CHANGED: The margin used in 'Zoom to Fit' is now 2% instead of 10%.
ADDED: Added 'Zoom to Objects' to Eeschema which does not include
the page and border in the bbox calculations.
CHANGED: Removed pre-existing code that tweaked the center to account
for the scrollbars. It actually made the view off center. Removing it
results in perfectly centered zooms.
Fixes https://gitlab.com/kicad/code/kicad/issues/5145
This is a board file format change to account for the new properties.
Also, we now only store the critical information about the dimension's
geometry in the board, rather than storing every drawn line.
The DIMENSION object is now an abstract base, and ALIGNED_DIMENSION
is the implementation that exists today (we will add more dimension
types in the future)
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
There was a regression in v6 where the zoom to selection toolbar
item wasn't canceling the tool when pressed and the tool was active
(it was in v5). This implements a more generic framework for canceling
tools on button presses.
Fixes https://gitlab.com/kicad/code/kicad/issues/5103
Also moves to WX_GRID to get rid of some wxGrid bugs, and moves the
provision of attrs to the GRID_TABLE (as those applied to the grid
are ignored when a table is specified).
Fixes https://gitlab.com/kicad/code/kicad/issues/5260
For instance, we get things like high-contrast-mode from the pad
dialog when rendering a pad preview, but we want the colours from the
parent PCB_BASE_FRAME.
windowClosing() calls Destroy() when the wxCloseEvent has no veto.
This is fine for usual EDA_BASE_FRAME frames, but not for frames shown in modal mode.
In modal mode, windowClosing() should not call Destroy(), because the calling frame
expects the instance not deleted after closing.
(the caller has to call Destroy() only once the frame can be actually deleted)
The center point on polygons now maintains the axis of the dragged line
and, optionally with Ctrl pressed, maintains the slope of the adjacent
segments as well.
This also fixes a longstanding issue that prevented the ctrl-snapping
from using the original point rather than the last updated point when
constraining.
Fixes https://gitlab.com/kicad/code/kicad/issues/2465
This commit adds support for display origin transforms to the PCB_BASE_FRAME
class. This instantiates a PCB_ORIGIN_TRANSFORMS object, and overrides the
GetOriginTransforms method in the EDA_DRAW_FRAME class to reference it.
The formatting of the status line has been updated to display coordinates
relative to the user-selected origin, and with the coordinates increasing
in the user-selected direction.
This commit adds the user configuration options to support display
origin transforms to the PCB_DISPLAY_OPTIONS class. This data is
configured by the "Origins & Axes" preferences panel added in a
later commit.
This commit modifies the UNIT_BINDER class to invoke the ORIGIN_TRANSFORMS
methods to support Display Origin Transforms.
The EDA_DRAW_FRAME class is modified to instantiate an ORIGIN_TRANSFORMS
object providing null transforms. A function is provided to allow the
UNIT_BINDER to find the ORIGIN_TRANSFORMS object in an overrideable manner.
This commit adds the ORIGIN_TRANSFORMS class to support Display Origin
Transforms in all KiCad applications.
Functions are provided to perform four basic types of origin coordinate
transforms:
* Transform a relative coordinate from internal to display form
* Transform a relative coordinate from display to internal form
* Transform an absolute coordinate from internal to display form
* Transform an absolute coordinate from display to internal form
These functions are supported for data types "int", "long long int",
and "double". The default implementations for all but "int" simply
return their input unchanged; the implementation for "int" invokes
the implementation for "long long int".
The expectation is that the different KiCad applications will create
derived classes from this base class and override the functions as
needed. Protected template functions are provided for the standard
translations to maintain consistency within the derived classes.
Display warning infobar in the board/schematic setup when no project
is loaded, since most of the settings in those dialogs are saved in
the project and not in the board/schematic file.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4868
Short net names are not unique; full names with paths must be used.
Added a grid cell renderer that does the escaping, to make it easier
to display net names in grid cells.
Once you unescape a net name, you can't go back to the escaped form
because you can't assume which `/` should be {slash} and which `/`
Because of this, we cannot use Unescape/Escape on the data model in
the netclass setup panel, and instead do the Unescape in the view.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5331
This time remove the push/pop from the picker tools as that's
responsible for the issue of trying to re-activate the move action
when its popped. Instead do the push/pop from the client code
of other actions that need it, and not at all from the move-with-
reference action.
Fixes https://gitlab.com/kicad/code/kicad/issues/5336
* Make the app progress indicator only have the indeterminate state
when the taskbar indicator is used (causes an uused variable warning
on wx<3.1)
* Remove unused dry run variable in pcb_netlist.h
* Remove unused forceDropAnnotations from the paste special dialog
since the dialog only controls keeping them.
wxScrolledCanvas is not properly exported, so when we
add a wxGrid it has a chance of creating linker errors.
