e Begin schematic object rationalization and other minor improvements 2010-10-26 16:25:48 -04:00
charras b338dfdccb Fixed bug 2962142 (Eeschema: Crash SaveEEFile on demo) 2010-03-03 15:56:08 +00:00
stambaughw b2f9d5bd74 Comment translations and other minor updates.
* Complete comment translation for all EESchema source files.
* Complete comment translation for all 3D viewer source files.
* Rename class class_hierarchical_PIN_sheet to SCH_SHEET_PIN.
* Rename class DrawSheetStruct to SCH_SHEET.
* Tool tip capitalization fixes.
* Uncrustify and spell check comments and strings in all modified source
  files.
2009-11-04 20:46:53 +00:00
stambaughw 7e24e43890 wxWidgets 2.9 string fixes and other minor updates.
* Replace all known instances of (const wxChar*) casts to GetChars() for
  wxWidgets 2.9 compatibility.
* Cleaned up get component dialog so last part gets saved on wild card
  selections.
* Remove redundant schematic component drawing code.
* Added SCH_COMPONENT constructor to create new component from library
  component object.
* Add message panel helpers to WinEDA_DrawFrame and update old message
  panel access code.
* Using library viewer to add component to schematic now respects unit
  and body style selection.
2009-10-16 17:18:23 +00:00
stambaughw 8570d3311a Component library editor improvements and minor bug fixes.
* Component library objects renamed for improved readability.
* Fields now move when selected in library editor.
* Add copy constructor to all library draw and library component objects.
* Added copy constructor to EDA_BaseStruct.
* Delete base screen in WinEDA_DrawFrame destructor to prevent potential memory leak.
* Fixed memory access bug when replacing and adding a component to library.
* Moved library component block manipulation code into component object.
* Removed all of the global variables used by the library editor main window object.
* The usual code cleaning and refactoring.
2009-09-25 18:49:04 +00:00
stambaughw f7452ce131 Component library object and other minor improvements.
* Create static component library methods to manage library list.
* Rename component library, component, and alias objects to more readable name.
* Use pointer to component instead of root name to prevent redundant library searches.
* Add append message helper to message panel that calculates string length.
* Initial ground work for merging library and library document files.
* Improved component library file load error checking.
* Minor component library editor improvements.
2009-09-18 14:56:05 +00:00
stambaughw ab74cfeda8 Component library object improvements.
Moved all library entry manipulation code scattered throughout EESchema into
the component library object itself.  Adding, removing, and searching is now
handled by the library object.  This is the precursor to replacing the current
priority queue code.
2009-08-27 11:41:56 +00:00
stambaughw 689579bde1 Global variable unobfuscation, new library path search, and lots of other changes. See CHANGELOG.txt. 2009-04-05 20:49:15 +00:00
stambaughw b833a46bad More header file realignments to reduce recompiling and general code cleaning. 2009-02-04 15:25:03 +00:00
charras 9dae370c1f cleanup, cosmetic enhancements. enhancements about display zones options 2008-12-12 21:30:07 +00:00