085485717c
Gerber place file: change DCode size of pads others than 1 or A1 to 0.1 mm
...
Previously it was a round shape 0.0 mm (allowed but not visible)
Gerber Format rev 2023-08 changed it to 0.1 mm (still a round shape)
2023-08-31 11:02:50 +02:00
f8dac43325
STEP export: add short segments as circles.
...
Because OCC can't connect two arcs together sometimes.
2023-08-29 23:58:25 +03:00
114ff054d3
STEP exporter: export track segments as thick segments with rounded end using arcs.
...
They are no longer exported as polygons.
Export time is slightly faster and file sizes slightly smaller.
Track arcs are still exported as polygons.
2023-08-27 19:37:41 +02:00
15f5a14217
Fix minor compil warnings
2023-08-27 11:11:08 +02:00
d193334a10
Add vrml export to cli
...
Roughcut as the vrml exporter needs some loving
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15472
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13952
2023-08-24 20:39:21 -04:00
f842e6ac7a
STEP: export arcs in board contours as curves, not polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13825
2023-08-24 21:53:53 +03:00
b8ce97b532
STEP export: fix circles.
2023-08-24 14:57:15 +03:00
83e9d87cde
STEP export: fix hole cutting counter message.
2023-08-24 14:26:27 +03:00
eb8c1d2a90
Fix compil issues (and probably a bug). Also display calculation time info.
2023-08-24 13:02:10 +02:00
cb54bdfa84
STEP export: add bounding box optimizations for cutting holes.
2023-08-24 05:42:56 +03:00
458d5fbeb8
STEP export: use unfractured polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15486
2023-08-24 03:47:55 +03:00
196fc67ece
Step exporter: generate oblong pad holes using 2 arcs + 2 segments.
...
Previously, the oblong shapes were polygons.
2023-08-23 18:16:25 +02:00
84fa4532b9
DIALOG_EXPORT_STEP: fix some issues:
...
- add missing inits (the zones were never created)
- fix a incorrect tool tip
- minor enhancements (add afew messages during export)
2023-08-21 09:36:25 +02:00
b52b05ebbb
Add zone export to step export
...
Mileage may vary on performance, decent enough for my board.
Warning, freecad chokes on boards with zones, but commerical tools are fine
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15234
2023-08-20 22:11:45 -04:00
50ac5db8d2
Add binary GLTF export option to kicad-cli
...
Not by any means finished
2023-08-19 16:47:42 -04:00
6c9ba52f18
Clean up naming.
2023-08-18 22:20:09 +01:00
460e609619
Remove unused variables.
2023-08-15 12:42:19 +01:00
812143ac69
ADDED: Run PCB DRC via cli
2023-08-10 20:20:40 -04:00
5e112ca78e
ADDED: parameterize font metrics and allow customization of overbar height.
2023-08-06 20:57:41 +01:00
c38ed7044a
ADDED: DNP flag for position file export
...
Adds ability to exclude footprints with DNP flag from position files in
dialog and cli
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15353
2023-08-04 11:02:54 -07:00
60806edac0
Gerber export X3: fix an incorrect keyword ("route" must be "rout")
2023-07-27 20:11:04 +02:00
a16ab0aae1
Replace SHAPE_T::RECT by SHAPE_T::RECTANGLE: RECT creates a collision name
...
issue with a Windows header on msys2.
Change very similar to the commit 9a47b344
2023-07-25 09:11:55 +02:00
3233bbe0ba
Make exported date time strings use ISO8601 format
...
Also rename the function to be explicit on its result format
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15185
2023-07-14 23:24:12 -04:00
493828cc6b
Eradicate a bunch of calls to dyn_cast.
...
Also deletes PAD::GetParent() which fails to look for parent footprint
through groups.
2023-06-25 11:10:07 +01:00
993bb84240
PCB_FIELD: bug fixes
2023-06-20 18:34:52 +00:00
137640ac28
Remove group association before plotting board outline in drill map
...
The plotter doesn't care about the grouping, and we expect the item to
have no group on deletion, so temporary items like this shouldn't be
part of one.
(Sentry issue KICAD-24Y)
2023-06-14 00:26:46 +01:00
9fe00bb808
Cleanup. No (intentional) functional changes.
2023-06-06 12:30:35 +01:00
5875f89531
Centralize text size clamping.
...
