Commit Graph

29 Commits

Author SHA1 Message Date
Jeff Young d0d9bb25c0 Menu consistence (add Config Paths to LibEdit). 2018-05-03 15:07:24 +01:00
jean-pierre charras 8022f1cc01 fix code after renamin files 2018-01-30 11:49:51 +01:00
Simon Richter a9ccf1161b Fix quotes in UI messages
This replaces all single and angle bracket quotes in UI messages with
double quotes, for consistency.

Sorry to all translators.
2017-12-15 07:33:07 -05:00
Wayne Stambaugh 7ca7d9078e Eeschema: fix potential symbol cache library name collisions.
If a schematic contains two symbols with the same name from different
libraries, the cache will contain the last symbol saved with that name.
Prepend the library nickname with the original schematic symbol library
nickname when saving the cache library to prevent name collisions.
2017-12-08 08:32:23 -05:00
Maciej Suminski dfcd42f5ef Library Editor: save libraries added in the editor to sym-lib-tables 2017-11-21 23:18:55 +01:00
Wayne Stambaugh 8fd89c881d Final symbol library table changes before merge.
Remove all symbol libraries from the project file after remapping to
prevent symbols that should be loaded from the cache being loaded from
a library further up the search order.  Save the project file to clear
all of the libraries so they never get reloaded again.

Remove the symbol library management dialog and menu entries.

Rename the symbol library table dialog menu entry.

Remove all symbol libraries from default project file to prevent clashes
with the cache library.

Fix illegal symbol naming in Eagle plugin.
2017-11-09 18:50:21 -05:00
Wayne Stambaugh c1f7c1778a Revise symbol rescuer to support symbol library table.
Refactor rescue objects so that they can support derivation.

Factor out legacy rescuer code to perform legacy project rescues.

Create new symbol library table rescuer for rescuing symbol library table
based projects.

Perform the correct rescue type on project load.

Add symbol library table remapping support to the tools menu for run on
demand as applicable.

Add flag to SCH_SCREENS::UpdateSymbolLinks() to allow forcing the symbol
link updates when the library modification hash has not changed.
2017-11-09 18:50:20 -05:00
Wayne Stambaugh 36f6d4a1f4 Convert symbol library editor over to use symbol library table.
Simplify some of the library editing code.  There have been a few minor
changes in the behavior of the editor.  If the current symbol is deleted
from the library, the next symbol in the library is not loaded.  The
deleted symbol is cleared and the current symbol is empty.

Change component to symbol to align with the preferred terminology
discussed on the developer's mailing list.

Add separate update UI event for save library as to enable the menu entry
whenever a library is selected.

Change the select symbol list dialog to a single column using the LIB_ID
format LIB_NICKNAME:LIB_ITEM_NAME so that the selection can be parsed by
LIB_ID.

Add method to expand URI to LIB_TABLE_BASE.

Override wxApp::OnExceptionInMainLoop() in debug builds to make debugging
easier when an unhandled exception occurs in a wxUpdateUIEvent handler.

Change SCH_SCREENS::HasNoFullyDefinedLibIds() to return false when the
schematic has no symbols to prevent the remapping dialog from being run.

Use SCH_COMPONENT part reference when creating netlist rather than looking
up the library symbol.
2017-11-09 18:50:20 -05:00
Wayne Stambaugh f781691049 Eeschema: add symbol library table editor dialog.
Create a new dialog to edit global and project specific symbol library
tables.

Add menu entries for new symbol library table editor in schematic editor
and symbol library editor main frame menus.

Add command event handler for symbol library table editor dialog to
SCH_BASE_FRAME so it is accessible from derived frames.

