The connection graph should only be updated within the commit structure
because this is the only time the connectivity should be changed. We
want any connectivity changes to be included in the commit as well, so
this should be stored prior to the undo/redo list mods
Use COMPARE_FLAGS::EQUALITY and COMPARE_FLAGS::ERC when doing
library diffs.
Also fixes a few more cases where we weren't checking for -1 when
doing a fieldID < MANDATORY_FIELDS.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14830
SCH_CONNECTION objects are temporary and can become stale any time the
connectivity is updated. Keeping them around to reference later is a
bad idea. Even if the object pointer is still valid in an SCH_ITEM in
the undo/redo buffers, comparing the pointer against another pointer as
a test to see if they are the same connection is not valid. Saving the
connection name is safe and ensures the connection is the same even if
the pointers differ.
- Ensure the first field in m_fields has id = 0 to be seen has hypertext
(it was not the case after reading a .kicad_sch file)
- when converting this item to another label/text, remove this special Field
from the copied field list to the converted label.
SCH_EDIT_FRAME::RecalculateConnections() calls SchematicCleanup and then
resets the connectivity graph and recalculates it. OnModify() also
calls RecalculateConnections(). For long calculation schematics, this
can impact usability
1) Copy label fields when converting.
2) Don't assume netclass directive should be net name -- this is very
unlikely.
3) Don't show font controls in Netclass Directive Properties dialog --
there's no basic text associated witha Directive Label.
We're getting segfaults in places where this isn't checked. Also, add
some asserts so we can catch bad tool push/pop.
Removes all uses of GetCommandStr() and makes it private.
dropping files to Kicad manager :
*.kicad_pro, *.pro -> open project;
gerber and job files -> open in Gerbview editor;
Eagle and Cadstar files -> open project.
dropping file to schematic editor -> append schematic;
dropping library file to Symbol editor -> add library;
dropping board file to PCB editor -> append board;
dropping library or footprint file to Footprint editor -> add library or import footprint;
dropping ZIP file or gerber files to Gerbview editor -> open files;
dropping sheet file to Drawing Sheet editor -> open sheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11638
Converts dialog_image_editor to panel_image_editor. Embeds this panel in
a new properties dialog for the schematic and PCB editors that allows
editing position, layer, locked status, etc. like other items.
When the user asks to mirror a symbol is is frequently to get the
reference/value on the other side of the symbol for placement purposes.
Autoplacing the fields here keeps the text where they were initially
which can be frustating to work around.
This commit treats the mirror command as a user request to change where
the fields are
Fixes:
* Various special cases around junctions on pins and dragging.
* Some rotations of endpoints resulting in a 45 degree rotate.
* Some cases where it was possible to get a line with neither
endpoint selected, and also substractive unselecting only one of two
selected endpoints unselecting both.
* Use line midpoint for sorting. Start and endpoints aren't
consistent in the order they appear on the X or Y axis. So,
we need to use the midpoint for our position for consistent
sorting when dragging groups of parallel lines where some
have the start and end reversed.
Other:
* Rename TEMP_SELECTED TO SELECTED_BY_DRAG. This is the actual meaning
of the flag, and should reduce confusion as
to when it should be used.
* Move usage of TEMP_SELECTED as an algorithmic mark to CANDIDATE
instead.
* Fix mistaken clearing of START_POINT and ENDPOINT.
* Move endpoint setting and clearing out of narrowSelection, and into
selectPoint and selectMultiple.
* Don't show dangling end warnings on new lines
The fix for https://gitlab.com/kicad/code/kicad/issues/10529 kicked the
subsequent IDs for unit selection off the maximum ID value for popup
menus. This increases the maximum popup number (integers are free)
(cherry picked from commit 79b6991d7b)
Center rotation will often misalign lines to the grid, which is bad
until fix off grid items on the schematic.
We can rotate a connection end into a new connection or to become
collinear with an existing line, so we need to check for this at the end
of rotation.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10565
(cherry picked from commit 7d4cb91f39)
If a wire intersects more than 2 pins from the same symbol, we don't
trim connections. If the wire intersects exactly two pins from a single
symbol, we remove the wire between the pins.
We avoided doing this before because we didn't have a good metric for
trimming vs. not. But the per-symbol calculation feels like the least
surprising option.
Fixes https://gitlab.com/kicad/code/kicad/issues/10909
Fixes https://gitlab.com/kicad/code/kicad/issues/1857
(cherry picked from commit 75a4036e45)
We need the item to be currently selected when repeating the last symbol
insert. This ensures we have a valid selection before starting the move
tool and possibly getting odd system behavior from mouse positions
Fixes https://gitlab.com/kicad/code/kicad/issues/10619
(cherry picked from commit 7642a9db79)
Also fixes some plot bugs with arcs.
Also moves polygonization of arcs (when required) in plotting code
from 5 degrees to calculated based on ARC_HIGH_DEF.
Fixes https://gitlab.com/kicad/code/kicad/issues/5017
ADDED arc, circle and rectangle shapes for schematic. Shapes support
line styles and fill colors.
CHANGED sheet background color in Edit Text & Graphics Properties to
fill color (and it now affects shapes).
Pushed STROKE_PARAMS down into common and moved all shapes to using it
for stroke descriptions.
And undo the previous changes in SCH_TEXT::Rotate().
We continue hitting this with a wrench until it gets fixed or becomes
broken beyond any recognition.
Remove duplicate instance data saved in both root SCH_SCREEN and SCH_SHEET
objects that was causing them to be out of sync. All sheet instance data
is stored in the SCH_SHEET object itself and rebuilt on the fly so it is
always current.
Remove Get/SetPageNumber from SCH_SHEET_PATH object so it doesn't obfuscate
where the actual sheet page number information exists.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9782
Calling UpdateItem() may be performed by in a common loop, e.g. for(
SCH_ITEM* item : GetScreen()->Items() ) or similar. We cannot call
GetScreen()->Update( SCH_ITEM* ) in this routine as it will remove and
re-add the item to the RTree, invalidating iterators. If needed, the
items need to be cached to an external container before updating
Fixes https://gitlab.com/kicad/code/kicad/issues/9318
Keeps the lines connected but doesn't solve the crossed-wire mixups.
This allows common usage (mirroring labels/rotating segments) and leaves
prevention of the crossed wires to the user.
We can't really prevent crossed wires when rotating e.g. a part with
wires connected to 4 sides and users will not expect that. But we
should not disable useful features like mirroring multiple parallel
items to avoid a known impossible situation
Also provides an alternative solution to 345f506f0c that allows us to
rotate groups without destroying connections on hover
Fixes https://gitlab.com/kicad/code/kicad/issues/8403
Fixes https://gitlab.com/kicad/code/kicad/issues/8523
We have a fixed bottom-align for the text and labels in eeschema.
Therefore, mirroring vertically needs to account for the text's offset
from the bounding box center.
Fixes https://gitlab.com/kicad/code/kicad/issues/9208
Seth Hillbrand
Jeff Young
Wayne Stambaugh
Mike Williams
jean-pierre charras
Marek Roszko
lulu731
Miklós Márton
Mikolaj Wielgus
dsa-t