Now the full library loading is not aborted (and the other libraries in list are also loaded).
Only the bad .fp file(s) is not loaded.
Mainly, a .fp file load error does not throw a library load error, and this is a temporary fix.
But throwing a library error when a .fp file cannot be loaded is worst (you even cannot import a good .fp file).
Make all EDA_TEXT data private and rename accessors to avoid function
name collisions in derived classes.
Overload EDA_TEXT's SetTextAngle() and SetEffects() in TEXTE_PCB.
Add support for preserving Reference text position, size, orientation
during a netlist import into a BOARD, as well as the one off footprint
update dialog.
Rename FPID to LIB_ID as is now used as a generic library identifier and
is no longer specific to footprints.
Remove all mention of footprint from the new LIB_ID doxygen comments and
code.
Rename files fpid.h and fpid.cpp to lib_id.h and lib_id.cpp.
Rename fp_lib_table.keywords file to lib_table.keywords and adjust CMake
build dependencies accordingly.
Update all source files effected by the code and file name changes.
Update .gitignore for file name changes.
Currently, kicad_pcb files have a (version ...) tag, but it is ignored. This
commit does the following:
1. Parse the version. If it's later than the last supported version, present an
alternative error message suggesting an upgrade if the file does not load
correctly. The version will be interpreted as an integer YYYYMMDD to suggest
a KiCad release date.
2. Accept a (version ...) tag also in kicad_mod files, but do not write them
yet. If no version tag is present in these files, assume the version to be that
of the current format version at the time of this commit.
This is meant to be merged to the 4.x stable series, and preps for KiCad 5
which will start emitting version tags also in footprints - users with what
will then be 'old stable' will not get a parse error when we introduce this for
footprints, and we can safely increment the format version later.
2. Whole bunch of pointless casts removed
3. Unused variables removed
4. Fix bug caused by JP on April 25, 2015 where strings were adjusted for translation and the hotkeys section table accidentally swapped the footprint editor title with tag, resulting in "footprint editor" being exported instead of "[footprinteditor]"
No functional changes besides #4, technically it'll "break" imports hotkeys files but April 25 broke imports as well.
* Recognize values with units in more recent gEDA footprint files and scale accordingly.
* Join both parseInt() implementations. This should reduce rounding errors as well as
code duplication.
PAD_SHAPE_T and PAD_ATTR_T still have a double definition (new names and old names) to be sure python scripts are nor broken by the change.
PAD_DRILL_SHAPE_T does not have a double definition, because it is unlikely oblong holes are used in python scripts.
Double definitions will be removed in the (next) future.
* Fixed incorrect parameter ordering in gEDA footprint library parser
which read drill diameter, pad clearance and solder mask clearance.
* Fix FindOpenSSL.cmake version detect bug which was exposed by OpenSSL
version 1.0.2.
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
The old Cu stack required knowing the count of Cu layers to make
sense of the layer number when converting to many exported file types.
The new Cu stack is more commonly used, although ours still gives
B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
You will need to convert to the format immediately, *.kicad_pcb and
*.kicad_mod (=pretty) since legacy format was never going to know
about 32 Cu layers and additional technical layers and the reversed Cu
stack.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
* Make GPCB_PLUGIN::EnumerateFootprints() read the directory contents
instead of loading the entire cache.
* Make KICAD_PLUGIN::EnumerateFootprints() read the directory contents
instead of loading the entire cache.
* Prevent cache from being reloaded on every footprint file read.
* Fix a bug forming wxFileName in GPCB_FP_CACHE::Load().
* Fix invalid file name time stamp debug assertion.
* Use FPID to set loaded footprint name.
* Remove file name <> from exception strings per UIPolicy.
- Removed spurious int casts (these are truncated anyway and will break
doubles)
- Applied the Distance, GetLineLength, EuclideanNorm, DEG2RAD, RAD2DEG
ArcTangente and NORMALIZE* functions where possible
- ArcTangente now returns double and handles the 0,0 case like atan2, so
it's no longer necessary to check for it before calling
- Small functions in trigo moved as inline
Pcbnew, layer manager: add option (popup menu) to always keep copper layers not visible but the active layer, even when the active layer is changed.
Usefull for multilayer ( more than 4 layers) PCBs.
* Complete encapsulation of the MODULE class.
* Complete encapsulation of the EDA_TEXT class.
* Encapsulate most of the ZONE_CONTAINER class.
* Add pcbcommon library as a dependency for reSWIGging the scripting
support. This should cover most dependency cases.
* Encapsulate most of the MODULE class.
* Start encapsulating the DIMENSION class.
* Lay some groundwork for EDA_TEXT encapsulation.
* Move cleverly hidden MODULE functions into class_module.cpp.
* Use std::swap to exchange TEXTE_PCB values for undo/redo.
* Remove unused members from MODULE class.
* The usual coding policy and documentation fixes.
* Create new GEDA PCB plug in.
* Add support for opening GEDA PCB footprints with module editor.
* Make import footprint file dialog remember last selected footprint
type during current session.
* Update module editor file import to use new GEDA PCB plug in.
* Let IO_MGR know about GEDA PCB plug in.
* Create a WHITESPACE_FILTER_READER to simplify parsing GEDA PCB footprint
files.
jean-pierre charras
Dick Hollenbeck
Wayne Stambaugh
Chris Pavlina
Simon Wells
unknown
unknown
Wayne Stambaugh
Maciej Suminski
Povilas Kanapickas
Lorenzo Marcantonio
Andrey Fedorushkov