Including the wx/grid.h ensures that the linker does not
see two conflicting symbols between gal and the other
place where wxGrid is used.
ADDED: Allow DXF/SVG graphics to be imported as a group
Also, cleanup the placement routine to allow the edit tool's flip
and rotate routines to be used when placing the items.
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
Flags != language See http://www.flagsarenotlanguages.com We now use
local, untranslated language names for all languages.
Languages that have not been updated in >5 years and have less than 15%
of available strings translated have been removed from the menu options.
If a translator steps up to update the .po files, we can re-add them
This leaves the decision to check/enable menu items to the main UI
conditions, and only the menu has control over showing/hiding the menu
items. Also rip out a special case for the preferenes item that isn't
needed on OSX anymore since all the main menus have been moved to
ACTION_MENUs now.
* Frames moved: cvpcb, cvpcb footprints frame, gerbview, pagelayout editor
This also introduces new EDITOR_CONDITIONS that are used to set the
conditions of very common editor settings.
Also, some IDs were converted to tools in the pagelayout editor.
This allows for the tool framework to keep track of a universal
set of conditions for the UI state (enabled/checked/shown) for
controls of actions. It removes the need for the main menubar
menus to be CONDITIONAL_MENUs and be rebuilt on each open,
and instead makes the updates of the check and enabling of
items handled in the native wxWidgets way.
This commit switchs the 3d viewer and kicad project manager window
over to this system.
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
The variables in the common settings struct are only updated on
save, so Python must use the ones from Pgm to get its values.
This does lead to the observation that Python's changes to the
variables do affect KiCad (they can break resolvers). So apparently
it can mess with us but we can't mess with it easily.
Also, improve the environment variable tracing infrastructure to capture
more changes.
The base GAL has the linewidth property already, and its
accessor will only return the base version. This was causing
problems with the Cairo printing GAL, since that setter wasn't
using the base class version. Also, this removes the print-specific
setter, since the actual setting of line width shouldn't be done
there and is instead done where the drawing happens.
Fixes https://gitlab.com/kicad/code/kicad/issues/5089
This ensures the colors used by the status text pane in the preview
widget are the same as the canvas, so there is a seemless transition
between the two.
Additionally, remove the scrollbars from the symbol preview widget
in the place symbol dialog - they are pointless.
Before this, the environment variables inside Python wouldn't reflect
the updates to them made after the interpreter was started in Pcbnew.
This will call into Python and set the variables when they are changed,
since Python can't synchronize itself when running in an embedded
interpreter.
Fixes https://gitlab.com/kicad/code/kicad/issues/5071
ADDED: Progress indicator in the taskbar
This adds a progress indicator to the Windows and macOS taskbar
icons to display the progress of some operations.
Note, this requires wxWidgets 3.1+
KiCad stores 3D cache files but never gets rid of any of them.
This patch adds a new function called 'CleanCacheDir()'. Any cache
files older than the passed 'number of days' parameter are deleted.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1928
Store list of previously open projects only in kicad.json
Keep all management of open projects in SETTINGS_MANAGER
Also add kicadSettings() for convenience
On platforms with limited framebuffer attachments, like GC7000L
driven by the open source etnaviv driver, we can still use
GPU acceleration by drawing directly to the main buffer.
EDA_DRAW_PANEL_GAL::onPaint checks if an overlay target is
available in the GAL, and if not, redraws the whole view if the
overlay target should be dirty.
Clearing of the overlay target is a no-op if there is no overlay
buffer.
Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
The fix convert all std::string storing a path to wxString (unicode support)
wxString were already used at many place to store paths, but not all.
For internal calculations mixing char strings and wide char strings is a recipe
for bug: any missing conversion between UTF8 and wxString breaks paths.
By default KiCad will now print each polygon point on its own line.
This adds to the vertical distance for large polygons but makes revision
control much cleaner as single point addition to a polygon does not
propagate to a diff over the full polygon.
Users/developers who want to save the files using the 4-points per line
have the ADVANCED_CONFIG setting 'CompactSave' which will provide the
original save method
This way, when the user changes their color theme, any sheets
that did not have a specific color set will change with the theme.
Also add a button to clear color overrides from a sheet, because
any schematics that have been saved before this change will have
the colors set to something other than UNSPECIFIED.
This API doesn't transfer ownership, so no smart pointers are required --
this just needlessly tightens requirements on the user of the interface.
(Fixes five instances of MSVC C26410 warning)
Ian McInerney
PJM
Jeff Young
Jon Evans
Seth Hillbrand
Roberto Fernandez Bautista
Tomasz Wlostowski
jean-pierre charras
Mark Roszko
Fabien Corona
Reece R. Pollack
Thomas Pointhuber
Wayne Stambaugh
Qbort
Joshua Redstone
bjpiccioni
Peter Montgomery
mntmn
Simon Richter