Commit Graph

62 Commits

Author SHA1 Message Date
Jeff Young 0fb864d596 Pull some name changes back from 7.0 to ease merging. 2021-07-21 20:58:59 +01:00
luz paz f968fc8719 Fix source comment / documentation typos 2021-06-09 19:32:58 +00:00
Marek Roszko 10e60acf34 Clean up including of board_design_settings.h 2021-06-06 15:03:42 -04:00
Ian McInerney 4f05262705 Cleanup includes in board.h and footprint.h 2021-06-03 20:19:52 +01:00
Marek Roszko 21fde9b629 enum class PCB_SHAPE_TYPE_T 2021-04-30 22:36:12 -04:00
Ian McInerney a94a481574 Fix compile warnings
Some simple warnings and also a deprecation warning from wx
because they felt that a function should be renamed...
2021-03-23 19:46:49 +00:00
Roberto Fernandez Bautista 50aafb9d2a Do not auto-refill zones when added or edited
The only exception is when using the Zone Properties Dialog and
user preference is enabled
2021-03-21 20:13:20 +00:00
Roberto Fernandez Bautista f6c4677189 ADDED Option to disable automatic zone filling in pcbnew
The new setting is stored as 'editing.auto_fill_zones' and controls
whether zones should be refilled after certain actions or not.
2021-03-21 20:13:20 +00:00
Jeff Young a01bd52571 Use default line width when creating polygons.
Fixes https://gitlab.com/kicad/code/kicad/issues/7876
2021-03-12 14:54:54 +00:00
Dominik Wernberger e2aa7be4b3 Added a lot of consts and refactored a few lines 2021-03-08 12:49:48 -08:00
Jon Evans 1e33928b96 Fix issues with zone filling connectivity locking
Two issues found with the locking system used to prevent access to
stale connectivity data during the zone fill process:

1) a std::mutex has undefined behavior if you try to use it to guard
against access from the same thread.  Because of the use of wx event
loops (and coroutines) it is entirely possible, and in some situations
inevitable, that the same thread will try to redraw the ratsnest in the
middle of zone refilling.

2) The mutex was only guarding the ZONE_FILLER::Fill method, but the callers
of that method also do connectivity updates as part of the COMMIT::Push.
Redrawing the ratsnest after the Fill but before the Push will result in
stale connectivity pointers to zone filled areas.

Fixed (1) by switching to a trivial spinlock implementation.  Spinlocks would
generally not be desirable if the contention for the connectivity data crossed
thread boundaries, but at the moment I believe it's guaranteed that the reads
and writes to connectivity that are guarded by this lock happen from the main
UI thread.  The writes are also quite rare compared to reads, and reads are
generally fast, so I'm not really worried about the UI thread spinning for any
real amount of time.

Fixed (2) by moving the locking location up to the call sites of
ZONE_FILLER::Fill.

This issue was quite difficult to reproduce, but I found a fairly reliable way:
It only happens (for me) on Windows, MSYS2 build, with wxWidgets 3.0
It also only happens if I restrict PcbNew to use 2 CPU cores.
With those conditions, I can reproduce the issue described in #6471 by
repeatedly editing a zone properties and changing its net.  The crash is
especially easy to trigger if you press some keys (such as 'e' for edit)
while the progress dialog is displayed.  It's easiest to do this in a debug
build as the slower KiCad is running, the bigger the window is to trigger this
bug.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/6471
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7048
2021-01-18 13:22:12 -05:00
Seth Hillbrand 5a3e5781bf Allow polygon drawing on edge cuts and courtyard
Prevents line splitting behavior needed in v5 when drawing polygons on
courtyards. Also provide property dialog with some smarts to handle
special layers

