Use GetPath() instead of GetFullPath() when initializing environment
variable table entries KICAD_SYMBOL_DIR and KICAD_PTEMPALTE due to
unexpected trailing path separator which was causing find libraries
by URI to fail.
Don't create a project symbol library table when there are no libraries
not found in the global symbol library table.
Don't add non-existent libraries to project symbol library table.
Clear symbol library table when loading a new schematic.
Minor remapping status message improvements.
Create a new dialog to edit global and project specific symbol library
tables.
Add menu entries for new symbol library table editor in schematic editor
and symbol library editor main frame menus.
Add command event handler for symbol library table editor dialog to
SCH_BASE_FRAME so it is accessible from derived frames.
Fix bug in default environment variables initialization. A test for
existing user defined environment variables was preventing any new
default environment variables added to the list from being initialized.
Add loading symbol library table code to schematic PROJECT object.
Fix minor issues with loading global symbol library table.
Add default symbol library path environment variable to the environment
variable list and change the variable name to KICAD_SYMBOL_DIR.
Add code to SCH_SCREENS to test if all library nicknames of the symbol
library IDs are empty.
Remove unnecessary KICAD_USE_SCH_IO_MANAGER build option.
This function is called only from three sites, it doesn't need to be in
common.h.
The implementation was already in systemdirsappend.cpp, so a matching
header was created for it.
This reduces the visibility of the function to only the files that need
it and slightly shrinks common.h.
The global ::LockFile() function is used in a single place, but it's in
common.h, so visible to all files.
The GetKicadLockFilePath function is used in only two places, and one of
them is LockFile.
This commit puts them both in a separate header, so they're only visible
to code using them.
The implementation of GetKicadLockFilePath is moved to lockfile.cpp,
where LockFile already was.
Also removed a (large) handful of wxT macros, which aren't needed any
more and make code less readable.
*) Extend SWIG support deeper into the BOARD class.
*) Move swig *.i files into a directory identified for SWIG, in preparation
for a parallel universe involving Phoenix's SIP.
*) Move swig files which will be common to both eeschema and pcbnew into
common/swig.
*) Sketch out a "common" python module, and plan on dovetailing that into a
libkicad_shared.{dll,so}
*) Add common/swig/ki_exceptions.i and define a macro HANDLE_EXCEPTIONS()
which is to be applied to any function which needs C++ to python
exception translation.
*) Move the test for SWIG tool into top level CMakeLists.txt file for use
in all python modules beyond pcbnew, i.e. eeschema and common.
*) Add SWIG_MODULE_pcbnew_EXTRA_DEPS which generates a better Makefile, one
which rebuilds the swig generated *.cxx file when one of its dependencies
change.
*) Re-architect the board.i file so that it can be split into multiple *.i
files easily.
*) Make some KIWAY from python progress, in preparation for Modular KiCad
phase III.
The functions involved in the problem were PGM_BASE::GetEditorName and
EDA_BASE_FRAME::OnSelectPreferredEditor:
1) OnSelectPreferredEditor showed a dialog to allow the user selecting the
editor, but before that called GetEditorName to get the name of the current
editor (to show as a default in the choose file dialog).
2) The problem was when there was no editor, GetEditorName showed its own
dialog.
3) So the user was seeing first the dialog from (2) and then the dialog from
(1).
4) As GetEditorName is used in many other places the solution I did was to add
to it an optional parameter that tells it what to do if no editor is set. To
avoid modifying other code that relies on the current behaviour, this parameter
has a default value that causes to show the dialog. But now when
OnSelectPreferredEditor calls it, it passes the parameter that causes it to
return an empty string if no editor was set.
5) Also, I found a second bug while doing it which allowed in the first dialog
to select an unexistent file (the dialog was missing the wxFD_FILE_MUST_EXIST
flag).
6) Lastly, to avoid having duplicated code (the one that showed the same dialog
and that configured the wildcard was in two methods) I created a single
function that now both functions call: PGM_BASE::AskUserForPreferredEditor.
This way we also will have consistency in the behaviour of both dialogs and
there is a single place where it needs to be modified.
* Dick Hollenbeck also contributed commit r6440. I inadvertently forgot to set
the Bazaar author tag before I committed it. My apologies.
* Switch to static linking of libcurl and on linux and windows and also
statically link in only required portions of openssl.
* Add the required thread locks which openssl needs.
* Remove the get curl version call from BASEFRAME since it pulls in curl and
openssl into every derived wxFrame class link image.
