Prevent the hierarchy navigator from being rebuilt unless there are actual
sheet changes that would cause a change to the tree.
Save the tree expansion state before rebuilding the tree and then restore
the expansion state to the previous state sans edits.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16635
Between schematic and pcb editors, we want the following actions:
- Single click on ERC/DRC item should show the item in the ERC/DRC
window. But if the window is not visible, it should only update the
status bar
- Double click on ERC/DRC item should show and raid the ERC/DRC window
as well as select the line item
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17383
ADDED: Horizontal/vertical zoom for simulator plots, via mouse wheel,
toolbar buttons, menu commands, and hotkeys.
ADDED: Simulator preferences panel, populated with mouse wheel
and trackpad settings that control pan and zoom of simulator plots.
ADDED: Zoom In/Out Horizontally/Vertically commands that can be bound
to hotkeys.
CHANGED: Simulator plot scroll wheel gestures are no longer hard-coded
and can now be configured via the new Simulator preferences panel.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16597
Other unreported bugs that were fixed:
- Fixed wierd, jumpy simulator plot view limiting behavior.
- Fixed Zoom In Center and Zoom Out Center commands not preserving
the simulator plot center point.
- Fixed simulator plot nudging when exported as PNGs.
- Fixed rectangular selection zoom being able to exceed simulator plot
view limits.
Notes:
- Provided new SIM_PREFERENCES struct to be used for future
simulator preferences set via the simulator preferences dialog.
- Bundled pre-existing EESCHEMA_SETTINGS::SIMULATOR settings into
EESCHEMA_SETTINGS::SIMULATOR::VIEW.
- Replaced mpWindow::EnableMouseWheelPan with more general
SetMouseWheelActions.
- Refactored and tidied up wxMathPlot's mpWindow code involved with
fitting, zooming, and panning.
- Consolidated long lists of duplicated member variable initializers to
a new mpWindow private delegated constructor.
- Provided provisional Zoom In/Out Horizontally/Vertically toolbar
icons that need improvement by a graphics designer.
- Provided gitignore entries for the Qt Creator IDE
Prior to this change, the schematic connectivity was updated any time a
change was made to a connectable object. Now the connectivity is only
updated when an object change actually affects the connectivity. Other
properties like line width, fill type, custom fonts, etc. will not cause
the connectivity graph to be rebuilt.
The SCH_COMMIT flag SKIP_CONNECTIVITY has been removed. All schematic
objects can test if they are connectable and if there have been changes
to any connection properties that require a connectivity rebuild.
Remove duplicate rebuild connectivity calls from editor control tool.
This was causing the tangling end test to get called four times on every
undo and redo action because the dangling end test is already called in
the connectivity graph calculation code.
Update connectivity when changing label names which fixes an unreported
connectivity bug.
Short description:
Works for Symbol and Footprint Editor behind an advanced config option.
For Symbol Editor it is shown for a single item selection (library or symbol).
For Footprint Editor it is shown for a footprint selection.
(fp editor allows a single tree item selection only).
Option stays hidden if current frame has been modified.
Also small fix(?) for similar action to the project manager.
(Call for the Execution has moved inside the file loop.)
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/15736
Avoid O(N^2) by spatial sorting, don't run checks if the bounding boxes
don't overlap.
A second copy is ordered by type to help classes that only want to check
a few types having to walk the whole list.
(Don't require the same text to be put into the tooltip.
It's error-prone and also disallows us from having a separate
tooltip for toolbar buttons.)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17009
(cherry picked from commit f4a085575a)
Apparently we forgot to handle schematic connectivity changes when redoing
undone changes. The same connectivity update logic that was added to the
commit object is now used in SCH_EDIT_FRAME::PutDataInPreviousState().
Please note the granularity of connectivity rebuilds on schematic object
property changes is at the object level which is overly aggressive. This
means that connectivity rebuilds will happen when connectivity changes
that have nothing to do with and objects connectivity are changed. Until
objects can handle their own connectivity state, this will have to suffice.
AppleClang seems to generate different typeinfo for forward declarations
of classes than the actual class object, so the any_cast for the pointer
parameter fails due to the types not matching (even when they look the
same when printed in the error).
Instead, we must always ensure we use the actual object when defining
the parameter type when placing the object into the event.
This change no longer sorts pasted sheets by page number. This was done
because pasted sheets may not be numbered. When sheets are not numbered
they are sorted by UUID path which results in some unexpected results.
Since the pasted sheet code uses recursion, pages will be numbered in the
order they are added.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16580
Pasted sheets do not have assigned SCH_SCREEN objects until after they
are loaded.
Do not recalculate connectivity unless the SCH_COMMIT object actually has
connectable schematic object changes.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16579
The new behavior is to only expand to the first child of the root sheet
level. On very complex hierarchies, this makes the navigator far more
useful.
Do not update schematic hierarchy navigator on every edit. Now only
sheet changes will trigger a rebuild of the tree.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16371
The IO_RELEASER is a thin-wrapper around a std::unique_ptr, but done
this way to allow easier addition of a custom deleter in the future if
something needs to call back into the IO_MGR.
Pasting from the clipboard when copying from another project can leave
sheet instance information that is not valid for the current project.
This change prunes all sheet instance information that is not relevant
to the current project. It also prunes invalid paths created by pasting
sheets from different paths in the same project.
Also fixes some issues with menus being owned by the wrong
tool.
Also removes "no xxx selected" warnings in submenus which
aren't show unless xxx is selected to start with.
Also fixes some un-translated strings (which happily
already exist elsewhere in the UI)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16454
Also fixes a memory leak in Symbol Editor undo/redo.
Also moves a few more things to SCH_COMMIT.
Also fixes a couple of LIB_ITEM::Clone() methods that were
failing to return the same uuid.
produces a crash when the library links are updated, and a power symbol is not found
in any loaded library.
Add also an option to export all symbols or all not pwer symbols
Fixes#16229https://gitlab.com/kicad/code/kicad/-/issues/
The paste code creates invalid KIID_PATH objects with a zero length. All
paths must include the root KIID at a minimum. Code was added to prune
the invalid paths and some defensive code was adding to the formatter to
prevent the crash in case there are other paths where someone generates
a zero length path.
Pruning orphaned instance data does not work when loading schematics prior
to version 7 because the paths did not include the root sheet UUID. Once
the file is saved to V7 or later, the next load will prune any orphaned or
invalid instance data for the current project.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16245
It appears that in our zeal to prevent file changes when saving shared
schematics, we (I) clobbered saving relative symbol instance data paths
to the clipboard. This has be restored along with setting the correct
symbol unit for relative clipboard paths.
Fixed a serious issue with KIID_PATH::MakeRelativeTo() where the original
path was not restored when the incremental KIID object test fails. This
also included a minor optimization using the actual KIID object for
comparison instead of converting it to a string and then comparing the
string.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15981
IPC2581 is a modern production file exchange system. It provides
single-file data output for an entire board including BOM and netlist
information.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1954
jean-pierre charras
Wayne Stambaugh
Seth Hillbrand
Jeff Young
ecorm
Jon Evans
Ethan Chien
Petri Hodju
aris-kimi
Yon Uriarte
Alex Shvartzkop
Graham Keeth
Mike Williams
Ian McInerney
Jan Wichmann
Marek Roszko