This is *a work in progress*, so some features are missing, and/or could be modified.
Mainly keepout zones are not yet exported to autorouters, and pads are not taken in account.
Some code cleanup in polygon.*
Coordinates were using always 3 digits (1/1000 inch for mantissa). Uses now 4 digits max in inches and 3 digits max in mm
The resolution is therefore 1/10000 inch or 1/1000 mm. Note this is a limitation of Excellon format.
When reading board files, the net 0 was stored twice.
It creates only log messges in debug mode, because the list of nets is rebuild after reading files.
Use now English layers names to build filenames in plot functions (for techical layers), because translated names create sometimes problems in filenames.
(should do not change anything for English users)
* Use index when saving layers to handle translated layer names.
* Add LOCALE_IO switcher when loading s-expression format.
* Make SEGVIA default to through hole to improve file size.
* Don't save default orientation of 0 degrees in TEXTE_MODULE and TEXTE_PCB.
* Don't save default zone configuration parameters.
* Save multiple zone corners on a single line.
* Fixed missing ( check in graphic and module arc parsers.
* Consistency improvements for DRAWSEGMENT and EDGE_MODULE objects.
* Minor tweaks to D_PAD formatting.
* Change save order of drawings to match legacy file format object order.
* Set end point of SEGVIA to start point so the round trip back to legacy
format is the same.
* Fixed bug saving and loading oval pad drill parameters.
* Fixed bug saving and loading rectangular pad deltas.
* Fixed missing layer for PCB_TARGET.
* Fixed EDA_TEXT italic bug. Thanks Dick!
* Remove some left over debug logging statements.
* Apply Dick's patch along with a few minor changes to fix some clashes with
changes in my branch. Thanks Dick!
* Added missing DRAWSEGMENT line angle.
* Fix thru hole pad layer mask issue.
Tracks should be loaded in the same order as they were saved, no exceptions.
This is for the version control system user.
But even with this objective now implemented in LEGACY_PLUGIN, the TRACKS
are still going through a food processor after they are loaded, and the poor
version control system user has no relief, even with this patch.
TRACKS are always modified after being loaded, and I think this needs to be fixed still.
* Add s-expression file parser object and keyword files.
* Fix minor issues with s-expression file formatting.
* Fix a minor bug the zone container fill state parsing in the legacy plugin.
* Move EDA_TEXT visibility definition to eda_text.h.
* Add minor BOARD_ITEM object improvements to support s-expression file
parser.
pad and via sizes from those settings when diameter is not given
in the local object. Calculation algorithms are inferred from the
UI help of the Eagle program.
For edge connector type of footprints, some copper pads can be on the
back side even within packages.
Flipping of packages to back was not being done correctly, but I think this
is working now.
There are still remaining issues with text positioning that I am working on.
* Derive the pcbnew copper zone and non-copper zone dialog windows from DIAG_SHIM,
which injects some template code.
* Update UIpolicies.txt to talk about DIALOG_SHIM support.
* Add zone support to eagle_plugin.
* Organize ZONE_CONTAINER class declaration for future privacy and accessors.
fix a compil warning.
CvPcb: fix regressions :
Shows now a void field instead of the dummy footprint name $nonane (whenthere is no footprint selected in netlist).
The active footprint selection changes only if a new component is selected from the component file,
and does not change just when the next component is automatically selected, after a footprint selection.
Speed up delete association and auto associe.
This may have been an undocumented bug from more than a year ago, which manifested itself in *.mod files containing duplicate names.
LEGACY_PLUGIN loads those now quietly, but appends "_v2", "_v3", etc. to each succeeding duplicate sharing the same name.
base on expected text and current window font.
Expand the virtual world to 2.14 meters in the nanometer build of PCBNEW.
This seems to be holding up for now.
Delete LEGACY_PLUGIN cache after deleting library of same name.
Remove automatically generted freerouter help header.
Add Normalize() to BOX2.
Clamp some values in the virtual space of drawframe.cpp
Should allow Pcbnew code easier to change and Gerbview code more understandable and easier to maintain.
Code cleaning (remove dead code, add comments).
Minor other enhancements.
Other scaling factors (MILS_TO_IU_SCALING_FACTOR and DECIMILS_TO_IU_SCALING_FACTOR)
also defined only in convert_to_biu.h.
Allows different scaling value for Gerbview.
Needs more tests.
as a starting point
* Make double Distance() take double arguments and remove internal range checking.
* Start on EDA_DRAW_FRAME::AdjustScrollBars() and use "double" for most all calculations
in anticipation of setting INT_MAX INT_MIN limits eventually.