Also introduces alg::clamp to improve readability of
std::max( min, std::max( value, max ) )
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14876
2023-06-03 20:29:51 +01:00
9a47b34499
Replace PAD_SHAPE::RECT by PAD_SHAPE::RECTANGLE to avoid a collision NAME with a windows header on MSYS2, creating many compil warnings. No actual code change.
2023-06-02 12:18:24 +02:00
aacf8f50bf
Remove unneeded headers from pcbnew_scripting_helpers.h
2023-05-31 15:54:46 -07:00
48ecd742eb
Maintain file permissions when renaming
...
Temporary and autosave files do not neccessarily have the correct
permissions set to replace existing project files. This updates the
permissions to match the existing values where possible
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13574
2023-05-24 17:09:38 -07:00
66651327bd
STEP export: in board outlines, export Circles as Cylinders, round 2.
...
Other arcs (not 360 deg arcs) are still exported as polylines
2023-05-16 13:39:16 +02:00
99bdb82dff
Revert "STEP export: in board outlines, export Circles as Cylinders."
...
This reverts commit 09515fe821
2023-05-16 09:59:53 +02:00
09515fe821
STEP export: in board outlines, export Circles as Cylinders.
...
Other arcs (not 360 deg arcs) are still exported as polylines
2023-05-16 08:46:34 +02:00
7978941fa8
Don't allow thickness of 0 in case of an empty stackup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10790
2023-05-07 22:24:40 +01:00
b41d446f58
Fix a bunch more issues with sheetpaths and allowExtraText.
...
A sheetpath is required to correctly resolve text variables.
Depending on currentSheet is rife with bugs.
There are many places where we do *not* want to be prepending
field names to the field values, such as netlisting,
building PDF hypertext menus, etc.
Also, Find/Replace needs to work on unresolved text, as
that's what we're going to display (and if replace nuked
your variable references you wouldn't be happy).
2023-05-05 17:23:52 +01:00
dbed94e4b1
Fix gerbers and drill plot not logging errors
...
Partial fix for https://gitlab.com/kicad/code/kicad/-/issues/14437
2023-04-20 23:39:59 -04:00
c682d11fa0
Trim VRML export layers to board outline.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14557
2023-04-18 17:31:29 +01:00
51e55dd750
Convert sprintf to snprintf in most files
2023-04-17 15:39:34 +00:00
33b2b5b09d
STEP Export: Update options to reflect DNP and Unspecified filtering
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/14125
2023-04-13 10:33:03 -04:00
28028c941e
Retire Local/Draw coords distinction from PAD (the last object to have it).
2023-04-02 18:02:41 +01:00
bbd6c80507
Collapse FP_* down into their PCB_* equivalents.
2023-03-31 22:57:46 +01:00
28776f5745
Text attributes object improvements.
...
* Add compare method to COLOR4D object.
* Add unit test to validate COLOR4D comparison method.
* Add missing color test in text attribute comparison method.
* Add unit test for text attribute object.
* Remove unnecessary headers from text attribute header.
* Move text attribute code into separate source file.
2023-03-29 12:53:45 -04:00
65eb84265b
Fix a compil warning issue (mingw specific)
...
also avoid to include wx/wx.h in kicad_cli.cpp, it is compil time consuming.
2023-03-22 08:49:26 +01:00
0c26014eaa
step exporter: fix missing initialization of a member (m_pcbName)
...
in EXPORTER_STEP rename m_pcbName to m_pcbBaseName, to avoid using
the same name used also in STEP_PCB_MODEL.
2023-03-21 09:30:11 +01:00
edf6828cf1
Put the project name back into the step pcb label.
...
Software like Solidworks and other CAD treat STEP labels as unique entries.
When you import multi STEP files into the same project, it'll start deduplicating your design by those name.
So two completely unrelated PCBs with the same "PCB" name will result in one being replaced by another.
2023-03-20 21:11:28 -04:00
636e63f0c5
more about step exporter (export more copper graphic objects).
2023-03-06 16:36:37 +01:00
eeee3adb94
Step exporter: code cleaning and merge connected tracks in polygons
2023-03-06 11:59:09 +01:00
a3d834bef1
Step exporter: optimization: export round pad/via shapes as cylinders.
2023-03-05 14:54:16 +01:00
f569cffa8e
Step exporter fixes and enhancements:
...
- fix duplicate code and a few bugs (some are due to changes in code over the years)
- ADDED: option to export tracks and vias on external layers Exporting tracks is *very* time consuming,
and need a bit of optimization.
