4eb9440a42
router: include arc approximation tollerance in arc hull clearance calculation
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/10470
(cherry picked from commit ce28525172
2022-02-17 09:22:19 -08:00
7cba8e847d
Don't use bounding box cache during insideArea.
...
For starters we can't rely on it having been updated, but we also
cache the entire result so there's no huge cost-savings anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
(cherry picked from commit 8dcc933fc3
2022-02-13 18:20:31 +00:00
9e5e46514d
More wide-string declarations.
2022-02-05 13:29:00 +00:00
901685f01b
Don't convert KIID on the fly
...
Converting to string on save prevent unneeded ops
2022-02-03 10:34:14 -08:00
833ce19221
Be more diligent in preventing drag line errors
...
They can happen even when there are no collisions, so we need to reset
the 'ok' flag before using the line again.
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
2022-01-31 16:09:14 -08:00
38a4894d92
Prevent multiple single-point line solutions
...
Suggested by @rivimey, we test the case where both lines return singular
point lines and prevent them leaking into our drag solution
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
2022-01-29 07:07:03 -08:00
8ae304dcca
Don't allow degenerate lines in dragger
...
If walkaround returns an invalid line, don't consider it for a track
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
2022-01-28 15:18:42 -08:00
20bbf9b179
PNS: Do not clear layer pairs when importing new sizes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10225
2022-01-13 20:37:37 -05:00
cf4d46b24d
PNS: Do not allow smart pads when in 90-degree mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10386
2022-01-13 20:21:19 -05:00
45182febaf
Exit router and invoke edit tool when attempting to drag an arc track
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10208
2022-01-02 16:10:26 -05:00
57af990066
router: fix layer switch issue when starting a track on via without fixed segments
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9915
2021-12-16 00:55:17 +01:00
956ac871c3
PCB Editor: changes to track width overrides starting track width
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
2021-12-15 23:32:48 +00:00
97c2627de6
router: added missing case items (fixes regression in component dragging)
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10010
2021-12-15 23:18:55 +01:00
965ab42938
router: when dragging segments, don't snap to other segments on the same layer. Fixes drag flickering for short segments.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9720
2021-12-15 01:48:04 +01:00
2ae3a83b54
router: fix use-after-free crash in single trace shove routing when m_endItem's owning NODE is erased by the springback algorithm.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9994
2021-12-15 01:33:05 +01:00
b291d6c810
Fix success conditions in DP placer
...
The placer can sometimes generate segments that are not quite parallel.
Use a different tolerance for ApproxParallel to account for this.
Also set a minimum score for placement judging so that any placement
that doesn't violate DRC can be placed.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9948
2021-12-12 13:05:38 -05:00
6d0d4e0db9
Pcbnew, router tool: ensure switching layer by + or - works when starting routing.
...
Fixes #9936
https://gitlab.com/kicad/code/kicad/issues/9936
2021-12-11 09:54:03 +01:00
77fbb495f2
Highlight net during inline drag
...
Keep consistent UX between inline drag and drag started in the router
tool itself by highlighting the net being dragged
Fixes https://gitlab.com/kicad/code/kicad/issues/9919
2021-12-09 09:28:43 -08:00
95087c6de5
Fix clearance outlines for router head.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9885
2021-12-06 15:51:53 +00:00
5ba215c8ea
Use actual width when previewing PNS lines
2021-12-05 13:41:39 -05:00
7de9e48b57
PNS: Fix tuning calculations through locked segments
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9727
2021-12-05 13:35:28 -05:00
5cb2641142
Fix nullptr dereference in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9844
2021-12-02 13:20:44 +00:00
a596a1f2e2
ROUTER_TOOL needs to handle pads not handled by router itself.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9839
2021-12-01 22:25:02 +00:00
3c0b10b022
Don't use approximated shapes for router hulls.
...
We only do 45-degree routing anyway so we might as well build an
octagonal-based hull from the get-go.
Fixes https://gitlab.com/kicad/code/kicad/issues/7672
Fixes https://gitlab.com/kicad/code/kicad/issues/9544
Fixes https://gitlab.com/kicad/code/kicad/issues/9833
2021-12-01 19:44:30 +00:00
09ed60feb3
Don't make inferences about object type based on shape.
2021-12-01 19:44:30 +00:00
63560ecd7b
Remove RM_Smart state from router tool
...
