d36fbb864f
KiCad2Step code cleaning.
2021-07-29 07:10:58 -04:00
05a5a2416a
IDF code housekeeping.
2021-07-28 07:14:27 -04:00
369d813a32
Pass std::string by reference instead of on the stack where applicable.
2021-07-27 13:30:05 -04:00
c794a6ce7a
Add pdb install option for msvc
2021-07-14 23:42:45 -04:00
702c0d6f72
Step export: shows a report message if a 3D model is not loadable:
...
- When a vrml model is specified and model substitution is not allowed
- When the model substitution is allowed but the step model is not found
2021-07-08 17:22:33 +02:00
4025603a1f
Formatting.
2021-07-06 21:36:27 +01:00
2c1da70181
Write all variables to temp config file and have Kicad2Step use that.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7670
2021-06-14 16:54:45 +01:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
b891b5e1e2
Do not blindly substitute model names
...
Makes model substitution (VRML->STEP in STEP Export) optional. This can
prevent nasty surprises where the user doesn't see/can't affect the
outcome
Also, when substituting models, do not maintain scale factor. So a VRML
model with non-unity scaling will not be export as a STEP file (of the
same name) with non-unity scaling. This is the first step to address
https://gitlab.com/kicad/code/kicad/-/issues/1781
2021-06-08 16:38:47 -07:00
ab82b01714
Evict the last bits of wx.h
2021-06-07 20:23:27 -04:00
6b1dfca0ba
Silence the msvc warning about double to int conversion
2021-06-06 09:45:03 -04:00
82e306bec3
Remove wx/wx.h from idf_helpers.h
2021-06-06 09:37:29 -04:00
d7616fdca8
Fix a few compil or coverity warnings.
2021-06-01 09:04:37 +02:00
1632707d9b
Replace tabs with spaces
2021-04-05 01:13:39 +00:00
6b1658a098
kicad2step: fix incorrect Bezier curve handling.
...
Fixes #7930
https://gitlab.com/kicad/code/kicad/issues/7930
2021-03-22 11:08:40 +01:00
4a53917efa
wrml exporter: optimize circle to segment approximation.
2021-03-20 18:16:58 +01:00
658bc2f4b2
kicad2step: provide a basic default product name
...
It would be ideal if it would use the s-expr
kicad_pcb.general.title_block.title by default, and then fall back to
something based on the output step file, but even just the output step
file is a far better default than the "open cascade step translator
version..." text it uses at the moment.
Similar improvements using the title_block would be future work.
Signed-off-by: Karl Palsson <karlp@etactica.com>
2021-03-04 17:01:07 +00:00
1d3159c1cb
Add support for PKZIP-based stpZ files
...
FreeCAD uses gzip-based stpZ files but many programs will compress using
the archive format of PKZIP (e.g. WinZIP). This handles the archive
format, taking the first file from the archive, which by the standard
should be the STEP file
Fixes https://gitlab.com/kicad/code/kicad/issues/5376
2021-02-27 16:44:54 -08:00
b823c49a95
Handle polygons in step export
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7707
2021-02-25 09:50:01 -08:00
6a39b81647
Fix the last of broken Doxygen comment specifiers.
2021-01-27 17:39:44 -05:00
07635d2fc7
Minor adjustments
2021-01-12 20:51:31 +00:00
ac94d72d2d
Add more const specifiers
2021-01-12 20:51:31 +00:00
cdd4953589
STEP export: fix crash when a rectangle is used in a footprint.
...
Fixes #6958
https://gitlab.com/kicad/code/kicad/issues/6958
2021-01-07 09:24:30 +01:00
d1f782717e
Handle rect and bezier in footprint exports
...
Teach kicad2step about footprint edgecuts that use fp_curve and fp_rect
Fixes https://gitlab.com/kicad/code/kicad/issues/65054
2021-01-03 12:08:12 -08:00
5db75805bd
Step exporter: better values for min distance between 2 points to merge them.
...
- The default value is 0.01 mm (according to comments and similar to the 3D viewer
settings that uses 0.02 mm)
- The export dialog has now 3 values 1 micron, 0.01mm (default) and 0.1 mm
The 0.1 micron option is removed: it makes no sense for a mechanical tolerance.
