4565631728
Finish moving eeschema assigned netclasses to sheet-path-relative.
...
Also adds code for the case where a new label is created on a net
with an existing netclass assignment.
Fixes https://gitlab.com/kicad/code/kicad/issues/5886
2020-10-07 16:31:55 +01:00
cfc636d25f
Minor adjustments to DRC syntax help.
2020-10-07 16:31:55 +01:00
eb8287ded8
router: bring back legacy GetEffectivePolygon() for complex pad shapes (more info in comments)
2020-10-07 16:36:37 +02:00
8a7fc7e970
drc: more robust segment pair detection, still issues with approximated arc corners though...
2020-10-07 16:36:37 +02:00
719363fa4a
Factor out class MINOPTMAX<> into a separate header
2020-10-07 16:36:37 +02:00
c3da54b741
Allow editing properties of locked pads
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5861
2020-10-06 17:54:50 -04:00
42496a7d62
Convert DRC rules syntax help to markdown
...
Note, the original markdown spec specifies using 4 spaces to indent a
code block (https://daringfireball.net/projects/markdown/syntax )
Wrapping with three backticks doesn't work with this lib. Wrapping
with a single backtick for span elements works ok.
2020-10-06 17:18:35 +00:00
7c46cb0a05
Make GetCenter() return the boundingbox center by default.
...
Leaves pads and markers returning the position.
Fixes https://gitlab.com/kicad/code/kicad/issues/1924
2020-10-06 18:00:18 +01:00
f620f8bdd3
Report silk/edge collisions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5854
2020-10-06 13:20:52 +01:00
ee95d8fe2e
Improve SNR in status bar (and use common code).
2020-10-06 12:08:31 +01:00
305fe54971
Drawing tool needs to pass resetLocalCoords event after recording it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5879
2020-10-06 12:08:31 +01:00
00baaaa831
Add substrateMaterial FR408-HR
...
https://docs.oshpark.com/resources/four-layer-substrate-FR408HR.pdf
2020-10-06 10:31:00 +00:00
728c207105
Deduplicate settings migration handling
2020-10-05 23:21:57 -04:00
d23d5510e7
Restore a side-effect that the router appears to depend on.
2020-10-06 00:07:34 +01:00
35fa857fd8
Make sure router tool passes events it doesn't handle.
...
Fixes undo/redo when router tool is active but not routing.
2020-10-05 23:16:37 +01:00
18a3c4c1db
Fix some fairly catastrophic bugs in shape collision optimization.
...
I did a little too much copy & paste last time around....
2020-10-05 22:32:07 +01:00
6d50c9749c
Mark the colliding shape so we know which one to highlight.
...
Also checks the nets when checking for a pad being flashed on a particular
layer (so we don't end up thinking the currently-routing-collided track
is a connection).
2020-10-05 22:32:07 +01:00
8f870e87d6
Flip default for KeepTopBottom in parser.
...
File only has a token if it's set to true.
2020-10-05 22:32:07 +01:00
bb5d393917
Respect "keep top/bottom" setting when checking pad layer.
2020-10-05 22:32:07 +01:00
d063c56971
Move PNS pad solids to COMPOUND_SHAPE.
...
Also fixes plated holes solids to include plating thickness.
2020-10-05 22:32:07 +01:00
0751965b2b
Be more responsive to user cancel.
2020-10-05 22:31:52 +01:00
43c14face0
Switch to showing metric/imperial units in comboboxes and menus
...
This will always show 1 unit from each system, with the primary unit
being the current frame unit and the secondary unit being the
most recent unit used from the other system. These are saved in
the settings, so they are saved between runs.
2020-10-05 20:26:33 +01:00
27f3ac980f
Fix broken Python builds.
2020-10-05 10:52:51 -04:00
1416280662
Cleanup: Move Eagle files into plugins folder
2020-10-05 14:19:07 +00:00
5705859e9e
Remove accidental debug code.
2020-10-05 12:27:21 +01:00
37906511f5
Class renaming.
...
DRAWSEGMENT -> PCB_SHAPE
EDGE_MODULE -> FP_SHAPE
TEXTE_PCB -> PCB_TEXT
TEXTE_MODULE -> FP_TEXT
2020-10-05 11:55:33 +01:00
a28a0e14ba
Fix conversion warnings
2020-10-05 10:41:14 +00:00
49f0d80f14
gen_footprints_placefile: fix unit selection not stored in config.
