a4d417f5c0
Get rid of "drill" terminology when talking about finish hole size.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7044
2021-01-11 13:49:43 +00:00
e09271ca0e
Fixes for hole clearance and hole-to-hole tests.
...
1) Separate out CONSTRAINT types
2) Filter both source and dest pads/vias for drilled holes when doing
hole-to-hole checks. We were checking the items being put into the
DRC RTree, but not the items we were scanning.
3) Add hole clearance to Board Setup Constraints panel.
Fixes https://gitlab.com/kicad/code/kicad/issues/6546
Fixes https://gitlab.com/kicad/code/kicad/issues/4683
2020-11-29 23:35:23 +00:00
32dffd27ab
Add silk clearance to board setup constraints.
2020-10-12 18:31:00 +01:00
6dae769944
Progress reporting for connectivity tests.
...
Also makes via annulus terminology more consistent.
2020-09-23 16:28:00 +01:00
f340636f70
When knocking out higher-priority zone use fill, not outline.
...
Also fixes a bunch of naming issues, primarily with lowercase for
protected variables, but also some for consistency with other parts
of the code.
Also changes the zone fill radio buttons in Board Setup to be more
generic referring to legacy vs. current, and to have tooltips.
Fixes https://gitlab.com/kicad/code/kicad/issues/5583
2020-09-18 16:45:41 +01:00
305abb210f
Add a mode to allow zone smoothing to produce external fillets.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5306
2020-08-30 15:20:59 +01:00
e0351b4e4c
Zone filler: make new algo (no thickness for filled outlines) the default
...
Add also a message info to the pcbnew constraints panel for arc to segment
approx min error value.
2020-08-13 10:01:23 +02:00
ab07c852d0
Board setup: replace checkboxes with radio buttons
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4520
2020-05-24 00:25:28 +00:00
74ee143d45
Add via annulus minimum.
2020-05-11 22:56:09 +01:00
e0da677d4d
Add min clearance to DRC; rename Min Via Drill to Min Through Hole.
...
Also fixes a crash bug when ignoring a DRC violoation with multiple
markers.
Fixes https://gitlab.com/kicad/code/kicad/issues/2528
2020-05-04 22:08:36 +01:00
e39d145d72
Add DRC tests for minimum drill size (based on min via size).
2020-05-04 22:08:36 +01:00
b7cccf6844
Work around some wxWidgets bugs on OSX.
...
Set the netclass grid a bit narrower so it doesn't end up with a scroll
bar.
Load the constraints bitmaps on show so they get drawn (otherwise all
but those in the first sizer are blank).
2020-05-04 22:08:36 +01:00
3759799d1e
Pcbnew, PANEL_SETUP_FEATURE_CONSTRAINTS: cosmetic enhancements: add a few icons.
...
Fixes #4263
https://gitlab.com/kicad/code/kicad/issues/4263
2020-04-25 15:22:20 +02:00
85c2e0d23a
Add user-defined severities, exclusions and colors to DRC markers.
...
Exclusions are currently persisted in the project file.
Fixes https://gitlab.com/kicad/code/kicad/issues/1989
2020-03-04 00:39:28 +00:00
bfe2fbf991
Fix uninitialized variables.
...
especially BOARD_DESIGN_SETTINGS::m_HoleToHoleMin was not initialized, but used in pcbnew when creating a new board
2019-10-25 09:15:19 +02:00
a3855cb4f2
Allow thermal spokes to be same width as minimum width.
...
Also some changes for readability and clarity, both in the code
and in the Feature Constraints panel.
Fixes: lp:1835674
* https://bugs.launchpad.net/kicad/+bug/1835674
2019-07-14 10:36:48 +01:00
a076f5092c
I18n: fix a few useless leading spaces in messages.
2019-06-16 20:29:11 +02:00
18ffb405b4
better message in dialog
2019-06-16 09:13:17 +02:00
34ccd0f004
Pcbnew: prepare the new zone filling algo (filled polygons with no thickness). Work in progress.
2019-06-04 09:39:17 +02:00
6bcf1839b7
pcbnew: Add arc approximation setting to board
...
This places the arc approximation setting in the kicad_pcb file and uses
it for all parts of the board rendering where arcs are converted to
segments. This allows the user to customize their speed vs. accuracy
tradeoff. The default setting of maximum error of 0.005mm is acceptable
for small boards on moderate systems.
2019-05-24 21:21:06 -07:00
1ae47b6069
Implement a copper-to-edge-clearance setting.
...
For legacy boards, the setting is picked up from the board outline
thickness. If the board outline has mixed thicknesses, then the
max is used and a warning is displayed.
Fixes: lp:1797787
* https://bugs.launchpad.net/kicad/+bug/1797787
2019-04-05 22:18:44 +01:00
882565f2e1
Fix a few wxWidgets minor asserts
2018-07-29 10:39:05 +02:00
e6b55c9ae5
New net membership controls for more efficient operation.
...
(cherry picked from commit f7c5a54)
2018-07-17 15:14:28 +01:00
977f27f3c4
Adjust spacing on preference panels.
...
Giving them the correct parent changed the spacing.
(cherry picked from commit 7f602f3)
(cherry picked from commit 718db46)
2018-07-17 15:14:25 +01:00
aab97c8385
Consolidate design rules UI.
...
Implement new Board Setup paged dialog which includes:
Layers Setup
Design Rules
Solder Mask & Paste
Text & Drawings
Moves line width and text properties to a layer-class-based
system. Renames unlocked to upright (which also reverses the
logic).
New Edit Text and Graphic Properties dialog which replaces
Edit Footprint Text and adds layer-class-based editing and the
italic, upright and visibility properties.
Adds Import Settings functionality which allows settings to
be imported from another project at page granularity.
Also UNIT_BINDERizes the dialog and adds editing of pcb text.
Fixes: lp:1731952
* https://bugs.launchpad.net/kicad/+bug/1731952
Fixes: lp:1743464
* https://bugs.launchpad.net/kicad/+bug/1743464
Fixes: lp:1664761
* https://bugs.launchpad.net/kicad/+bug/1664761
Fixes: lp:1753362
* https://bugs.launchpad.net/kicad/+bug/1753362
Fixes: lp:1545427
* https://bugs.launchpad.net/kicad/+bug/1545427
Fixes: lp:1753775
* https://bugs.launchpad.net/kicad/+bug/1753775
Fixes: lp:1777692
* https://bugs.launchpad.net/kicad/+bug/1777692
Fixes: lp:1780670
* https://bugs.launchpad.net/kicad/+bug/1780670
Fixes: lp:1519601
* https://bugs.launchpad.net/kicad/+bug/1519601
(cherry picked from commit 3944a5e)
2018-07-17 15:12:34 +01:00
Jeff Young
jean-pierre charras
Michael Kavanagh
Seth Hillbrand