It happens if the first segment of the new trace is inside a pad: the other segments are not found.
And the erased trace is not the right trace.
However this fix is more a workaround than a fix: currently the detection of the trace boundaries (BOARD::MarkTrace())
does not work very well for segments inside a pad.
Fixes: lp:1776121
https://bugs.launchpad.net/kicad/+bug/1776121
Any errors in the dialog should be handled and, at worst, allowed to
redo. SPICE_VALUE throws KI_PARAM_ERROR, so we catch that explicitly.
Fixes: lp:1776051
* https://bugs.launchpad.net/kicad/+bug/1776051
New items just being placed on the board are still temporary. Although
we can modify their orientations/positions, we can't stage these changes
for undo/redo without corrupting the undo stack.
Fixes: lp:1776312
* https://bugs.launchpad.net/kicad/+bug/1776312
Previously, the "Select Connection" sub-items were greyed out when the
selection contained both tracks and vias. This meant that you couldn't
access "Select Copper Connection" when the selection contained both
tracks and vias (though the keyboard shortcuts did work).
Change to use SELECTION_CONDITIONS::OnlyTypes( GENERAL_COLLECTOR::Tracks
) to allow any combination of track elements to be selected.
Fixes: lp:1772249
* https://bugs.launchpad.net/kicad/+bug/1772249
This refactors the symbol field editor's checkbox state-saving code to
deal with multiple projects with disjoint field sets more consistently.
For instance, imagine I have a two projects
* Proj1 has fields A, B, C
* Proj2 has fields A, B, D
Under the old scheme, when I switch from one project to the other the
state of fields C and D will be forgotten. With the new approach,
however, they are retained.
Not to mention, the implementation is considerably simpler. Fixes
wxGLCanvas::IsDisplaySupported() handles wxGL_{MINOR,MAJOR}_VERSION
attributes only in 3.0.4. Since 3.1.0 the attributes are apparently not
supported, so instead wxGLContext::IsOK() is used (introduced in 3.1.0).
Fixes: lp:1775995
* https://bugs.launchpad.net/kicad/+bug/1775995
This makes it significantly easier to find a particular component when
using the field editor, as I often do for part selection.
Fixes: lp:1772169
* https://bugs.launchpad.net/kicad/+bug/1772169
There are a bunch of problems with event processing and closing
documents, etc., when enabled. See the bug report for more
info.
Fixes: lp:1774777
* https://bugs.launchpad.net/kicad/+bug/1774777
We can invalidate a node by rotating. Make sure that our endpoints for
the ratsnest are valid before attempting to draw.
Fixes: lp:1775727
* https://bugs.launchpad.net/kicad/+bug/1775727
When you search for an item that exists on a separate sheet in the
schematic, the newly loaded schematic sheet needs to have the dangling
flags set so that we don't have a mess of non-connected "o" markers.
Clearing annotations should only clear the settings that can be set by
the matching annotate function. Even in components where the units are
functionally the same, the unit choice should be retained as there are
often other considerations when chosing the unit.
Fixes: lp:1769457
* https://bugs.launchpad.net/kicad/+bug/1769457
PNS routing options allow trace width to be chosen by the assigned
netclass. This extends that to differential pair width/gap settings as
well.
Fixes: lp:1672126
* https://bugs.launchpad.net/kicad/+bug/1672126
Processing enter from within the dimension editor window is only set to
the default action for top-level items. Within the sizer, enter is
handled by the first registered button (Cancel) unless explicitly set.
Fixes: lp:1774035
* https://bugs.launchpad.net/kicad/+bug/1774035
The splitter window can not be the parent to any additional windows.
If it acquires a child that persists past the lifetime of the splitter
window, we get a segfault.
Also hooks up the Python netlist reader to the descriptions so
that they appear correctly in BOMs. (The BOM generators used
to always get the root component's description rather than the
alias's description.)
Fixes: lp:1774358
* https://bugs.launchpad.net/kicad/+bug/1774358
Limit the bbox size of origin view item to item size. This prevents
excessive redraw.
This also side-steps a degeneracy in the RTree calculation under certain
conditions in i386 where multiple, maximum-sized items are degenerate.
Fixes: lp:1774316
* https://bugs.launchpad.net/kicad/+bug/1774316
When clearing the pcb in footprint editor, we need to transfer the
netclass settings to ensure we have the correct defaults for the new
footprint.
Fixes: lp:1751583
* https://bugs.launchpad.net/kicad/+bug/1751583
std::invalid_argument does not work fine with translated strings as argument for message.
(the translated message is incorrectly or not displayed if it contains non ascii8 chars, at least on Windows).
KI_PARAM_ERROR can be throw-ed with a translatable/translated string (a wxString)
This fixes some warnings on GCC 8.1:
warning: catching polymorphic type ‘class std::out_of_range’ by value [-Wcatch-value=]
catch( std::out_of_range )
^~~~~~~~~~~~
This fix is along the same lines as:
* ff1802d7a "Fix Coverity "Big parameter passed by value" warnings"
There are three related changes here to harden our handling of threads
in the footprint async loader.
1) Footprint async loader explicitly aborts any remaining loader threads
on exit.
2) We protect the thread join by a mutex
3) We do not pause during no-wait routines
Pads count all pads/pins on the board including unconnected and NPTH.
Nodes count only the pads that can connect to a net and are therefore
routable. These were being calculated as the same number (displayed in
the info bar at the bottom of the screen)
Connectivity searches were slow for large, complex boards. This was
partly due to the need to search all lists for possible connections
between anchors.
We remove this requirement by creating an RTree based on items' bounding
boxes similar to the PNS router. Then we get both the colliding items
and search forward/backward to see if there are connections between the
anchors and the other item.
Because we use RTree, we no longer need the maintenance overhead of multiple
item lists and an anchor list in the connectivity class.
Fixes: lp:1701791
* https://bugs.launchpad.net/kicad/+bug/1701791
Fixes: lp:1769408
* https://bugs.launchpad.net/kicad/+bug/1769408
Fixes: lp:1761989
* https://bugs.launchpad.net/kicad/+bug/1761989
jean-pierre charras
Seth Hillbrand
John Beard
Jeff Young
Ben Gamari
Maciej Suminski
Damien Espitallier
Simon Richter
Wayne Stambaugh