Center point of a block may not always be located on a grid point,
therefore it needs to be rounded to the grid size to prevent off grid
component placement.
The old code delayed duplicating till the end which means the
rotate/mirror would affect the original, and then be duplicated
leaving the original incorrectly rotated/mirrored.
Block rotate and mirror now work like they do in Pcbnew (that is
they're treated as part of the block move/duplicate/whatever
rather than finishing it).
Fixes: lp:1780794
* https://bugs.launchpad.net/kicad/+bug/1780794
1) when duplicating don’t keep original hidden until end of drag
2) reset selectionArea when showing it so it doesn’t flash in its previous location
3) center a pasted block on the cursor
4) don’t draw the source selectionArea when pasting a block
5) implement selection-style highlighting for contents of blocks
6) add pasted items to view so they don’t disappear when the block is placed
Fixes: lp:1747197
* https://bugs.launchpad.net/kicad/+bug/1747197
Primary change is to replace most control/window borders with
AUI pane borders. We implement our own AUI border drawing
routine which avoids the ugly one-pixel white frames around
dark canvasses.
Also increases the signal-to-noise ratio of all the pane
creation code in the various frames.
Spooling up a full PLAYER in the background takes too long.
This also fixes bugs around how the tables are saved, although
that was just missing code rather than anything architectural.
Fixes: lp:1785436
* https://bugs.launchpad.net/kicad/+bug/1785436
If a schematic contains two symbols with the same name from different
libraries, the cache will contain the last symbol saved with that name.
Prepend the library nickname with the original schematic symbol library
nickname when saving the cache library to prevent name collisions.
Remove all symbol libraries from the project file after remapping to
prevent symbols that should be loaded from the cache being loaded from
a library further up the search order. Save the project file to clear
all of the libraries so they never get reloaded again.
Remove the symbol library management dialog and menu entries.
Rename the symbol library table dialog menu entry.
Remove all symbol libraries from default project file to prevent clashes
with the cache library.
Fix illegal symbol naming in Eagle plugin.
Refactor rescue objects so that they can support derivation.
Factor out legacy rescuer code to perform legacy project rescues.
Create new symbol library table rescuer for rescuing symbol library table
based projects.
Perform the correct rescue type on project load.
Add symbol library table remapping support to the tools menu for run on
demand as applicable.
Add flag to SCH_SCREENS::UpdateSymbolLinks() to allow forcing the symbol
link updates when the library modification hash has not changed.
Simplify some of the library editing code. There have been a few minor
changes in the behavior of the editor. If the current symbol is deleted
from the library, the next symbol in the library is not loaded. The
deleted symbol is cleared and the current symbol is empty.
Change component to symbol to align with the preferred terminology
discussed on the developer's mailing list.
Add separate update UI event for save library as to enable the menu entry
whenever a library is selected.
Change the select symbol list dialog to a single column using the LIB_ID
format LIB_NICKNAME:LIB_ITEM_NAME so that the selection can be parsed by
LIB_ID.
Add method to expand URI to LIB_TABLE_BASE.
Override wxApp::OnExceptionInMainLoop() in debug builds to make debugging
easier when an unhandled exception occurs in a wxUpdateUIEvent handler.
Change SCH_SCREENS::HasNoFullyDefinedLibIds() to return false when the
schematic has no symbols to prevent the remapping dialog from being run.
Use SCH_COMPONENT part reference when creating netlist rather than looking
up the library symbol.
Create a new dialog to edit global and project specific symbol library
tables.
Add menu entries for new symbol library table editor in schematic editor
and symbol library editor main frame menus.
Add command event handler for symbol library table editor dialog to
SCH_BASE_FRAME so it is accessible from derived frames.
Fix bug in default environment variables initialization. A test for
existing user defined environment variables was preventing any new
default environment variables added to the list from being initialized.
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas. When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
* Push center on zoom, use middle mouse button to pan, limit panning, and
pan while moving object settings from schematic editor to symbol library
editor and symbol library viewer child windows.
* Push center on zoom, use middle mouse button to pan, limit panning, and
pan while moving object settings from board editor to footprint library
editor and footprint library viewer child windows.
Now these parameters are stored in user config, not project config ( they are not really related to a given project, they are just a setup during an edition),
and the schematic editor and the component editor have now separate parameters, because they are separate editors with different constraints.
component editor: repeat pin enhancement (from and idea of Edward Johns)
They are now member of EDA_DRAW_FRAME.
This change could fix Bug #1330781 (Background color change in Eeschema affects background color in Pcbnew)
Show page limits has meaning only for the schematic editor, the board editor and the page layout editor.
Draw background color selection exists only in eeschema and page layout editor.
In pcbnew, only a black background is allowed.
A side effect is now the user should set the background color in schematic editor, and the library editor (2 different options).
The default is still the white color.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
Eeschema, Pcbnew, and Cvpcb all run under the same process now,
FOR THE VERY FIRST TIME!
*) Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().
*) Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.
*) Found that the following command line is helpful for collecting all the *.kiface
files into the <build>/kicad/ directory so that kicad can find them.
$ cp `find . -name '*.kiface'` kicad/
Maybe somebody will want to rework how the CMake files are organized so all
the binaries can go into the same place. See python-a-mingw-us.
*) This might fix the problem on the Mac where child process windows were not
coming to the front. See ->Raise() in kicad/mainframe.cpp.
*) You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
instead of using the KIFACE modules directly, i.e. revert.
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
- Removed spurious int casts (these are truncated anyway and will break
doubles)
- Applied the Distance, GetLineLength, EuclideanNorm, DEG2RAD, RAD2DEG
ArcTangente and NORMALIZE* functions where possible
- ArcTangente now returns double and handles the 0,0 case like atan2, so
it's no longer necessary to check for it before calling
- Small functions in trigo moved as inline
* Move all convert from internal to user units functions into separate file.
* Remove internal units parameter from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Compile these conversion routines separately for the appropriate pcb or
schematic internal units.
* Move internal units specific status bar update code into the appropriate
application for updating the status bar.
* Move millimeter user units rounding function to common.cpp.
Eeschema: Viewlib is now accessible from Libedit (to browse libs or load a component to edit)
Libedit: uses now the same dialog as the schematic editor to load a component
Some code cleaning.
Jeff Young
Seth Hillbrand
jean-pierre charras
Maciej Suminski
Tomasz Wlostowski
Simon Richter
Wayne Stambaugh
Jon Evans
Jon Neal
Dick Hollenbeck
Lorenzo Marcantonio
Wayne Stambaugh