3c0b10b022
Don't use approximated shapes for router hulls.
...
We only do 45-degree routing anyway so we might as well build an
octagonal-based hull from the get-go.
Fixes https://gitlab.com/kicad/code/kicad/issues/7672
Fixes https://gitlab.com/kicad/code/kicad/issues/9544
Fixes https://gitlab.com/kicad/code/kicad/issues/9833
2021-12-01 19:44:30 +00:00
09ed60feb3
Don't make inferences about object type based on shape.
2021-12-01 19:44:30 +00:00
58189dca7a
Always focus on center of small things.
2021-12-01 19:44:30 +00:00
63560ecd7b
Remove RM_Smart state from router tool
...
It was never fully implemented and there was no way to switch into this
route mode.
2021-12-01 09:52:37 +00:00
c4a6a61743
Don't truncate values on import
...
Leads to off-by-one errors when converting to internal values
Fixes https://gitlab.com/kicad/code/kicad/issues/9827
2021-11-30 16:10:56 -08:00
515aed7408
Make Clone functions for NETINFO_ITEM and PCB_MARKER
2021-12-01 00:47:22 +01:00
5dcd6f89d3
Don't register DRC error on internal approximation
...
Users can set the internal approximation of curves, which will create
small errors off of ideal locations. This will cause DRC errors on some
items such as rounded rect pads when elements are routed at the minimum
ideal distance. Users could already tune this value using the Advanced
Config values but we'd rather the user not depend on that.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9833
2021-11-30 15:28:20 -08:00
3af65936c1
Don't consider heatsink, castellated or fiducial pads for THT vs SMD.
...
Also fixes a bug where the Footprint Checker's marker list wasn't cleared
correctly from the last run.
Fixes https://gitlab.com/kicad/code/kicad/issues/9821
2021-11-29 16:45:42 +00:00
3218665861
Revert "Sync action plugins every time PCB frame is created"
...
This reverts commit 69566b25b1https://gitlab.com/kicad/code/kicad/-/issues/9798
2021-11-28 16:16:14 -05:00
3886e681ae
PAD Copy CTOR: fix missing copy of m_pinType member.
2021-11-28 14:34:26 +01:00
f5246acf37
PCB_PAINTER: draw PAD do not always replace netname by "x".
...
When a pad net is edited inside the board editor, its netname is no longer
its corresponding pin netname.
Fixes #9795
https://gitlab.com/kicad/code/kicad/issues/9795
2021-11-28 14:34:26 +01:00
a746d31038
PNS: Fix loop removal outside shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9680
2021-11-27 15:21:47 -05:00
8a0f8c329f
PNS: Fix DP gateway generation when pad distance < gap
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9306
2021-11-27 14:03:19 -05:00
4b226b8172
Unify our breakTracks routines
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9793
2021-11-27 06:34:47 -08:00
b0d7c1a810
Don't leave orphaned nets in pads after editing in FPEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9789
2021-11-27 12:34:41 +00:00
b8b8c0d34c
dialog text properties: fix a focus issue.
...
Fixes #9792
https://gitlab.com/kicad/code/kicad/issues/9792
2021-11-27 10:08:30 +01:00
6652e5acf4
Draw pad holes when dragging.
...
Most of the time they're under the pad, but the provide needed
info when the hole is larger than the pad.
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:09 +00:00
9547c72e73
Teach router about different keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:04 +00:00
6f0a4ccdee
Formatting.
2021-11-26 18:14:29 +00:00
69566b25b1
Sync action plugins every time PCB frame is created
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9781
2021-11-26 09:58:48 -05:00
99ec2b1801
Don't hide original object when highlight is only part of it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9772
2021-11-25 23:42:13 +00:00
da458535c4
PNS: Avoid flickering clearances on new items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9773
2021-11-25 15:38:04 -05:00
63718323bc
PNS: Holes need to be moved with solids
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9773
2021-11-25 15:31:18 -05:00
8026863d4c
Use progress reporting in more places when loading a board
...
Prevents application-not-responding events while opening large designs
2021-11-25 11:19:03 -05:00
b4342d813b
Fix SHAPE_LINE_CHAIN::Slice when end is an arc followed by a point
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9770
2021-11-25 10:05:33 -05:00
ade8fe4333
When dragging footprints pads with holes also need to be taken along.
...
Otherwise (aside from not colliding with their dragged location) we
won't update their locations and then if they happen to be the first
pad in the footprint we'll try to update the footprint's location post-
drag with the pad offset (which will be {0,0}.
This is easily reproducible with the test document in the bug in the
"fixes" statement.
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-11-25 14:54:12 +00:00
f9e1429c60
Naming conventions.
2021-11-25 14:54:12 +00:00
5985a21b74
Offset internal items by drag amount.
...
Some tools move only preview items while keeping the real items
hidden. Those tools must use this new offset parameter.