It was never fully implemented and there was no way to switch into this
route mode.
2021-12-01 09:52:37 +00:00
a746d31038
PNS: Fix loop removal outside shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9680
2021-11-27 15:21:47 -05:00
8a0f8c329f
PNS: Fix DP gateway generation when pad distance < gap
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9306
2021-11-27 14:03:19 -05:00
4b226b8172
Unify our breakTracks routines
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9793
2021-11-27 06:34:47 -08:00
6652e5acf4
Draw pad holes when dragging.
...
Most of the time they're under the pad, but the provide needed
info when the hole is larger than the pad.
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:09 +00:00
9547c72e73
Teach router about different keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:04 +00:00
99ec2b1801
Don't hide original object when highlight is only part of it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9772
2021-11-25 23:42:13 +00:00
da458535c4
PNS: Avoid flickering clearances on new items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9773
2021-11-25 15:38:04 -05:00
63718323bc
PNS: Holes need to be moved with solids
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9773
2021-11-25 15:31:18 -05:00
b4342d813b
Fix SHAPE_LINE_CHAIN::Slice when end is an arc followed by a point
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9770
2021-11-25 10:05:33 -05:00
ade8fe4333
When dragging footprints pads with holes also need to be taken along.
...
Otherwise (aside from not colliding with their dragged location) we
won't update their locations and then if they happen to be the first
pad in the footprint we'll try to update the footprint's location post-
drag with the pad offset (which will be {0,0}.
This is easily reproducible with the test document in the bug in the
"fixes" statement.
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-11-25 14:54:12 +00:00
f9e1429c60
Naming conventions.
2021-11-25 14:54:12 +00:00
5985a21b74
Offset internal items by drag amount.
...
Some tools move only preview items while keeping the real items
hidden. Those tools must use this new offset parameter.
Other tools move the real items. Those tools can ignore this
parameter (which will default to {0,0}).
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-11-25 14:54:12 +00:00
ba6ae4fa9b
Kicad has many plugins. This one is for the pcb.
2021-11-25 12:56:46 +00:00
1c3e1df3ca
Not all holes are round.
...
We currently only need this to work for vias as we're a long way
from being able to support it for pads, so just check the hole
shape.
Fixes https://gitlab.com/kicad/code/kicad/issues/9735
2021-11-23 14:36:05 +00:00
e56e61ffb5
router: fix typo in the DP tuning fix patch
2021-11-23 00:21:38 +01:00
89228e1ebe
router: increase parallelity detection threshold for AssembleDiffPair()
...
Partially fixes the misrecognized diff pairs issue.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8567
2021-11-22 01:35:12 +01:00
e60386f028
router: disable 'limit corner count' optimization for via dragging
...
It seems to be completely preventing optimization instead of preventing over-optimization in case the head is a dragged via.
To be investigated in more details in V7.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8665
2021-11-22 00:05:17 +01:00
ccf9a72078
router: fix ghost dots issue in router preview items
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8665
2021-11-22 00:05:17 +01:00
bbafce6ab3
PNS: Don't clip the line in the middle of an arc - just start again
...
In shove mode, returning an empty line results in keeping the current
head, which should be okay for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
2021-11-21 19:53:03 +00:00
4e0ad07eb0
PNS::Shove Add margin when generating hulls for arc segments
...
Partially fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
There is still a case where if the shover does not find a solution,
we try clipping the arc and it still collides.
2021-11-21 17:13:21 +00:00
b1878fcc54
ClipVertexRange: fix fallout of NextShape API change
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9711
2021-11-21 11:03:22 -05:00
302c5ab537
Fix an issue created by commit 9e3362d1.
...
the issue was the graphic cursor was locked on the first snap point
in route mode, once a snap point is found.
2021-11-21 15:37:03 +01:00
c40e921cb3
router: remeber to make a shove lockpoint when placing a lone via
...
Note to self: works around a possible bug in CommitPlacement()/RewindToLastLockedNode()
fixes: https://gitlab.com/kicad/code/kicad/-/issues/9695
2021-11-21 00:18:20 +01:00
9e3362d14c
Snap mouse point before picking startItem.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9700
2021-11-20 13:44:16 +00:00
Tomasz Wlostowski
Jeff Young
Seth Hillbrand
Jon Evans
Mike Williams
jean-pierre charras
Ian McInerney
Roberto Fernandez Bautista