Fixes https://gitlab.com/kicad/code/kicad/issues/6900
2020-12-30 14:10:30 -08:00
Jeff Young acfbcb4beb Make distinction between PCBNew-wide tools and Board-specific tools.
The old names were really hard to keep straight (even for me, who named
many of them).
2020-12-16 13:32:46 +00:00
Jeff Young ec020dd19f First-class support for filled shapes. 2020-11-14 01:40:32 +00:00
Jeff Young bdbb68f813 MODULE -> FOOTPRINT. 2020-11-13 16:04:03 +00:00
Jeff Young 3451ac3088 PCB_MODULE_T -> PCB_FOOTPRINT_T 2020-11-13 15:16:24 +00:00
Jeff Young f7333ad64a Update some classnames including archaic zone names. 2020-11-12 10:31:25 +00:00
Jeff Young 0ebea4be53 Cleanup and naming conventions. 2020-11-07 18:50:30 +00:00
Jeff Young ea387f2f28 Don't segfault after doing a cutout which removes entire zone.
Fixes https://gitlab.com/kicad/code/kicad/issues/5532
2020-10-08 20:33:54 +01:00
Jeff Young 37906511f5 Class renaming.
DRAWSEGMENT  -> PCB_SHAPE
EDGE_MODULE  -> FP_SHAPE
TEXTE_PCB    -> PCB_TEXT
TEXTE_MODULE -> FP_TEXT
2020-10-05 11:55:33 +01:00
Jon Evans 18e17abd6a Rename "Keepout" to "Rule Area"
These objects can now be used in advanced DRC rules and
not just for keeping things out.  Also remove the restriction
that at least one of the "basic" keepout rules must be set,
so that these areas can be used for more advanced rules.
2020-09-21 23:55:02 -04:00
Jeff Young 4badcba4c2 Zone fill performance improvements
1) better load-balancing for deferred zones
2) sort zones by priority before filling
3) retire BOARD::GetZoneList() which had a horrible performance profile
4) implement a zone bounding box cache
5) better checks for IsCancelled() so long fills can be exited

Fixes https://gitlab.com/kicad/code/kicad/issues/5738
2020-09-21 21:09:58 +01:00
Jeff Young a6d44676b3 Move commit handling outside of ZoneFiller.
This allows us to rever the commit on a cancel.

Fixes https://gitlab.com/kicad/code/kicad/issues/5107
2020-08-12 22:20:07 +01:00
Jeff Young 4317881012 Improve delete-unused-layers to better handle multi-layer items.
Fixes https://gitlab.com/kicad/code/kicad/issues/5116
2020-08-09 15:39:51 +01:00
Jeff Young 00e77d1ba4 Implement pad & via aprons for hatched zones.
Fixes https://gitlab.com/kicad/code/kicad/issues/2519
2020-08-07 15:15:43 +01:00
Jon Evans 0d4ee39f75 CHANGED: Copper zones can be on more than one layer
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1963
2020-06-28 08:52:37 -04:00
Jeff Young 367fd79b5f Don't try and second-guess the user.
(Especially now that polygons are useful on copper layers for custom
pad shapes.)
2020-06-27 22:08:13 +01:00
Jon Evans 2ab9ceaf02 Pick up net for new zone from selection if no net is highlighted
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4706
2020-06-23 17:16:34 -04:00
Jon Evans c7daf8a8f3 ADDED: Cross-probe highlighting of bus members
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
2020-05-24 13:30:23 -04:00
Michael Kavanagh e05f36f9a7 Convert graphic polygons on CrtYd layers to lines
Same restriction as Edge_Cuts, due to their intended purpose polygons
don't make sense.
2020-04-26 18:51:47 +00:00
jean-pierre charras 78a7c7dfe0 Zones: fix a crash when adding a zone cutout to a zone having already holes.
Fixes #4039
https://gitlab.com/kicad/code/kicad/issues/4039
2020-03-12 14:42:32 +01:00
Seth Hillbrand 6983c56cf8 Use const references where possible
This avoids copy cost on local vars where we only read.
2019-12-05 14:40:22 -08:00
jean-pierre charras bc5dcf182f keepout in footprint: fix some crashes and issues. Create a specific type (PCB_MODULE_ZONE_AREA_T) for zones in footprint. The new class (MODULE_ZONE_CONTAINER) is the same as ZONE_CONTAINER, but the type ID is PCB_MODULE_ZONE_AREA_T instead of PCB_ZONE_AREA_T.
This is mandatory because these zones must be handled differently in many functions.
2019-10-29 11:24:57 +01:00
Ross Schlaikjer 64a42ffa35 Add keepout in footprints: Starting point. 2019-10-29 11:24:30 +01:00
Seth Hillbrand bae50fab9f pcbnew: Fix 45° snapping polygons
The constrained draw was constraining the polygon size to fit the
existing points rather than extending the existing points to fit the
user's intent.

