Commit Graph

934 Commits

Author SHA1 Message Date
jean-pierre charras 6fbc7bb4ce Gerbview, read Excellon files: fix a few issues.
The main issue is the fact Excellon files have no coordinate fine format definition.
Only the units are defined.
Units are floating point numbers or integer numbers.
Integer numbers can be defined as 3.3 or 2.4 numbers (mm/inches)
However some files (altium drill files for instance) use an other notation.
This fix is a workaround to accept 2.x (inch) or 3.x (mm) notations.

Fixes: lp:1754121
https://bugs.launchpad.net/kicad/+bug/1754121

Fixes: lp:1782053
https://bugs.launchpad.net/kicad/+bug/1782053
2018-07-17 17:41:33 +02:00
jean-pierre charras 3af2026061 Revert "Perform coordinate format detection on Excellon drill files"
This reverts commit 3e033aee0c.
2018-07-17 17:41:32 +02:00
Carsten Schoenert 9f7109826d fix misspelled 'allows to' -> 'allows one to'
Fixup small grammar issues around used 'allows to ...' almost in
code comments.
2018-07-11 10:35:03 -04:00
jean-pierre charras ef38a198d1 GerbView: incorrect handling of polygon primitive: broken parameters rotation and drill size.
Fixes: lp:1778459
https://bugs.launchpad.net/kicad/+bug/1778459
2018-06-25 11:00:53 +02:00
Maciej Suminski e4a6f2e523 Switch canvas to Cairo if OpenGL is not supported on the first run 2018-06-04 12:17:58 +02:00
Maciej Suminski 27c9c6ceed Enable the accelerated canvas on the first gerbview run if requested
Commit 8910894f applied to gerbview.
2018-06-04 10:47:44 +02:00
jean-pierre charras 8f984c2899 OpenGL, DrawGrid(): use grid and axis alpha color value setting, instead of the fixed 1.0
In Cairo mode, this function uses already the alpha color value setting.
Now for low alpha values (usually they are low, as said in many GAL comments),
Cairo mode and OpenGL mode should have a similar look.
2018-06-01 18:29:04 +02:00
jean-pierre charras bfa89039c4 Gerbview, GAL mode: fix "Zoom to fit" area size calculation when nothing is loaded.
Also ensure the worksheet is displayed after clearing the gerber layers.
2018-06-01 11:39:08 +02:00
jean-pierre charras 9a228d8ec9 Gerbview: GAL mode: shows the page worksheet, similar to legacy mode. 2018-06-01 09:11:43 +02:00
jean-pierre charras fc71fc6474 Gerbview: Fit to page: use the page size when nothing is loaded.
Previously, due to a minor bug, a very small default size was used (therefore a high zoom value), that was not a good choice.
2018-05-31 11:22:33 +02:00
Jeff Young cd5f727880 Fix off-by-1 errors in zoom menus & use zoom steps in GAL canvas.
Also bumps the maximums a bit (at user request).

Fixes: lp:1773215
* https://bugs.launchpad.net/kicad/+bug/1773215
2018-05-25 13:01:58 +01:00
Jeff Young 81af2db614 Even out the Gerbveiw zoom steps and increase the max.
Fixes: lp:1773215
* https://bugs.launchpad.net/kicad/+bug/1773215
2018-05-24 19:04:10 +01:00
Seth Hillbrand 8506cdf3ae Avoid numerical dereference of selections
The SELECTION is a std::set.  Numerical dereference of item n is O(n) as
the iterator is not random access.  Therefore, a for loop using
numerical dereference is O(n!) and quickly slows.

We avoid this by storing items to remove separately while iterating and
then removing the items after we complete.

Fixes: lp:1692081
* https://bugs.launchpad.net/kicad/+bug/1692081
2018-05-22 16:37:45 -07:00
Seth Hillbrand 8c5037a48b Optionally sort reporter messages
It can be useful to have similar class messages grouped together so that
error messages in a larger report don't get lost among the
warning/info/action messages.

This patch allows sorting of messages for dialogs that benefit from
organization.  Default behavior of reporter messages remains
unchanged by this patch.

Fixes: lp:1772090
* https://bugs.launchpad.net/kicad/+bug/1772090
2018-05-22 13:55:02 -07:00
Jeff Young 5010a461e1 Make polar coordinates consistent.
Use theta instead of phi (which normally describes the azimuth
angle).

Fixes: lp:1545107
* https://bugs.launchpad.net/kicad/+bug/1545107
2018-05-18 12:22:14 +01:00
jean-pierre charras 7c52af2d50 Gerbview: cosmetic enhancement: add icons in Clarify menu. 2018-05-17 10:24:09 +02:00
jean-pierre charras 93e75af388 Rename plot_auxiliary_data.h file to gbr_metadata.h, according to the class names defined by this file 2018-05-17 08:07:29 +02:00
jean-pierre charras d8687e4eaf Gerbview: minor code cleanup 2018-05-14 09:05:11 +02:00
jean-pierre charras 8da242c593 Gerbview: accept any structured comment as X2 attribute.
A structured comment is a comment line starting by "G04 #@! " and in fact containing
a X2 attribute. It is used to create Gerber files contianing X2 metadata, but compatible
with X1 file format
2018-05-14 09:05:09 +02:00
jean-pierre charras a3770bf6e1 Gerbview: fix a crash when Gerbview starts by loading a gerber job file (run from a command line) 2018-05-07 12:47:11 +02:00
Jeff Young 106dd60e45 Only adjust LAYER_WIDGET font size if larger than indicator.
Also moves adjustment into LAYER_WIDGET so all the callers don't
have to deal with it individually.