* Move board item object Format() functions into PCB_IO object.
* Change file format to use layer names instead of numbers.
* Change file extension to kicad_pcb.
// This provides better project control over rounding to int from double
// than wxRound() did. This scheme provides better logging in Debug builds
// and it provides for compile time calculation of constants.
#include <stdio.h>
#include <assert.h>
#include <limits.h>
//-----<KiROUND KIT>------------------------------------------------------------
/**
* KiROUND
* rounds a floating point number to an int using
* "round halfway cases away from zero".
* In Debug build an assert fires if will not fit into an int.
*/
#if defined( DEBUG )
// DEBUG: a macro to capture line and file, then calls this inline
static inline int KiRound( double v, int line, const char* filename )
{
v = v < 0 ? v - 0.5 : v + 0.5;
if( v > INT_MAX + 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' > 0 ' for int\n", __FUNCTION__, filename, line, v );
}
else if( v < INT_MIN - 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' < 0 ' for int\n", __FUNCTION__, filename, line, v );
}
return int( v );
}
#define KiROUND( v ) KiRound( v, __LINE__, __FILE__ )
#else
// RELEASE: a macro so compile can pre-compute constants.
#define KiROUND( v ) int( (v) < 0 ? (v) - 0.5 : (v) + 0.5 )
#endif
//-----</KiROUND KIT>-----------------------------------------------------------
// Only a macro is compile time calculated, an inline function causes a static constructor
// in a situation like this.
// Therefore the Release build is best done with a MACRO not an inline function.
int Computed = KiROUND( 14.3 * 8 );
int main( int argc, char** argv )
{
for( double d = double(INT_MAX)-1; d < double(INT_MAX)+8; d += 2.0 )
{
int i = KiROUND( d );
printf( "t: %d %.16g\n", i, d );
}
return 0;
}
*) for footprint access into *.mod files and
*) BOARD save/load
The item_io.cpp and ioascii.cpp have been set off to the side for reference
as *.notused, for awhile.
The CMake options USE_NEW_PCBNEW_LOAD and USE_NEW_PCBNEW_SAVE are gone,
this is now the mandatory usage of the LEGACY_PLUGIN. This should reduce
code maintenance for awhile until the s-expression plugin comes into
play. But at least for legacy format, there is not two code bodies
to maintain any more.
A new LEGACY_PLUGIN footprint library caching scheme is in place which
needs some testing. It should not be any faster, but might give better
results in a networked environment if there is *.mod files on the server.
* Remove internal units from BASE_SCREEN and it's derivatives.
* Remove internal units from EDA_DRAW_FRAME and it's derivatives.
* Use build time code to replace internal units conversions.
* Fix scaling bug in page layout sample window that I created in my
last commit.
* Move all convert from user to internal units into base_units.cpp.
* Remove internal units parameters from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Remove internal units from all dialog text control helper classes.
* Move all convert from internal to user units functions into separate file.
* Remove internal units parameter from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Compile these conversion routines separately for the appropriate pcb or
schematic internal units.
* Move internal units specific status bar update code into the appropriate
application for updating the status bar.
* Move millimeter user units rounding function to common.cpp.
* Move EDA_TEXT object into separate header and source file.
* Compile EDA_TEXT class separately for BOARD_ITEM and SCH_ITEM units.
* Compile PAGE_INFO class separately for BOARD_ITEM and SCH_ITEM units.
* Minor formatting tweaks to Pcbnew s-expression file.
* Move internal unit formatting functions into BOARD_ITEM and SCH_ITEM.
* Fix bug in PCBNEW dialog_pad_properties.cpp that I introduced several days ago.
The m_Master_Pad stuff is stored in the PCB_EDIT_FRAME's BOARD_DESIGN_SETTINGS,
not in the FOOTPRINT_EDIT_FRAME's BOARD_DESIGN_SETTINGS (i.e. not stored in
the module editor's dummy BOARD). Now we properly initialize the
DIALOG_PAD_PROPERTIES::m_Pad_Master reference to the correct master pad
dope, instead of to the dummy module BOARD's master pad, which is not used.
* Save dialog now supports saving boards to new file format.
* Add CMake option to build s-expression file save.
* Add check to main CMakeList.txt file to make sure nanometers are
enables when the new file format is built.
* Minor tweaks to object format functions for improved output.
* Rename kicad_plugin.h/cpp to legacy_plugin.h/cpp.
This uses the new LEGACY_PLUGIN, so we can force more usage & testing of it
before ioascii.cpp and item_io.cpp are deleted, along with
BOARD_ITEM::Save() and BOARD_ITEM::ReadDescr() associated functions.