Fix bug in default environment variables initialization.  A test for
existing user defined environment variables was preventing any new
default environment variables added to the list from being initialized.
2017-08-12 08:10:34 -04:00
Jon Evans 3ec28e2acf Refactor layer enumerations to all live in the same place 2017-03-30 16:01:48 -04:00
Jon Evans a52250a91e Change from EDA_COLOR_T to COLOR4D globally; arbitrary color support
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas.  When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
2017-02-22 17:35:00 +01:00
Jon Neal 0aa9fad668 Push UI preferences to child edit and view windows. (fixes lp:1468388)
* Push center on zoom, use middle mouse button to pan, limit panning, and
  pan while moving object settings from schematic editor to symbol library
  editor and symbol library viewer child windows.
* Push center on zoom, use middle mouse button to pan, limit panning, and
  pan while moving object settings from board editor to footprint library
  editor and footprint library viewer child windows.
2015-08-25 10:16:15 -04:00
jean-pierre charras 3372b77b43 Fix a minor issue on Windows: when a viewer or a lib editor is already open and iconized, and when one try to run it, it stayed inconized. It is now raised, like on Linux. 2015-07-16 21:29:40 +02:00
jean-pierre charras 94479d87c1 eeschema: fix minor Bug #1446779 (repeat parameters not initialized until a project config is read)
Now these parameters are stored in user config, not project config ( they are not really related to a given project, they are just a setup during an edition),
and the schematic editor and the component editor have now separate parameters, because they are separate editors with different constraints.
component editor: repeat pin enhancement (from and idea of Edward Johns)
2015-04-22 13:39:00 +02:00
jean-pierre charras 4e210a2d05 ModEdit: fix a refresh issue after deleting a pad (depending on the position of the pad, the pad was sometimes not immediately undrawn).
Fix a few coverity wanings (not initialized members in ctors)
2015-04-20 16:59:25 +02:00
Maciej Suminski c2bd2491f1 Added asserts in spots where DEGREES are not handled. 2015-02-19 16:03:45 +01:00
jean-pierre charras 678a763481 Pcbnew: better display of tracks/vias/grid in toolbar. All: modify the zoom value shown in toolbar or status bar (roughly now zoom 1.0 is near the 1:1 scale, on a 22 inches Monitor). Fix also many other minor and very minor issues 2015-01-06 08:38:58 +01:00
jean-pierre charras 9bcdef85cd Eeschema: canvas background color: all frame are now using the same parameter.
fix recent bug which prevent eeschema to save color preferences.
fix few other minor issues.
2014-09-26 12:35:11 +02:00
jean-pierre charras 7c99a242cf Remove 2 global variables: g_DrawBgColor and g_ShowPageLimits.
They are now member of EDA_DRAW_FRAME.
This change could fix Bug #1330781 (Background color change in Eeschema affects background color in Pcbnew)
Show page limits has meaning only for the schematic editor,  the board editor and the page layout editor.
Draw background color selection exists only in eeschema and  page layout editor.
In pcbnew, only a black background is allowed.
A side effect is now the user should set the background color in schematic editor, and the library editor (2 different options).
The default is still the white color.
2014-06-20 13:13:04 +02:00
Dick Hollenbeck 991926d320 Modular-Kicad milestone B), major portions:
*) Rework the set language support, simplify it by using KIWAY.  Now any major
   frame with a "change language" menu can change the language for all KIWAY_PLAYERs
   in the whole KIWAY.  Multiple KIWAYs are not supported yet.

*) Simplify "modal wxFrame" support, and add that support exclusively to
   KIWAY_PLAYER where it is inherited by all derivatives.  The function
   KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.

*) Remove the requirements and assumptions that the wxFrame hierarchy always
   had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
   and editors. This is no longer the case, nor required.

*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
   KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
   quickly.  It also gives control to the KIWAY as to frame hierarchical
   relationships.

*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
   the single KIWAY_PLAYER, see bullet immediately above.

*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
   gives the KIFACEs a chance to save their final configuration dope to disk.

*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
   these modal frames are distinctly different than their non-modal equivalents.
   KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
   so this is another important reason for having a dedicated FRAME_T for each
   modal wxFrame.

On balance, more lines were deleted than were added to achieve all this.
2014-05-03 12:40:19 -05:00
Dick Hollenbeck 0d6560a218 *) Switch kicad.exe to using KIFACE modules for all major top level windows.
Eeschema, Pcbnew, and Cvpcb all run under the same process now,
    FOR THE VERY FIRST TIME!

*)  Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().

*)  Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.

*)  Found that the following command line is helpful for collecting all the *.kiface
    files into the <build>/kicad/ directory so that kicad can find them.

      $ cp `find . -name '*.kiface'` kicad/

    Maybe somebody will want to rework how the CMake files are organized so all
    the binaries can go into the same place.  See python-a-mingw-us.

*)  This might fix the problem on the Mac where child process windows were not
    coming to the front.  See ->Raise() in kicad/mainframe.cpp.