Other tools move the real items. Those tools can ignore this
parameter (which will default to {0,0}).
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-11-25 14:54:12 +00:00
ba6ae4fa9b
Kicad has many plugins. This one is for the pcb.
2021-11-25 12:56:46 +00:00
6ecdbbb1da
Remove some duplicate work when loading a board
2021-11-24 22:04:16 -05:00
06f206104d
Pcbnew: fix chamfered rectangular pad definitions in GenCAD exporter.
...
The pad comparison function was never updated when chamfered rectangular
and custom pads were added so if more that one variant of either of those
pad types existed in a design, only the first one would get generated and
assign to every pad of that type.
The custom pad primitive comparison has not be implemented so the exported
designs may be broken for custom pads.
2021-11-24 12:54:44 -05:00
c0fdac2774
DIALOG_TRACK_VIA_PROPERTIES: Do not use wxcombobox selection as temporary variable.
...
Fixes #9746
https://gitlab.com/kicad/code/kicad/issues/9746
2021-11-24 17:36:10 +01:00
b6ea9afb4f
DIALOG_PAD_PROPERTIES: fix 2 issues: missing initial value for roundrect corner radius
...
and missing resize pad display panel (minor cosmetic issue).
Fixes #9755
https://gitlab.com/kicad/code/kicad/issues/9755
Fixes #9703
https://gitlab.com/kicad/code/kicad/issues/9703
2021-11-24 09:44:13 +01:00
f97c7c78c8
Connect ruler tool with axes preferences
...
Adds "UpdatePreferences" action that is called when the preferences are
updated, allowing running tools to act on changes that may affect them
Fixes https://gitlab.com/kicad/code/kicad/issues/9737
2021-11-23 12:52:21 -08:00
1c3e1df3ca
Not all holes are round.
...
We currently only need this to work for vias as we're a long way
from being able to support it for pads, so just check the hole
shape.
Fixes https://gitlab.com/kicad/code/kicad/issues/9735
2021-11-23 14:36:05 +00:00
e56e61ffb5
router: fix typo in the DP tuning fix patch
2021-11-23 00:21:38 +01:00
126563c839
Fix initilization project / ordering
...
We cannot resolve the Canvas type without the canvas being initialized.
But saving settings sometimes requests canvas access. This protects the
calls against failure by checking for canvas before saving
canvas-specific settings
Fixes https://gitlab.com/kicad/code/kicad/issues/9729
2021-11-22 11:47:42 -08:00
5060c73625
Reject broken footprint files
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9721
2021-11-22 16:48:05 +01:00
89228e1ebe
router: increase parallelity detection threshold for AssembleDiffPair()
...
Partially fixes the misrecognized diff pairs issue.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8567
2021-11-22 01:35:12 +01:00
8777ce3d4e
TEMP_SELECTED is in m_flags, not m_status.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9610
2021-11-21 23:52:45 +00:00
e60386f028
router: disable 'limit corner count' optimization for via dragging
...
It seems to be completely preventing optimization instead of preventing over-optimization in case the head is a dragged via.
To be investigated in more details in V7.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8665
2021-11-22 00:05:17 +01:00
ccf9a72078
router: fix ghost dots issue in router preview items
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8665
2021-11-22 00:05:17 +01:00
3f2d86adec
Make OpenGL default for all apps
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9699
2021-11-21 12:33:07 -08:00
bbafce6ab3
PNS: Don't clip the line in the middle of an arc - just start again
...
In shove mode, returning an empty line results in keeping the current
head, which should be okay for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
2021-11-21 19:53:03 +00:00
4e0ad07eb0
PNS::Shove Add margin when generating hulls for arc segments
...
Partially fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
There is still a case where if the shover does not find a solution,
we try clipping the arc and it still collides.
2021-11-21 17:13:21 +00:00
90157db537
PCB_PARSER: add timeout for of 100 ms for refreshing the progress window.
...
The previously used line number threshold was causing (on some systems) severe slowdown in loading
due to relatively long redraw time of the progress bar window.
2021-11-21 17:33:59 +01:00
b1878fcc54
ClipVertexRange: fix fallout of NextShape API change
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9711
2021-11-21 11:03:22 -05:00
302c5ab537
Fix an issue created by commit 9e3362d1.
...
the issue was the graphic cursor was locked on the first snap point
in route mode, once a snap point is found.
2021-11-21 15:37:03 +01:00
cf1d5f5724
Teach selectConnectedTracks() about layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9610
2021-11-21 13:53:43 +00:00
229706b48a
Formatting.
2021-11-21 13:53:43 +00:00
Jeff Young
Ian McInerney
Seth Hillbrand
Mikolaj Wielgus
Jon Evans
jean-pierre charras
Wayne Stambaugh
Tomasz Wlostowski
Simon Schaak
Roberto Fernandez Bautista