...
Fixes #5884
https://gitlab.com/kicad/code/kicad/issues/5884
2020-10-05 10:50:40 +02:00
0eaf7bfd1f
Ensure visible layers are synchronized properly
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5873
2020-10-04 16:55:22 -04:00
8b0fb9f4cf
Remove units and polar settings from the preferences panels
...
These options are already available in menus, toolbars and hotkeys,
so having them in the preferences pane is more trouble than it is
worth.
2020-10-04 17:53:55 +01:00
3a570c27f0
Update unit handling in the preview ruler
...
* Make the ruler able to switch to mils after creation
* Cleanup an unused flag in Pcbnew dimensions
* Move unit changed notification into EDA_DRAW_FRAME so more
frames to use it.
* Allow switching units when GerbView ruler tool is active
2020-10-04 17:53:55 +01:00
5828416960
Simplify area printing in the board statistics dialog
...
Store the board area in IU, and then convert it to the user
units on display using the common unit printing functions.
2020-10-04 17:53:55 +01:00
122bd7ca7c
Make the statubar aware of mils units
...
Switch Eeschema to use the built-in printing routines
because its precisions are close to those and it is
cleaner.
Give mils a precision of 2 decimal places to match
the precision shown in inches.
2020-10-04 17:53:55 +01:00
ad29a2f3b4
Update more places to properly display mils
2020-10-04 17:53:55 +01:00
b1bd1f2a97
Introduce new action to switch to mils as a unit
2020-10-04 17:53:55 +01:00
7a4900b8dc
PCB_LINE_T -> PCB_SHAPE_T and PCB_MODULE_EDGE_T -> PCB_FP_SHAPE_T
...
Also updated footprint text and zone types for consistencey.
2020-10-04 16:49:04 +01:00
8e515d0069
Standardize default hotkey refresh
2020-10-04 05:48:26 -07:00
85c6cebd77
Rework silk-to-pad checker to handle all solder mask clipping of silk.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5851
2020-10-04 13:21:01 +01:00
36ceb8075e
Fix logic bug in DRC RTree handler.
...
Return value from visitor is whether or not to keep searching, not
whether or not there was a collision.
2020-10-04 13:21:01 +01:00
4702e279b9
A DRAWSEGMENT can be stroked *and* filled.
...
Make sure its effective shape reflects that. Note also that the
strokes need to have the correct width.
2020-10-04 13:21:01 +01:00
ba8b8d2738
Fix incorrect vertical position of some ckeckboxes in some wxGrid used in dialogs
2020-10-04 10:34:31 +02:00
9e115a548e
Add advance config variable to skip bounding box loading on footprints
2020-10-03 22:01:42 +00:00
bb753aaadf
Clean up terminology around active & high contrast layers.
2020-10-03 22:55:34 +01:00
44580acee2
Clean up some compiler warnings.
2020-10-03 22:55:34 +01:00
d14761bee6
Fix inches being sometimes used instead of mils
2020-10-03 20:06:56 +00:00
400c15b8eb
Add mils to units, remove useMils variables
2020-10-03 20:06:56 +00:00
b69d396afc
Turn the toolbar context menus into unique_ptr for easier management
2020-10-03 19:09:18 +01:00
81154c9270
Back out check-for-mouse-in-selection-bbox for PCBNew.
...
Unlike eeschema, PCBNew has had a selection model for two major
releases so folks have gotten used to RMB acting on the selection
rather than what's under the mouse.
Plus it makes RMB after a drag-select nearly useless as your mouse
by definition ends up outside the selection bbox.
Fixes https://gitlab.com/kicad/code/kicad/issues/5857
2020-10-03 18:50:49 +01:00
3144bab36f
final cleanup about removing useless include
2020-10-03 16:40:36 +02:00
0b23cb7dbb
more cleanup about removing useless include
2020-10-03 15:26:03 +02:00
Jeff Young
Tomasz Wlostowski
Jon Evans
Michael Kavanagh
Benjamin Vernoux
Ian McInerney
Wayne Stambaugh
Mark Roszko
jean-pierre charras
Seth Hillbrand
Mikolaj Wielgus