2021-01-03 11:01:03 +01:00
a9feb1c2d4
Update PCBMODEL::SetMinDistance to set BRepBuilderAPI precision
...
Fixes #3818
2021-01-03 08:40:40 +00:00
8de9cff4e0
Change environmental variables to human-readable
...
Versions specific variables that may point to objects that change
through versions, allowing multiple KiCad versions to operate correctly
(even on MSW) on the same machine.
2021-01-01 16:20:35 +00:00
7565f60a03
Swap wxFileInputStream/wxFileOutputStream for the buffered kind
2020-12-12 18:52:02 -05:00
dd4298bb94
Coverity fixes: 280374, 313611, 313648, 313649, and 314720.
2020-12-11 13:29:52 -05:00
99da663e82
Remove unused variables plus some more fixes from CppCheck
...
Remove unused variables plus a few more fixes from CppCheck
Remove unused variables plus a few more fixes from CppCheck
2020-11-19 02:28:47 +00:00
0e44f5128c
Add const specifiers
2020-11-18 19:50:36 +00:00
a207bd97bb
Naming conventions.
2020-11-17 16:05:49 +00:00
723b9e6a77
Fix kicad2step sexpr parser to include new footprint token.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6406
2020-11-17 08:49:24 -05:00
61bca4aaa4
A bit of "module" erradication, nameing conventions, and formatting.
2020-11-14 21:21:54 +00:00
666c11965a
Clean up some more MODULE terms.
2020-11-14 19:56:06 +00:00
9ed6cdd943
Remove GITHUB plugins
...
KiCad github downloads are no longer supported
Fixes https://gitlab.com/kicad/code/kicad/issues/6182
2020-10-29 16:45:04 -07:00
d4eb7b0f3d
Step export: fix Bezier curves export.
...
Fixes #6054
https://gitlab.com/kicad/code/kicad/issues/6054
2020-10-21 10:18:03 +02:00
4085757aeb
Remove beginning/ending spaces in translations
...
Adding space padding makes translations more difficult by increasing
string counts
2020-10-20 12:08:04 -07:00
7414a62947
Attempt to support Bezier curves in STEP export: a fix.
...
The curve is still exported as segment
2020-10-20 18:40:01 +02:00
12b106aba4
Attempt to support Bezier curves in STEP export. First code.
...
The bezier curves are in this code replaced by a segm between
the 2 ends curves
2020-10-20 16:45:38 +02:00
f18fb9fe64
Step exporter: fix a wxWidgets alert.
...
Fixes #4760
https://gitlab.com/kicad/code/kicad/issues/4760
2020-10-06 21:40:39 +02:00
63471d861d
Step exporter: avoid crash when the board to export has not closed outlines.
2020-10-06 16:03:43 +02:00
b7e7cf9212
Some code cleanup
2020-09-22 12:29:55 +01:00
c40470ed0b
Initialize more variables
2020-09-22 12:29:13 +01:00
de12d40ee6
Remove OGLTest
...
We don't use this utility nor do we have plans to
2020-09-12 06:46:46 -07:00
904d186f6d
Don't export hidden models to STEP.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5451
2020-09-03 22:59:45 +01:00
f1b1e59cf0
Catch error when decompressing
...
Make sure we catch errors when thrown by zlib
Fixes https://gitlab.com/kicad/code/kicad/issues/5376
2020-08-26 14:19:46 -07:00
d0e43ab9f1
STEP: Export stpz files
...
Also include .stpz files as alternates to wrl/wrz models
2020-08-25 19:27:44 -07:00
ede39780e2
Remove all debugging output that cannot be disabled.
...
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
2020-08-18 10:17:36 -04:00
e3988b446a
Adjust pointer duplication logic
2020-08-18 11:11:41 +00:00
Wayne Stambaugh
Marek Roszko
jean-pierre charras
Jeff Young
luz paz
Seth Hillbrand
Marcus A. Romer
Karl Palsson
Dominik Wernberger
Mikołaj Wielgus
Ian McInerney