*)  You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
    instead of using the KIFACE modules directly, i.e. revert.
2014-04-19 13:47:20 -05:00
Dick Hollenbeck 2c67c3ff80 * KIWAY Milestone A): Make major modules into DLL/DSOs.
!   The initial testing of this commit should be done using a Debug build so that
    all the wxASSERT()s are enabled.  Also, be sure and keep enabled the
    USE_KIWAY_DLLs option.  The tree won't likely build without it.  Turning it
    off is senseless anyways.  If you want stable code, go back to a prior version,
    the one tagged with "stable".

*   Relocate all functionality out of the wxApp derivative into more finely
    targeted purposes:
    a) DLL/DSO specific
    b) PROJECT specific
    c) EXE or process specific
    d) configuration file specific data
    e) configuration file manipulations functions.

    All of this functionality was blended into an extremely large wxApp derivative
    and that was incompatible with the desire to support multiple concurrently
    loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
    An amazing amount of organization come from simply sorting each bit of
    functionality into the proper box.

*   Switch to wxConfigBase from wxConfig everywhere except instantiation.
*   Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
    PGM_SINGLE_TOP,
*   Remove "Return" prefix on many function names.
*   Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
*   Fix building boost for use in a DSO on linux.
*   Remove some of the assumptions in the CMakeLists.txt files that windows had
    to be the host platform when building windows binaries.
*   Reduce the number of wxStrings being constructed at program load time via
    static construction.
*   Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
    these functions are useful even when the wxConfigBase comes from another
    source, as is the case in the KICAD_MANAGER_FRAME.
*   Move the setting of the KIPRJMOD environment variable into class PROJECT,
    so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
*   Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
    its child wxFrames and wxDialogs now have a Kiway() member function which
    returns a KIWAY& that that window tree branch is in support of.  This is like
    wxWindows DNA in that child windows get this member with proper value at time
    of construction.
*   Anticipate some of the needs for milestones B) and C) and make code
    adjustments now in an effort to reduce work in those milestones.
*   No testing has been done for python scripting, since milestone C) has that
    being largely reworked and re-thought-out.
2014-03-19 19:42:08 -05:00
Dick Hollenbeck efb34166ea *) retain grid origin in the BOARD and save it in legacy and kicad board files.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
   class EDA_DRAW_FRAME.  This is a prelude to getting rid of BASE_SCREEN or
   splitting it up.
2013-08-03 00:15:23 -05:00
Lorenzo Marcantonio 0e903dba5b Angle and distances cleanup (preparing for angles in doubles)
- Removed spurious int casts (these are truncated anyway and will break
  doubles)

- Applied the Distance, GetLineLength, EuclideanNorm, DEG2RAD, RAD2DEG
  ArcTangente and NORMALIZE* functions where possible

- ArcTangente now returns double and handles the 0,0 case like atan2, so
  it's no longer necessary to check for it before calling

- Small functions in trigo moved as inline
2013-05-01 19:32:36 +02:00
jean-pierre charras 93ebdb2cd0 All: better code to handle opened frames libview, libedit, modview, modedit.
Other minor fixes.
2012-09-12 11:53:11 +02:00
jean-pierre charras b810135e4e Code cleaning, minor fixes and minor coding style fixes. wxWidgets 2.9.4 compatibility fix( deprecated function MakeModal ) 2012-09-11 21:03:21 +02:00
Wayne Stambaugh 57d75a75a8 More internal unit improvements.
* Move all convert from internal to user units functions into separate file.
* Remove internal units parameter from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Compile these conversion routines separately for the appropriate pcb or
  schematic internal units.
* Move internal units specific status bar update code into the appropriate
  application for updating the status bar.
* Move millimeter user units rounding function to common.cpp.
2012-04-13 14:51:24 -04:00
jean-pierre charras f1e5be9a67 Fix @JP messages (no bugs, just comment lines)
Eeschema: Viewlib is now accessible from Libedit (to browse libs or load a component to edit)
Libedit: uses now the same dialog as the schematic editor to load a component
Some code cleaning.
2012-02-19 20:53:11 +01:00
Dick Hollenbeck 67e28ade74 ++eeschema
Add shim class SCH_BASE_FRAME which introduces the data model SCH_SCREEN
    to the frame class hierarchy.
2012-01-09 11:24:01 -06:00