* support for 3 terminal regulators
* add a data file management to store parameters for regulators ( name, vref value, Iadj value, type)
Needs some refinements, but it is already very useable.
Commit dialog page setting patch from Alexander Zakamaldin
* Add s-expression Format() function to all objects derived from
BOARD_ITEM.
* Add s-expression Format() function to base objects as required.
* Add functions to convert coordinates from base internal units
(nanometers) to millimeter string for writing to s-expression
file.
* Add temporary dummy conversion functions to prevent link errors
until schematic and board object and action code can be separated
into DSO/DLL.
* Add CMake build option to build Pcbnew with nanometer internal
units.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
issue in cast to wxRect fixed (EDA_RECT accepts negative size, but not wxRect, so the wxRectcast is normalized now).
This fixes some bugs.
A minor other bug fix in Pcbnew.
subclass DIALOG_SHIM support.
Tried dialog_drc but it has nesting problems due to use of DRCLISTBOX, which
needs to be put into its own header file to untangle.
DLIST iterator code, now we can do:
for module in pcb.m_Modules:
print module.GetReference()
instead of:
module = pcb.m_Modules
while module:
print module.GetReference()
module = module.Next()
or even:
module_list = list(pcb.m_Modules)
* All objects derived from EDA_ITEM now have consistent hit test method
definitions.
* Remove double function calls from all classes derived from SCH_ITEM.
* Lots of Doxygen comment fixes.
* make 2 bitmaps more visible.
* fix incorrect screen redraw when rotating a component.
* netlist : the pcbnew advanced format can be now stored (persistant option) in project config.
Pcbnew:
* graphic_item_properties_base.fbp * dialog pad edit: make some strings more easier to translate.
* global pad edition: fix a bug that change pad position instead of pad size (round pas only).
Eeschema:
* fix a bug: new created wires were not alwaes shows until the screen was redrawn.
wxWidgets 2.9 knows wxSVGFILEDC device context.
Unfortunately, arcs are drawn as pies (this is a feature, not a bug).
This is not correct for Kicad.
So Kicad has its own wxSVGFILEDC (named KicadSVGFileDC) that is basically the same as wxSVGFILEDC,
but with arcs drawn as arcs, not pies.
Note also under wxWidgets 2.8 does not know wxSVGFILEDC , so kicad had already its own SVG device context.
* Pcbnew: in hight contrast mode the 'V' hotkey did not always refresh the screen.
* Eeschema: incorrect print scale when the option 'Show page limits' is disable.
derived classes' implementations of these functions become non virtual and
can be truly _inlined_ for speed! All GetPosition() in derived classes were also
changed to return const wxPoint&, that is, a reference rather than a
full copy of the position wxPoint. There was no need for polymorphism in
{Get,Set}Position() since we never call these functions via generic pointer.
* Remove BOARD::{Get,Set}Position() since they were only there to satisfy
the pure virtuals established in BOARD_ITEM, which are now gone.
* Added const wxPoint& CPolyLine::GetPos(), made CPolyLine::Get{X,Y}() inline.
* Derive CPolyPt from wxPoint so we can return "const wxPoint&" fromt
CPolyLine::GetPos().
Eeschema: Viewlib is now accessible from Libedit (to browse libs or load a component to edit)
Libedit: uses now the same dialog as the schematic editor to load a component
Some code cleaning.
which is in turn already within BOARD.
* encapsulate class D_PAD with accessors, making data private.
* make D_PAD::GetBoundingRadius() do its longer calculation lazily, based on
m_boundingRadius == -1.
Design rules: increase number of vias and tracks sizes
Pcbnew: netlist reader: change from my recent commits to keep netnames in pads for footprints not in netlist
(allow an user to place some footprints by hand, set pads netnames and do not lost these netnames when loading a netlsit)
Fix other very minor issues.
the match between wxString::Format() or wxString::Printf() format strings
with passed arguments, but does this at runtime, not compile time.
Fix some mismatches. size_t is a 64 bit type on x86_64 whereas int and
unsigned are 32 bit types. On 32 bit machines they are all 32 bits so
this error is probably not triggered.
* Added a dialog to select options: one or 2 files, units (mm or inch), and force INSERT option.
* code cleaning
* Modify corresponding icon in menu to show a footprint, not a schematic component.
jean-pierre charras
Miguel Angel Ajo
Marco Mattila
Dick Hollenbeck
Wayne Stambaugh
Andrey Fedorushkov
Lorenzo Marcantonio
brian.
Jerry Jacobs
lajos kamocsay
Alexander Zakamaldin
Joe Ferner
Fabio Varesano