The bump direction should only be concerned with physical points to
calculate the heuristic for loop-back otherwise we get too many false
positives.
Fixes https://gitlab.com/kicad/code/kicad/issues/3971
Needs to handle changes to PNS_ROUTER. This does not implement
springback or backspace in DIFF_PAIR_PLACER, only allows committing
lines as before
Fixes https://gitlab.com/kicad/code/kicad/issues/3988
When editing pcb items, the creation of a new net to connect existing
pads or traces can be a useful shortcut. This inserts the ability to
optionally create a new net from the Net Selector dropdown menu.
The canvas size is not guaranteed to be strictly > 0, so we need to
enforce a minimum returned size before dividing by it or passing to GAL
initialization
Replace SEVERITY_ERROR by RPT_SEVERITY_ERROR to avoid collision with a system definition.
Replace other SEVERITY_XXX by RPT_SEVERITY_XX for consistency.
Fix compil warnings and some other compil issues.
CHANGED: The reset buttons now set the X or Y offset to the current
offset from the reference position. Selecting individual pads as the reference item is now also possible.
Not all footprint pad items are connected to elements in the PNS, so if
we don't find the parent element, we avoid later crashes/assertions by
skipping their addition
Fixes#3972 | https://gitlab.com/kicad/code/kicad/issues/3972
Config values were not stored into the right variables.
Make also an option persistent during the session
in DIALOG_UPDATE_PCB and DIALOG_NETLIST
DIALOG_UPDATE_PCB and DIALOG_NETLIST match options: use same order in dialogs.
In rare cases (one known case) sizes of areas used as container when spreading
footprints can become negative, thus hanging pcbnew.
Happens if many footprints are very big (say 80cm).
Now if there is no room to place footprints, some are stacked.
In the case where the footprint arc has a non-normal angle, we cannot
represent this in pcbnew and it corrupts the gerber output. Therefore
we drop the invalid arc and continue to load the footprint/board.
Fixes#3918 | https://gitlab.com/kicad/code/kicad/issues/3918
KiCad is limited to 32 signal layers but PCad can number the layers
higher than this. Instead of a C-style array, we now hold the layer
numbers in a std::map to support arbitrary numbering.
Fixes#3949 | https://gitlab.com/kicad/code/kicad/issues/3949
Commit d7272b7f5e fixed the use of
the eagle DRC to change the library pad shapes. This was also
applied incorrectly to SMD stacks.
Remove the references to m_rules in packageSMD() and the code
that deals with them. eagle 7.7 does not have any SMD pad options
other than rectangle with rounding.
When drawing to a scaled DC, the window doesn't reflect the expected
size if scaled after. This causes elements drawn on the edge to reflect
back into the drawing area instead of being cut off.
We can simply scale our own values to avoid this issue.
Fixes#3849 | https://gitlab.com/kicad/code/kicad/issues/3849
Keeping a pointer to the actual file history inside a special
file history menu led to many cases of use after free crashes,
so instead rework the actual file history to add the menu
items.
Fixes https://gitlab.com/kicad/code/kicad/issues/3741
This is due to the fact the PNS_TUNE_STATUS_POPUP was not hidden
before calling its destructor.
It is now fixed by setting its virtual destructor calling Hide().
TODO: see if it could be used for any class derived from STATUS_POPUP.
(We already have this issue in other places)
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
to calculate thermal clearance (antipad size) for pads having the same netcode
as the zone, the net clearance has no meaning
(net clearance between object of the same net is 0)
and the zone_clearance can be set to 0 (i.e. use the netclass clearance).
Therefore use the antipad clearance (thermal clearance) or the zone_clearance if bigger.
Using a UTF8 char inside a C string can work on unix, but not on Windows.
It must be explicitly converted in a unicode value inside a wide string
(like a wxString)
When adding a .pretty library, if the actual .pretty folder were
selected then no folder would be added to the list of libraries.
This led to an assert when normalizing paths, and the library
not being added.
This variable is empty, so the argument evaluated to "-I", and the next
argument was then interpreted as a path (and thus ignored). This hides a
preprocessor definition (-D) from Swig.
Now that the tool framework gracefully shutdowns the tools, graphics
can be created on the stack inside a tool function.
This reverts commit f6881ce3de.
Increase the coverage ratio a bit so that footprints that still
have 10% of their area available for selection won't bring up the
disambiguation menu.
Fixes https://gitlab.com/kicad/code/kicad/issues/3721
The preferred list isn't actually in use anymore at this point, so
it currently has no effect other than to mess things up since we
aren't keeping track of which modules have been rejected when we
check the module count.
Fixes https://gitlab.com/kicad/code/kicad/issues/3721
Sometimes a dxf curve is a "degenerated" bezier curve having only 3 points.
(a control point is at same location as a end point)
This commit fix incorrect import of these curves.
An instance of STATUS_TEXT_POPUP was created on the stack.
But it crashes pcbnew when closing the current main frame,
perhaps due to stack switching in coroutines.
It is now created on the heap.
ADDED: Back annotation algorithm,
eeschema back annotation dialog
CHANGED: added some minor helper methods to SCH_REFERENCE_LIST and SCH_REFERENCE,
split SCH_REFERENCE_LIST::CheckAnnotation on 2 parts to reuse code
- Fix non optimal shape of solid polygons after inflate transform.
- Add a small extra clearance ((2 microns) when creating clearance areas
(especially, convert arc to polygons create small differences)
- Add a small threshold (1 micron) in drc test distances to avoid false positives
- fix a minor issue in TransformOvalToPolygon that created sometimes a not perfect shape
Fixes#3812https://gitlab.com/kicad/code/kicad/issues/3812
The new line collision search uses BBox() to check for colliding
objects. BBox in the SHAPE_LINE_CHAIN did not include width as the
chains were assumed to be zero-width. This is not the case for
PNS::LINE elements.
We mostly don't notice this because DRC checks for SEGMENT collisions
but it becomes obvious/annoying when we cannot place a track for unknown
reasons and the snap-back doesn't take line width into account.
Fixes#3776 | https://gitlab.com/kicad/code/kicad/issues/3776
When routing where we hit multiple obstacles, we choose the shortest
path to allow overlapping hits to choose the shorter path, thus giving a
better chance of returning true for the DRC-compliant path.
Fixes#3773 | https://gitlab.com/kicad/code/kicad/issues/3773
Remove the CACHE_WRAPPER whose sole purpose was to allow the
cache to be stored in the project, and instead just have the cache
inherit the proper class.
Seth Hillbrand
Jeff Young
jean-pierre charras
Michael Kavanagh
Andrew Downing
Jon Evans
Simon Richter
Tomasz Wlostowski
Ian McInerney
Hufo
Ben Dooks
Alexander Shuklin
Mark Roszko
qu1ck
brian piccioni