Commit Graph

57 Commits

Author SHA1 Message Date
Jeff Young fb59f83683 Clean up references in RN_NETs when garbage collecting CN_ITEMs. 2023-11-01 13:53:30 +00:00
Jon Evans a77e630901 ADDED: Connectivity for graphic shapes on copper layers
Graphic shapes (excluding text) can now have nets when on
copper layers. Shapes behave like tracks in that they will
pick up nets from connected pads, and follow track opacity
settings.
2023-08-10 21:47:43 -04:00
Jeff Young 8b1fd62d35 Make pad & via teardrops 1st-class citizens (props of the pad/via)
Change teardrop generation to rely more heavily on BOARD_CONNECTIVITY
for improved performance.

Add updating of teardrops on BOARD_COMMIT::Push().

Also converts m_CopperItemRTreeCache to std::shared_ptr.
We don't copy it around anyway, and having to create a new set
of std::unique_ptr's for each operation is likely to be more
expensive than std::shared_ptr's overhead.
2023-05-19 18:02:03 +01:00
Jeff Young d6dd58fff9 Keep track of single-pad-islands so we can discount spokes to them. 2023-03-25 10:44:46 +00:00
Seth Hillbrand 283770fc45 Check for dirtied items in the cluster
When drawing the ratsnest, we need to be careful to avoid accessing
CONN_ITEMs that have been changed by the underlying model.  Checking for
dirty items instead of valid items will prevent us looking at data that
are out of date

Fixes https://gitlab.com/kicad/code/kicad/issues/14265
2023-03-13 16:10:39 -07:00
Jeff Young 509b39e9e4 Propagate nets within non-conflicting clusters immediately.
Fixes https://gitlab.com/kicad/code/kicad/issues/13601
2023-01-23 16:25:29 +00:00
Jeff Young 3cc960a872 Push nets to free pads when they're used.
Fixes https://gitlab.com/kicad/code/kicad/issues/13516

Fixes https://gitlab.com/kicad/code/kicad/issues/13517
2023-01-17 23:29:47 +00:00
Seth Hillbrand 35ac39844f Clean up some auto usage
Don't make new copies of shared_ptr if we can use references.  Keep auto
usage down to hard-to-type-out sequences
2022-08-15 11:29:45 -07:00
Jeff Young 08383e923c Formatting. 2022-02-16 14:18:25 +00:00
Jeff Young ca095896cb Performance: multi-thread CN_ZONE_LAYER RTree generation. 2022-02-16 14:11:09 +00:00
Jeff Young 2172810600 Performance: better sharing of zone fills. 2022-02-15 19:19:03 +00:00
Jeff Young d2de114d21 More performance optimizations. 2022-02-15 12:20:34 +00:00
Jeff Young 90f6edad61 Move connectivity algo to collision-based routines.
Fixes https://gitlab.com/kicad/code/kicad/issues/1800

Fixes https://gitlab.com/kicad/code/kicad/issues/1769
2022-02-13 00:35:11 +00:00
Jeff Young 7ccac79192 More wxString wide literals. 2022-02-05 21:29:34 +00:00
Jeff Young dcaec78cc5 A bit more angle cleanup. 2022-01-18 02:18:55 +00:00
Jeff Young d485eb2514 Move pads to EDA_ANGLE. 2022-01-14 16:08:18 +00:00
Marek Roszko 7d671cff1e Scoop up some more wxPoints 2022-01-01 21:06:40 -05:00
Jeff Young 43523df843 Measure distance from pad center, not pad hull.
Otherwise we think the wrong end of really short track segments is
connected to the pad, leaving the other end dangling.

Fixes https://gitlab.com/kicad/code/kicad/issues/8909
2021-08-02 22:42:54 +01:00
Jeff Young b573712326 Cleanup. 2021-08-01 15:37:12 +01:00
Jeff Young 096e342386 Prefix TRACK, ARC and VIA. 2021-06-11 22:07:02 +01:00
Marek Roszko b610b905fc Cleanup track.h includes 2021-06-06 09:06:55 -04:00
Marek Roszko cf2bb5692a Remove the wxLog calls from math/util.h for now
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
2021-06-01 18:44:22 -04:00
Marek Roszko 03cf2b517f Enum class PAD_ATTR_T
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
Marek Roszko b243c2280d enum class PAD_SHAPE_T 2021-05-01 08:22:35 -04:00
Jon Evans 37242f67e0 Connectivity: just pick the most popular net to update conflicting clusters
CHANGED: when pad net assignments are changed in a conflicting way (i.e.,
         tracks exist that short out more than one net after the change,
         track nets will be updated to the net with the most pads).

