1) Add highlighting to simProbe and simTune tools.
2) Probe tool should accept wires and pins, not wires and components.
3) Give simulator window a flat look to match rest of Kicad.
4) Collapse whitespace out of simulator window.
5) Add some error messages.
6) Add some whitespace to simulation setting dialog.
When removing a junction, we need to keep the next pointer for deleted
item, marking them with a flag until committed.
Fixes: lp:1837398
* https://bugs.launchpad.net/kicad/+bug/1837398
(cherry picked from commit 4363e6a213)
When selecting items where the reference point is off-screen, GTK
would default the cursor to jump to the bottom of the screen.
Fixes: lp:1838843
* https://bugs.launchpad.net/kicad/+bug/1838843
While we do not generate these arcs internally, some external tools
generate arcs that are technically valid but display correctly only
because of an oddity in the degeneracy mapping.
Fixes: lp:1838557
* https://bugs.launchpad.net/kicad/+bug/1838557
(cherry picked from commit cf949609b2)
Check for symbol libraries that somehow ended up in the project file
after remapping occurred and remove all of them to prevent potentially
broken symbol library links.
Add nagware dialog to warn the user and a checkbox to never show the
dialog again.
Fixes lp:1838185
https://bugs.launchpad.net/kicad/+bug/1838185
Images have a scale factor and this factor was taken in account twice
For image having a scale factor not equal to 1.0, the bounding box was too big (or too small)
Remove an existing sheet from the current page that requires a schematic
load from file to prevent a corrupt screen list from causing a segfault.
Merge the edit sheet file loading with the append schematic code since
they are functionally the same. This allows the sheet edit code to
take advantage of all of the added broken symbol library links added in
the recent append schematic fixes.
Fixes lp:1835841
https://bugs.launchpad.net/kicad/+bug/1835841
Also rewrites the PCBNew Find dialog to make use of the above, including:
1) searching in user-defined footprint fields
2) searching in pcb text
3) a history list in the search popup
4) case sensitive searching
5) word sensitive searching
6) the ability to turn wildcard searching on/off
7) better placement of the result when the dialog obscures part of the
window
Fixes: lp:1838006
* https://bugs.launchpad.net/kicad/+bug/1838006
The problem is that wxEVT_CHAR_HOOK doesn’t do the key translation
properly. wxEVT_CHAR does, but we only get to that if we skip the
event at the end of the tool’s event processing loop, which most tools
don’t do. (Selection tools, point editors, pickers, and a couple of
others do skip, which is probably why this didn’t get reported earlier.)
I played around with a couple of ways to fix wxEVT_CHAR_HOOK. Most of
them don’t work, and the few egregious hacks I tried weren't cross-
platform.
So I’m changing it so that most tools now skip at the end of their
event loops. I left out a couple that I felt were high risk (length
tuning, for instance). But there’s still enough risk that I’m 100%
sure it will break something, I just haven’t a clue what.
Fixes: lp:1836903
* https://bugs.launchpad.net/kicad/+bug/1836903
The point editor expects rectangles with a height and width > 0.
Previously, this constraint did not exist,
so some LIB_RECTANGLE graphic items can create issues when trying to move a corner.
Now, the LIB_RECTANGLE graphic item is normalized before trying to move a corner.
This fixes the last suffix that was missed by 168fa09f5. The schematic
backup files should have the suffix .sch-bak to distinguish from
.kicad_pcb-bak or other backups.
(cherry picked from commit b6fe4ff637)
Previously, for instance after modifying preferences or language,
they were rebuilt but the tools state was not set due to a missing call to SyncToolbars() after rebuilding.
Do not add cache library from another project to old library list. This
is wrong and can cause all kinds of symbol library linking issues. It's
better to force the user to fix broken symbol library links than the false
security of using multiple cache libraries.
Use correct paths when appending schematic outside of the current project
path when hierarchical sheets are appended. If the path can be relative,
give the user the option to use either relative or absolute paths.
Do not change symbol library names in schematics appended from a source
outside the current project. This will almost ensure the symbol library
links will be broken in the source project.
When the appended schematic is from another project, attempt to check all
of the possible combinations of symbol library table importing that could
cause broken symbol library links and give the user the option of canceling
the append operation or live with the possibility that there may be broken
symbol library links.
When the append schematic is in the current project path but not part of
the schematic, check to see if there are any library nicknames that do
no exist in the project symbol library table and give the user a chance
to cancel the append process.