2023-03-05 12:55:15 +01:00
f24deac017
Consider oblong holes with x/y equal size as drills
...
An oblong hole with drillsizex = drillsizey is the same as a circular
drill hit and should be converted to such in outputs (both excellon and
DRC)
2023-03-03 00:42:44 +01:00
daf70f9b6a
Export footprint pad holes to STEP regardless
...
Footprint pad holes form a part of the board outline regardless of
whether the footprint is in the BOM or not
Fixes https://gitlab.com/kicad/code/kicad/issues/14013
2023-02-28 12:02:08 -08:00
7256a51e8e
Fixes in build board outlines as polygon and convert_shape_list_to_polygon:
...
- Ensure Bezier curves have their polygon build before use it.
- When building board outlines as polygon the same chaining epsilon value
for DRC, export step and 3D view (default 0.01mm).
Fixes #14115
https://gitlab.com/kicad/code/kicad/issues/14115
Fixes #14009
https://gitlab.com/kicad/code/kicad/issues/14009
2023-02-28 16:45:03 +01:00
4766175d60
EXPORTER_STEP: handle sub-layers in dielectric layer.
...
A dielectric layer (between 2 copper layers) can be made by more than one
layer (composite dielectric). Not frequent, but possible.
sub-layers where previously ignored.
2023-02-27 16:11:58 +01:00
51d46c0e73
plotters rework: add plot fct to use TEXT_ATTRIBUTES class to pass text settings
...
Old PLOTTER::Text is not (yet) removed, but it use negative text size
to mirrored text, which is not really compatible with some plotters (especially PDF).
Using TEXT_ATTRIBUTES is much easy and much better,
so PLOTTER::PlotText() is added.
Note: "old" PLOTTER::Text() is not removed yet.
2023-02-26 14:44:53 +01:00
e30e510354
gen drill map: fix duplicate suffix in map filenames if gbr drill fmt is selected
...
Fixes #14026
https://gitlab.com/kicad/code/kicad/issues/14026
2023-02-21 14:22:50 +01:00
aacc9746e3
Yeet the last of wxSize/wxPoint to stop leaking gdicmn everywhere
2023-02-18 22:57:18 -05:00
ce06171561
Convert additional sprintf to snprintf
2023-01-30 16:22:03 +00:00
e928d72c3b
Fix relative step file export
...
Forgot to set the project relative path, and the library search path
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13696
2023-01-29 22:19:37 -05:00
f90b04c715
Nullptr safety. (Sentry KICAD-5N)
2023-01-18 01:05:27 +00:00
c2e7524cb6
Surpress the giant opencascade stats print unless we are tracing
...
Also catch Warn level messages to set a flag and print the relevant there were warning message
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8613
2023-01-02 18:34:32 -05:00
593dc9e8b6
Some fixes in Gerber job file:
...
- Ensure colors use a normalized value (normalized name or RnnGnnBnn notation).
- Better code.
2022-12-06 17:01:37 +01:00
d7368588db
stackup manager: fix incorrect handling of colors for multi-layer dielectrics
...
The dialog allows a color selection for each dielectric layer.
However for a "dielectric" defined by more than one layer, the color was handled
only for the first layer, and not for the other sub-layers.
2022-12-01 16:19:13 +01:00
6dc1c9b0b7
Step exporter: filter very small segments when exporting them.
...
very small segments create issues in step export.
Add also more messages and more controls.
Fixes #13038
https://gitlab.com/kicad/code/kicad/issues/13038
Fixes #12905
2022-11-30 14:56:02 +01:00
f13ffa8276
Step export: fix incorrect export of a pcb with multiple main outlines.
...
The code was existing but did not work fine with more than one outline
Fixes #6684
https://gitlab.com/kicad/code/kicad/issues/6684
2022-11-15 16:37:00 +01:00
f51db4e093
Fix some Coverity and compil warnings.
2022-11-14 09:02:40 +01:00
50dcf258e6
Adjust the position file comment header
2022-11-13 18:43:49 -05:00
f4944f0db3
Quiet clang getting its knickers in a knot over case fallthroughs.