* Remove curl function from PGM_BASE, switch to atexit() instead. Anything in
PGM_BASE made the singletops bigger.
* Tested on Linux, Windows, and OSX.
* Prevent libcurl from inadvertently being initialized twice.
* Dynamically load libcurl only when required.
* Reduce the number of worker threads when loading footprint libraries to
prevent issues with the GitHub plugin.
* Rename Eda_FileSelector to EDA_FILE_SELECTOR.
* Add optional pointer to wxString to save the most recently used path to EDA_FILE_SELECTOR.
* Rename Eda_DirectorySelector to EDA_PATH_SELECTOR.
* Replace wxGetCwd() with wxStandardPaths::GetDocumentsDir(). This fixes the windows issue
where wxGetCwd() returns the path where the executable files are located.
* Add code to handle most recently used path to EDA_BASE_FRAME.
* Fix string formatting error in kicad/files-io.cpp.
* Remove setting and restoring current working directory when launching GerbView. Setting the CWD
has no effect on the launched executable which starts with it's own CWD.
* Allow project path to be passed to GerbView when launched from KiCad.
* Note: this is a work in progress. Do not expect every path and/or file selection dialog to properly
update the most recently used path. The correct solution to this problem requires a much more
well though out solution which will not happen until after the next stable release.
* Mainly the wxDialog that was opened when the wizard is created is now no more created by the wizard frame CTOR. On some W.M. it created a serious issue related to the way Event Loops are managed. Now the user has to call it by the toolbar tool.
* 2 settings not saved in config are now saved.
* a few other minor enhancements
* better icon in footprint wizard frame
Remove a few #define relative to the wxWidgets 2.8 version, no more supported.
* Remove redundant definition of KICAD_DATA_PATH since DEFAULT_INSTALL_PATH
was already defined.
* Use DEFAULT_INSTALL_PATH as the substitution for the default environment
variable paths.
* Add option to define DEFAULT_INSTALL_PATH during CMake configuration with
fall back to CMAKE_INSTALL_PREFIX if not not defined.
* Developer note: this change is primarily for package builders where
CMAKE_INSTALL_PATH is the path where the package builder temporarily
installs the build output before creating the package. When building
packages, DEFAULT_INSTALL_PATH should be set to the path where the
package will be installed by default.
* Create new dialog to edit environment variables.
* Add helper class ENV_VAR_ITEM to manage environment variable values and
if they were defined externally.
* A path configuration dialog access to KiCad, CvPcb, Pcbnew, and Footprint Editor
window menus.
* Add validator for environment variables.
* Check to see if image handler is already initialized to prevent warning
on debug builds.
* Change LIB_PART destructor message output to use wxLogDebug for debugging
on windows builds.
* Minor code cleaning and coding policy fixes.
* Create GetNewConfig() and GetKicadConfigPath() to unify configuration file
creation and location.
* Move Windows configuration out of the registry into configuration files.
* Move Linux configuration files from $HOME to $HOME/.config/kicad to eliminate
configuration file pollution in the users $HOME folder.
* Fix a bug in the configuration file where the Eeschema hot keys are saved.
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
get disassociated from their true PROJECT.
*) Allow loading eeschema library editor from kicad.exe
*) Allow loading pcbnew library editor from kicad.exe
*) Rename LIB_COMPONENT to LIB_PART.
*) Add class PART_LIBS, and PART_LIB.
*) Make PART_LIBS non-global, i.e. PROJECT specific.
*) Implement "data on demand" for PART_LIBS
*) Implement "data on demand" for schematic SEARCH_STACK.
*) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
*) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
a weak pointer.
*) Remove all chdir() calls so projects don't need to be CWD.
*) Romove APPEND support from OpenProjectFiles().
*) Make OpenProjectFiles() robust, even for creating new projects.
*) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
and save them in the .eeschema config file, not in the project file.
*) Fix bug with wxDir() while accessing protected dirs in kicad.exe
*) Consolidate template copying into PROJECT class, not in kicad.exe source.
*) Generally untangle eeschema, making its libraries not global but rather
held in the PROJECT.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
Carsten Schoenert
Seth Hillbrand
Jeff Young
jean-pierre charras
Wayne Stambaugh
Fabrizio Tappero
Simon Wells
John Beard
Dick Hollenbeck
ejs-ejs
dwilches
Chris Pavlina
Wayne Stambaugh
Mark Roszko
Bernhard Stegmaier
Jose Ingnacio
Moses McKnight
Lorenzo Marcantonio