This reverts commit eadf6d93bc.
because the issue with net names containing '/' is not actually inside the netlist.
This commit eadf creates issues with ngspice 2.8 and older, and do not fix anything in ngspice
Selecting in Eeschema has major issues, as does highlighting in
pcbnew. So for now we do highlighting in eeschema and selecting
in pcbnew. Improving highlighting for pcbnew would be the next
logical step....
Fixes: lp:1836640
* https://bugs.launchpad.net/kicad/+bug/1836640
wxLog::SetActiveTarget() was initialised to libedit frame,
but the active target was not released after closing and deleting libedit, thus creating a crash on Kicad exit.
The full filename comparison to detect the reuse of a file was broken on Windows
because it mixed a native filename notation (containing the drive id),
and a unix notation (no drive in filename, different separator).
Because the pickers are called with an Activate()/Wait() pair, any
usurping tool gets in between the picker handling the cancel (due
to activation) and the picker client doing a PopTool(). The new
tool is therefore pushed before the old tool is popped.
Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907
This changes make_lexer() so that it no longer generates a custom target
but instead attaches the generated files to an existing one (so the first
argument now is the name of an existing library or executable, and it needs
to come after the add_library/add_executable call).
The generated source is no longer listed in the project sources, as it is
added by the function. The files are generated in the build tree rather
than the source tree, and the directory is added to the include path for
the respective project as well as exported to projects linking against it.
Generated files in subdirectories are somewhat supported, but need to be
referenced with the same name as they were generated (i.e. including the
subdirectory name).
Fixes: lp:1831643
* https://bugs.launchpad.net/kicad/+bug/1831643
Fixes: lp:1832357
* https://bugs.launchpad.net/kicad/+bug/1832357
Fixes: lp:1833851
* https://bugs.launchpad.net/kicad/+bug/1833851
If Symbol Editor isn't open then Eeschema needs to read in the
default line width.
Symbol Editor was failing to write line width parameter back to
properties.
Fixes: lp:1835051
* https://bugs.launchpad.net/kicad/+bug/1835051
Previously, the background was highlighted, but not the text.
On Windows, the text was unreadable, until it was selected.
Now the foreground color is also set to the text selected color.
Replace also in lib_manager.cpp some DisplayErrorMessage calls by wxLogMessage calls,
to avoid hanging or crashes, at least on Windows.
wxLogMessage also has the advantage of grouping all messages and displaying them during a idle time.
1) Use PenWidth() (which is clipped at 0) instead of Width()
2) Implement an interior HitTest when a PolyLine is filled
3) Brighten background objects as well as foreground
4) Don't HitTest last segment when PolyLine is not filled
Fixes: lp:1834703
* https://bugs.launchpad.net/kicad/+bug/1834703
* Implement proper natural sorting of the reference values
* Perform quoting of all items in BOM generators that use csv.writer
Fixes: lp:1833822
* https://bugs.launchpad.net/kicad/+bug/1833822
This is based on the notion that in Kicad the start and end-points
are far more important (as they usually connect to other segments)
than the center is.
Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.
Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
Prevent the symbol and footprint library table editors from substituting
the current project path (${KIPRJMOD}) when adding libraries to the global
library table. This will almost assuredly fail when opening a different
project. We still allow users to manually use ${KIPRJMOD} in global table
paths under the assumption that if they are typing this in then they most
likely understand environment variable substitution.
Fixes lp:1830694
https://bugs.launchpad.net/kicad/+bug/1830694
In singletop mode, all frames show the "Quit" option in the file menu
and will quit on Ctrl-Q. When launched from the main KiCad interface,
sub-programs show the "Close" option instead and will close with Ctrl-W.
In this mode, Ctrl-Q will instruct the main program to exit.
Fixes: lp:1779938
* https://bugs.launchpad.net/kicad/+bug/1779938
EEschema optimizes wires by merging colinear segments. If a schematic opened without a valid
cache library or missing installed libraries and later saved, this optimization can cause connectivity
errors. In order to fix that we check each pin-wire connection and junctions if necessary.
Netlists do not accept any char in netnames (especially spice).
They must use only "/" as root sheet path name.
Especially _( "<root sheet>" ) breaks netlists because:
- there is a space in name, and special chars (< and >)
- it is a translatable name. so the actual name cannot be managed.
- most of netlist code in Kicad expects a "/" as root path.