Fixes: lp:1767965
* https://bugs.launchpad.net/kicad/+bug/1767965
2018-05-02 21:49:57 +01:00
Seth Hillbrand f911ef5186 Standardize print scale label for gerbview 2018-04-23 13:14:06 -07:00
Seth Hillbrand ca06e67ffc Standardize colons in gerbview display options dialog 2018-04-23 13:11:53 -07:00
Seth Hillbrand aa0d67bdde Standardize colons in gerbview print dialog 2018-04-23 13:10:53 -07:00
jean-pierre charras 2925b93571 Gerbview: Remove dead code that handled a experimental .gbrjob file, now no longer existing. 2018-04-23 13:04:21 +02:00
Maciej Suminski cfa9916836 Prevent issuing a print command before the previous one is finished
Fixes: lp:1765965
* https://bugs.launchpad.net/kicad/+bug/1765965
2018-04-23 11:25:28 +02:00
Maciej Suminski 3cc0554e33 Code formatting 2018-04-23 11:18:51 +02:00
jean-pierre charras 07dc12fdd3 Fix incorrect UI management of Zoom to Selection, created by fix 2a419156 2018-04-14 17:44:17 +02:00
jean-pierre charras e9ef555c6a Use Ctrl+F1 to display hotkey list also in Gerbview and Kicad manager 2018-04-14 17:12:28 +02:00
Jeff Young 2a419156e0 Don't try to check uncheckable menu items.
When updating toolbars make sure the events are coming from the
toolbar in question (and not the menus which share the same ID).

Fixes: lp:1763563
* https://bugs.launchpad.net/kicad/+bug/1763563
2018-04-13 21:42:31 +01:00
Maciej Suminski df8bc93e4b gerbview: Removed duplicate zoom-to-selection handler, made the toolbar button checkable
Fixes: lp:1763270
* https://bugs.launchpad.net/kicad/+bug/1763270
2018-04-12 11:52:08 +02:00
Carsten Schoenert a11714b1a4 fix misspelled 'an other' -> 'another' 2018-04-08 13:24:37 -04:00
Jeff Young baef22df9a Fix memory leak and push menu change to other apps.
Fixes: lp:1761848
* https://bugs.launchpad.net/kicad/+bug/1761848
2018-04-07 14:14:55 +01:00
jean-pierre charras a2f118d2fa Gerbview: fix not working menu item "Zoom to Selection" in main menu. This also fixes a wxASSERT for this menu item 2018-04-03 16:30:16 +02:00
jean-pierre charras f8a3ec4974 Add a method to facilitate Tools handling in main frame toolbars.
Fix also a bug in gerbview_frame.cpp, about a broken toolbar accessor (fortunately not used in current code)
2018-04-03 13:00:20 +02:00
jean-pierre charras 54f14b08ca commit forgotten change in my previous commit 2018-03-31 18:46:29 +02:00
jean-pierre charras fa39acfc2f Gerbview, export to pcbnew : export polygons as new DRAWSEGMENT polygonal shape.
It can creates issues on copper layers, but the only one other alternative is to ignore polygons in export,
and this is worst.
2018-03-31 18:43:12 +02:00
jean-pierre charras 5b8c35f64d Gerbview: minor fix: do not report error if in header INCH ot METRIC command has no parameter (,LZ or ,TZ format)
I am not sure it should be reported, because LZ or TZ format has no meaning in decimal format, and can be omitted.
2018-03-31 18:40:29 +02:00
Jon Evans 1ec217d70e Fix hit testing for zero-width gerber items 2018-03-29 22:04:51 -04:00
Wayne Stambaugh 8d8c422a19 Add zoom to selection menu entry to all editors.
Fixes lp:1753339

https://bugs.launchpad.net/kicad/+bug/1753339
2018-03-25 12:34:19 -04:00
jean-pierre charras 29ebca4053 Very minor fix: make a menu string more easily translatable 2018-03-22 21:00:41 +01:00
Jon Evans 5b653c0c1e Update MacOS icons
Fixes: lp:1750284
* https://bugs.launchpad.net/kicad/+bug/1750284
2018-03-22 11:45:42 -04:00
Jon Evans a931ac436a Add some safety checks to Excellon number format detection
Fixes: lp:1754121
* https://bugs.launchpad.net/kicad/+bug/1754121
2018-03-21 22:29:43 -04:00
jean-pierre charras 2ff74cb3fc Add support for .gbrjob new file format (JSON format) in Gerbview
Add experimental code to generate .gbrjob files in the new JSON file format
2018-03-19 15:14:20 +01:00
jean-pierre charras 5e34563f52 Fix a long calculation time that happens with some gerber files when closing Gerbview in legacy display mode. 2018-03-19 10:58:27 +01:00
Jon Evans 4e76a18d5d Add checks against missing D-Codes in flashed Gerber items
Fixes: lp:1756710
* https://bugs.launchpad.net/kicad/+bug/1756710
2018-03-18 21:55:27 -04:00
jean-pierre charras 827b818b5d Very minor fixes in Gerbview and Kicad:
Gerbview: fix X2 z order display of Adhesive (Glue) layers.
Kicad: very minor cosmetic enhancement in Create Project dialog.
2018-03-18 16:04:23 +01:00
Marco Ciampa 9e8bcbea04 Gerbview: fix typo in tooltip string. 2018-03-16 09:41:53 -04:00
Jon Evans 213b600b54 Revert active layer behavior so gerber/drill load behavior matches
Fixes: lp:1755713
* https://bugs.launchpad.net/kicad/+bug/1755713
2018-03-14 21:52:06 -04:00
jean-pierre charras fa41026f36 Fix issue in aperture macro with some strange gerber files.
Fixes: lp:1755623
https://bugs.launchpad.net/kicad/+bug/1755623
2018-03-14 14:55:51 +01:00