Fixes https://gitlab.com/kicad/code/kicad/-/issues/7929
2021-03-21 15:31:37 -04:00
Jon Evans c04e19f9ac Include optimization: move some things from common.h to point-of-use 2021-03-20 12:09:18 -04:00
Wayne Stambaugh 6a39b81647 Fix the last of broken Doxygen comment specifiers. 2021-01-27 17:39:44 -05:00
Jon Evans 70c397a9b4 Implement free vias fully
CHANGED: manually-placed (stitching) vias won't have their nets automatically updated
(unless the via is placed directly on a track segment)

CHANGED: stitching vias can be placed on footprint pads and pick up their nets

Fixes https://gitlab.com/kicad/code/kicad/-/issues/5484
2020-12-20 16:29:50 -05:00
Jeff Young f5443de7f9 D_PAD -> PAD. 2020-11-13 15:16:24 +00:00
Jeff Young f7333ad64a Update some classnames including archaic zone names. 2020-11-12 10:31:25 +00:00
Jeff Young 5fba0973ab Update formatting. 2020-10-26 15:36:07 +00:00
Marek Roszko 81a7afc76e Use kicad_algo directly rather than common.h 2020-10-24 08:53:11 -04:00
Seth Hillbrand bf3cb0b1d0 Standardize pad type enums 2020-09-30 08:38:35 -07:00
Jeff Young f8875bc5a6 Move std::contains to alg::contains. 2020-09-26 14:42:40 +01:00
Jeff Young d7e80f8008 Add std::contains() to simplify a lot of code. 2020-09-26 12:40:32 +01:00
Jeff Young 4a0d469cec Back out zone layer misunderstanding and make types clearer. 2020-09-23 20:02:21 +01:00
Wayne Stambaugh ede39780e2 Remove all debugging output that cannot be disabled.
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.

There is still some debugging output in test code that really needs to
be moved into a unit test.

Add debugging output section to the coding policy regarding debugging
output.
2020-08-18 10:17:36 -04:00
Seth Hillbrand b351bec0d7 Handle blind/buried vias in connectivity 2020-08-13 20:14:23 -07:00
Seth Hillbrand 8a0be64ad4 Ensure dangling test takes track width into account
When running a hit test to check if the anchors are connected, we should
loosen the check for tracks to account for the width.  Otherwise
connected anchors can be connected in the system but test positive for
IsDangling()

Fixes https://gitlab.com/kicad/code/kicad/issues/5027
2020-08-05 13:17:29 -07:00
Jeff Young bf445c1a95 Performance enhancements.
1) cache pad polygon outlines
   huge improvement in connectivity performance and a decent
   improvement in DRC performance
2) don't pre-allocate CONTEXT stack
   significant improvement in DRC rule performance
2) don't keep re-encoding strings
   decent improvement in DRC rule performance
2020-07-25 13:03:33 +01:00
Jon Evans 0d4ee39f75 CHANGED: Copper zones can be on more than one layer
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1963
2020-06-28 08:52:37 -04:00
Jeff Young d01b29ab37 Cleanup pad geometry handling.
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.

This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
2020-06-22 22:28:37 +01:00
Oleg Endo 3de5b98316 improve performance of CONNECTIVITY_DATA::GetNetItems
- CN_CONNECTIVITY_ALGO::ForEachItem
move implementation to header, so that a lambda can be inlined by the
compiler.  improves iteration performance x2

- CN_ITEM::Net
move implementation to header, so that it can be inlined by the
compiler.

- CONNECTIVITY_DATA::GetNetItems
don't use std::set to filter out duplicates.  use std::unique on sorted
vector.  use a bitset to perform type check.
2020-04-21 13:23:56 +00:00
Seth Hillbrand 8c19b4b6ae pcbnew: Adding arcs to PNS
This is allows ARCs in tracks to be synchronized with
the PNS router.  Note this does not yet include the UI components
to route curved traces
2020-02-21 16:11:41 -08:00
Jeff Young c29a0b1966 Fix geometry error in connectivity algorithm.
For custom pad shapes were were calculating cardinal points off
of the bounding box.  However, the bounding box must be rotated
around the pad's position, rather than its shapePos -- which is
an issue since any thermal spokes will be rotated around the
shapePos.

Of course we don't really need to sort that out because we're
doing an intersection of the pad's boundary polygon with a vector
from the shapePos out to the cardianl point -- so we really just
need the cardinal point to be "out there".  So I've changed it
to use use INT_MAX / 2.

Fixes: lp:1851703
* https://bugs.launchpad.net/kicad/+bug/1851703
2019-11-10 14:52:01 +00:00
Jeff Young a6a4973324 Handle rotation for N/S/E/W pad cardinal points.
Fixes: lp:1844727
* https://bugs.launchpad.net/kicad/+bug/1844727
2019-11-05 17:22:51 +00:00
Jeff Young 429c7055e9 Some performance enhancements contributed by Oleg Endo.
Fixes: lp:1846438
* https://bugs.launchpad.net/kicad/+bug/1846438
2019-10-04 19:41:40 +01:00
Seth Hillbrand 4d8949371f conn: Connect pads to anchor points not geo center
Pads may include offsets that allow the user to shift the connection
point of the pad.  This is captured by the pad m_Pos but not by
ShapePos().  When testing connectivity, we need to get the offset
position.
2019-09-19 13:49:12 -07:00
Seth Hillbrand 18b6bdf5dd Use cached bbox for connectivity
On large boards, connectivity checks are hotspots.  We use the cached
bbox to avoid re-computing polygons for pads.
2019-08-23 10:45:41 -07:00
Jeff Young 809a4e3c0e Improve connectivity tests for pads.
We now test N, S, E and W as well as center.

Fixes: lp:1840721
* https://bugs.launchpad.net/kicad/+bug/1840721
2019-08-23 17:44:10 +01:00