2022-11-13 23:01:48 +00:00
0a8db3bb88
Fix forgotten handling of origin offsets
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12889
2022-11-13 09:22:59 -05:00
9c5fbdb040
Fix compatibility with OCC version 7.4 and older
2022-11-13 08:18:10 +01:00
066a609b39
Cleanup warnings in the step exporter
2022-11-12 21:52:54 -05:00
3dd2ae762d
Refactor step export to use our normal board processing routines
2022-11-12 21:27:10 -05:00
d8e9436d92
Fix step export not resolving variables
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12754
2022-11-07 23:21:48 -05:00
cd30da179a
Round out the cli with position file export
2022-11-07 19:53:35 -05:00
dd94b2d3a7
Rename PROPERTIES to STRING_UTF8_MAP for clarity
...
This class has nothing to do with the properties system
2022-11-06 11:51:52 -05:00
bc45ae1b72
Move a dialog that was hiding in the filetree
2022-11-02 22:30:46 -04:00
0a134788d0
Implement cli for gerber, drill, pdf export of pcb
2022-10-29 11:56:10 -04:00
d6fca11419
Finish up work on PlaceFile settings persistence.
...
We were missing several flags, and using the Plot output directory
instead of saving our own.
Fixes https://gitlab.com/kicad/code/kicad/issues/12715
Fixes https://gitlab.com/kicad/code/kicad/issues/12714
2022-10-24 22:23:11 +01:00
fa2a36b74e
Add SMD and TH settings to config, and get rid of intermediate vars.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12715
2022-10-24 19:50:59 +01:00
a855c9a40c
Fix not handled exceptions.
2022-10-15 10:27:00 +02:00
3b63ce8a48
Don't use the 3d resolver config anymore
2022-10-08 14:27:10 -04:00
faae4f9eea
kicad2step: force immediate printing of messages (mingw issue: we need to flush the stdout buffer)
2022-10-08 16:43:14 +02:00
aaa1d166a7
Redirect step export output to a pretty window
2022-10-08 09:48:00 -04:00
b8dfbe02ad
Fix some issues in STEP exporter
2022-10-07 18:53:31 +02:00
fb8a4c10f7
Shove kicad2step into pcbnew itself with a new cli
2022-10-04 01:53:37 +00:00
cfa26fb706
Fix footprint relative path resolution for idf/vrml export
2022-09-25 23:40:25 -04:00
c50b4fb04f
Add relative to footprint 3d model path resolution
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2073
2022-09-25 22:56:16 -04:00
3d5913c825
Remove convert_to_biu.h, merge contents to base_units.h
2022-09-16 21:09:28 -04:00
66e8931405
Remove IU_PER_MM thats standalone
2022-09-16 21:09:27 -04:00
e6ed275c25
Repoint IU_PER_MILS
2022-09-16 21:09:26 -04:00
33f8161799
Merge in MM_PER_IU to EDA_IU_SCALE
2022-09-16 21:09:26 -04:00
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
93670d2b24
Improve support for .wrz files in vrml exporter, Fix error handling
2022-09-09 20:13:50 +00:00
c30a557810
ADDED netclass assignment from PCB canvas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5975
2022-09-03 19:29:59 +01:00
5679b9dbdc
Remove a few EDA_RECT instances.
2022-08-31 01:22:49 +01:00
122a6d7f46
Move hypertext linking to user-page-numbers.
...
Also moves most navigation code to SCH_NAVIGATION_TOOL.
Also changes page number href to anchor syntax ('#foo').
Also adds hypertext processing to SCH_TEXTBOXes.
Also adds combobox with schematic pages to text properties dialog.
2022-08-27 19:17:43 +01:00
bf964d8678
Commonize page_info by simply making the Iu scale a parameter on call.
2022-08-27 13:36:00 -04:00
aa2ad3b44c
Move KICAD_T[] to std::initializer_list<KICAD_T>.
2022-08-20 10:28:11 +01:00
a9536b5de9
CHANGED netclass assignments now done via canvas or via patterns.
2022-08-14 22:56:29 +01:00
f0efa9af9d
gen_footprints_placefile: re-add option to negate or not the X coordinate.
...
This option is for footprints on bottom side, and not for Gerber format.
This option was existing in 5.x version, but lost in 6.x version.
Fixes #4638
https://gitlab.com/kicad/code/kicad/issues/4638
2022-08-02 11:22:12 +02:00
jean-pierre charras
Alex Shvartzkop
Marek Roszko
Jeff Young
Seth Hillbrand
Mike Williams
Ian McInerney
Nimish Telang
Wayne Stambaugh
Chris Morgan
Jon Evans
Bobbe