This adds a 90° double-joint for the completion polygon that allows the
user to complete common constrained polygons visually based on the
preview with a double-click to finish.
2019-10-24 16:01:14 -07:00
Seth Hillbrand 2e1af66a2b pcbnew: Commit polygon points to new constrained zone
Adds leader points if they are not already existing in the zone

Fixes: lp:1846028
* https://bugs.launchpad.net/kicad/+bug/1846028
2019-10-20 09:29:35 -07:00
Seth Hillbrand b3615b36bb pcbnew: Retain 45° constraint
This also finishes the polygon with 45° lines when chosen as a create
option.

Fixes: lp:1833673
* https://bugs.launchpad.net/kicad/+bug/1833673

(cherry picked from commit fccce265aa)
2019-08-26 14:36:23 -07:00
Jeff Young a3c74051c2 Allow edits to self-intersecting polygons.
1) Intermediate states might be self-intersecting, and we shouldn't
be policing our users on what order to do things in
2) The polygon might already be self-intersecting, at which point we're
preventing the user from fixing it.

Also includes better const management for SHAPE_POLY_SET API.

Fixes: lp:1833831
* https://bugs.launchpad.net/kicad/+bug/1833831
2019-07-14 18:18:48 +01:00
Jeff Young 1dbaa89f95 Fix a bug in tool activation/deactivation and another illegal static_cast.
Fixes: lp:1836419
* https://bugs.launchpad.net/kicad/+bug/1836419
2019-07-14 10:39:38 +01:00
Seth Hillbrand c86b4928a7 Fix assert in footprint editor
PCB_EDIT_FRAME does not return for footprint editor.  The
PCB_EDIT_BASE_FRAME is needed for common fns between pcbnew and modedit
2019-07-12 13:34:30 -07:00
Jeff Young 2f23aa9556 Implement a more robust tool stacking architecture.
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop.  (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)

The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
2019-06-27 17:01:31 +01:00
Jeff Young f9702aab87 Immediate actions for PlEditor, PcbNew, etc. 2019-06-25 11:34:28 +01:00
Seth Hillbrand efe880bb79 pcbnew: Fix zone cutout duplication
When creating the zone cutout, we delete the old zone and add a new one
with each cutout.  This requires resetting the source zone and clearing
our previous selection if we would like to continue using the cutout
tool on the new zone.

Fixes: lp:1812339
* https://bugs.launchpad.net/kicad/+bug/1812339
2019-01-23 06:42:07 -08:00
Seth Hillbrand d3a67e255d pcbnew: Polygon tool on EdgeCuts adds polylines
Edge cuts are more easily edited when they are polylines not polygons
and this keeps the files backwards compatible with v5.0.x.
2018-12-10 06:10:57 -08:00
Jeff Young befc504734 Warp cursor back to creation point after new-text dailog.
Also fixes same issue for new zones.

Fixes: lp:1802532
* https://bugs.launchpad.net/kicad/+bug/1802532
2018-11-11 20:26:19 +00:00
Seth Hillbrand f714d2fa64 pcbnew: draw polygon and element previews on layer
This ensures that when starting to draw a zone or graphic element, the
preview is drawn in the same color/on the same layer as the element that
will be created.  Previously, beginning a graphic polygon while a copper
layer was active would result in the preview being drawn in the color of
the active copper layer.
2018-10-03 17:23:56 -07:00
Tomasz Wlostowski 099fcf1247 ZONE_CREATE_HELPER: fix zone cutout creation in zones with holes, reinit selection with the resulting zone
Fixes: lp:1784268
* https://bugs.launchpad.net/kicad/+bug/1784268
2018-07-31 22:34:56 +02:00
Maciej Suminski 630631b41b Code formatting 2018-07-26 16:04:31 +02:00
Tomasz Wlostowski a9af4d0141 ZONE_CREATE_HELPER: fixed crash when adding a cutout to a zone
Fixes: lp:1783541
* https://bugs.launchpad.net/kicad/+bug/1783541
2018-07-26 15:30:21 +02:00
Jeff Young 92dcf43ae8 UNIT_BINDERize zone dialogs.
Also includes a bunch of changes to simplifiy the terminology
and unify the copper, non-copper and keepout versions.

Also removes some legacy features:
Removes contol for fill method.  If the fill method is currently
segments the dialog will ask if you want to convert to polygons
on OK.
Removes control of boundary resolution.  We've done this with trig
since 5.0.

(cherry picked from commit 487aaeb)
2018-07-17 15:11:32 +01:00