This adds the functionality to add multiple labels to your schematic at
once by using spaces in the original label name.
Fixes: lp:1095113
* https://bugs.launchpad.net/kicad/+bug/1095113
Prefix the sheet name with "Sheet: " and the sheet file name with "File: "
when plotting so that it matches the display sheet rendering.
Improve the root sheet plot file name.
Fixes lp:1832081
https://bugs.launchpad.net/kicad/+bug/1832081
The grid apply code was always preventing empty fields. Change this the
broken behavior to allow any field to be empty except the reference and
value fields.
Fixes lp:1832722
https://bugs.launchpad.net/kicad/+bug/1832722
Also changes the presentation of the string when the checkbox appears
so that the "Changes will be lost" warning isn't hidden by the turndown.
This last part may require conditional compilation as it's undocumented.
Lastly, regularizes the Unsaved Changes strings between the apps.
Drawing junction dots at the line width allows users who do not like
them in their schematics to avoid having them drawn.
(cherry picked from commit 75b5324762)
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
DIALOG_EXIT was not being laid out correctly after setting the dialog
message. Rather than fix our custom DIALOG_EXIT, wxMessageDialog and
wxRichMessageDialog were substituted as direct replacements for all
of the variants of DIALOG_EXIT. This make message dialogs appear more
consistent because wxMessageDialog uses the default platform message
dialog and wxRichMessageDialog uses the default platform rich message
dialog on windows.
Remove DIALOG_EXIT_BASE as it is no longer required.
Fixes lp:1832899
https://bugs.launchpad.net/kicad/+bug/1832899
If a tool called something like clearSelection while processing a
MOUSE_CLICK, the SELECTION_TOOL will pass the clearSelection
COMMAND_EVENT because it handles it as a transition, not as an
event. Because m_passEvent is effectively global, the tool manager
would then interpret that as passing the MOUSE_CLICK and we'd end
up processing the click by multiple tools.
A bug in LIB_MANAGER::LibraryExists() prevented a library removed from
the symbol library table from being removed from the tree view. Add the
proper check to SYMBOL_TREE_SYNCHRONIZING_ADAPTER::Sync().
This exposed another issue with synchronization between the library
table editor and the tree view which could lead to orphaned library
modifications and/or a segfault when the currently selected library was
removed from the symbol library table. Give the user a chance to save
or revert any changes before allowing changes to the symbol library
table.
Fixes lp:1821691
https://bugs.launchpad.net/kicad/+bug/1821691
These options were used to support the legacy canvas when drawing on
MacOS and GTK3. With the move to 100% GAL, they are extraneous. This
moves all DC over to "COPY" as we only use this for printing support in
Eeschema at the moment, so there is a single draw command (no erasing)
for the canvas.
There are a whole bunch of cases which all have to work:
regular move
move followed by drag
drag followed by move
move followed by duplicate
duplicate
paste
and all both with and without Warp Mouse on Move checked.
Return the EDA_DRAW_FRAME class back to common, whence it came (before it was
duplicated into legacy_wx and legacy_gal). Now there is only one
implementation (the GAL one), it doesn't need to be in a separate library.
This simplifies the dependencies for common lib users.
Since Eagle does not connect stacked NC pins but KiCad will if the pins
are coincident, we choose to only import the first of the stacked NC
pins. While this creates symbols that are slightly different in pin
count from the Eagle version, it keeps the schematic and netlist
functionally correct relative to the Eagle version.
Fixes: lp:1821319
* https://bugs.launchpad.net/kicad/+bug/1821319
(cherry picked from commit 370109b868)
Net names in eeschema that include '/' are escaped ('/' replaced by "{slash}")
Escaped netnames are only for internal use, and must be unescaped in spice netlist and dialogs.
It was escaped (replaced by "{slash}") in dialog.
This is right for labels, not for texts.
A consequence was the directives in spice simul can be broken.
Now the graphic text is not escaped.
Building custom targets that depend on custom commands such as our
keyword lexer requires two layers of indirection to pick up changes
properly and not overwrite the same file in parallel builds.
Fixes: lp:1831643
* https://bugs.launchpad.net/kicad/+bug/1831643
Michael Kavanagh
Wayne Stambaugh
jean-pierre charras
Jeff Young
Seth Hillbrand
Ian McInerney
Jon Evans
Simon Richter
Maciej Suminski
Tomasz Włostowski
Steven A. Falco
Seppe Stas
John Beard