ADDED: Back annotation algorithm,
eeschema back annotation dialog
CHANGED: added some minor helper methods to SCH_REFERENCE_LIST and SCH_REFERENCE,
split SCH_REFERENCE_LIST::CheckAnnotation on 2 parts to reuse code
Bus submenus weren't sending events because tool wasn't set.
Net names need to be unescaped for display.
Unfolding wasn't drawing the new wire segments.
SCH_LINE_WIRE_BUS_TOOL could get caught in an infinite event handling loop.
Fixes https://gitlab.com/kicad/code/kicad/issues/3796
Scope: NETLIST_ITEM, CONNECTION_TYPE, ELECTRICAL_PINTYPE,
NET_CONNECTION, NETLIST_ITEM, GRAPHIC_PINSHAPE
Note, the pin type enum had PT_ added to the front to prevent
shadowing of the INPUT symbol on msys2 (see discussion at
c17c9960d8)
dynamic_cast could not resolve the cast chain leading to a null undo
point. Since we know the item to be LIB_ITEM, we can use static_cast
anyway and avoid the overhead.
Fixes#3771 | https://gitlab.com/kicad/code/kicad/issues/3771
This also removes vector cover types which do nothing except obfuscate
the underlying implementation.
Mainly changes SCH_SHEET_PINS and CONFIG_PARAM_ARRAY (which will soon
be replaced by Jon's new stuff).
* Ensure the lib edit undo checks for pointer validity
* Assert that the frames are the correct type (satisfies coverity)
* Convert C casts to C++ casts
It served us (mostly) well for more than a decade. It helped KiCad grow
before the std:: came into decent shape or speed. It was a good little
list.
RIP DLIST 2008-2020
This moves EESchema DLIST structures to rtree. These changes are more
fundamental than the pcbnew changes from 9163ac543888c01d11d1877d7c1
and 961b22d60 as eeschema operations were more dependent on passing
drawing list references around with SCH_ITEM* objects.
For legacy reasons, it stored left and right "spin" as flipped integers in the file format.
But the code handled the flip in multiple locations rather than just doing it on file io.
This change unifies the internal code and does the mapping in the file I/O.
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906.
ADD: User can now decide to keep the hierarchy navigator open while working
on a schematic.
This behavior can be configured in eeschema->preferences->eeschema->Editing options.
When dragging we'll create new line segments between selection-edge
objects and things outside the selection that they're attached to.
These new lines have their IS_NEW flags set, but shouldn't fool us
into thinking that the selection contains pasted (or placed) items.
ADDED: a config option to select (when clicking on a pin) the parent symbol
or only the pin.
Previously, when cliking on a pin, the parent symbol was selected.
Allowing the pin selection is mandatory in cross probing, and to display the pin
characteristics in some cases, for instance if a pin is flagged by the ERC tooL.
There is no need to create a new root symbol and re-parent all derived
symbols when renaming a root symbol. Just rename the buffered root
symbol.
Test for duplicate symbol names when validating the properties dialog
information to prevent broken symbol pointers.
Fix a field drawing bug when editing derived symbols.
Fix bug to insure duplicate symbol names cannot exist in a library.
Fixes kicad/code/kicad#3654
Fixes kicad/code/kicad#3672
Apparently the schematic and symbol library editors now have common
selection filtering so checking for a valid LIB_EDIT_FRAME when
filtering for the schematic editor frame prevented all schematic
object from being selected.
The symbol editor selection criteria did not include LIB_FIELD objects
which allowed the root symbol name to be changed causing broken derived
symbol links. Disable the symbols fields from being edited when a
derived part is shown in the editor to prevent this.
Add a missing warning that deleting a root symbol used to derive other
symbols would also delete all derived symbols from a library. Give the
user a chance to cancel the delete operation in this case.
Fixes kicad/code/kicad#3654
Don't clobber value file when load aliases in legacy symbol library cache
parser.
Use actual symbol library LIB_PART pointer rather than a flattened copy
of the symbol. This fixed a bug when displaying the parent field in the
message panel for derived symbols.
Simplify the flatten code by copying the parent and updating the lesser
information from the inherited symbol.
This change completely removes the LIB_ALIAS design pattern an replaces
it by allowing LIB_PART objects to inherit from other LIB_PART objects.
The initial implementation only allows for single inheritance and only
supports the mandatory fields in the derived part because that is all
that the current symbol library file format will support. Once the new
file format is implemented and saving to the old file format is deprecated,
more complex inheritance will be added. The LIB_ALIAS information saved
in the document files was move into the LIB_PART object. This change
impacts virtually every part of the schematic and symbol library editor
code so this commit message is woefully incomplete.
REMOVE: Removed the symbol aliases concept from the schematic and symbol
editors and the symbol viewer.
NEW: Replace the symbol alias concept with simple inheritance that allows
a library symbol to be derived from another library symbol.
When dragging a bus the entry is connected to the bus so the wire
connected to the entry (if any) needs to stretch.
While an entry can connect in the middle of bus, it cannot connect
in the middle of a wire.
Fixes: lp:1849973
* https://bugs.launchpad.net/kicad/+bug/1849973
Copy/Paste should keep the original items' designation for all units and
conversion type. If it was specified in the original copy, we should
keep the same specification when pasting (but update for the current
frame)
The new connectivity algorithm had a tendency to cleanup
globally, but that could insert undo records from other sheets
into the current screen's undo stack. Needless to say, this
was a recipie for segfaults.
Fixes: lp:1846247
* https://bugs.launchpad.net/kicad/+bug/1846247
Right click is a pointing operation combined with a request for the
context menu. We need to highlight the user's intended object when they
have moved their mouse to a new element instead of showing the context
menu for the selected object.
However, in cases where the selection is difficult to make, it is
sometimes helpful to select the item first, then right-click. In these
cases, we keep the selection where the mouse remains inside the selected
object's bounding box.
When placing a new component in the schematic, this allows the user to
iterate through all units in the selected component without re-opening
the choose part dialog. It also allows the optional addition of
multiple copies of the same component to be placed in the schematic.
Fixes: lp:1806217
* https://bugs.launchpad.net/kicad/+bug/1806217
Adding a field to a selection changes the bounding box and count for
rotation. This can cause odd offsets when the field is rotated against
the selection center rather than the bounding box as well as with the
component.
Fixes: lp:1849078
* https://bugs.launchpad.net/kicad/+bug/1849078
The break wire command will break all wires at a point. If there are
multiple crossing wires, we need to check to see if a junction might be
required to reflect the new connection.
Fixes: lp:1848450
* https://bugs.launchpad.net/kicad/+bug/1848450
When we add enough SHEET_PINs that the vector has to grow, it
re-allocates the vector causing our for-loop to get its knickers
tied in a knot.
Fixes: lp:1842394
* https://bugs.launchpad.net/kicad/+bug/1842394
1) When sheet pins are on 3 or more sides there's no point in switching
the orientation to vertical.
2) Careful that we don't cause the sheet to walk when rotating and the
sheet-name or file-name is longer than the side it's on.
Fixes: lp:1841714
* https://bugs.launchpad.net/kicad/+bug/1841714
Also, if it can't be loaded then at least initialize it so that we
don't crash later (trying to access a NULL screen).
Fixes: lp:1841801
* https://bugs.launchpad.net/kicad/+bug/1841801
Saving individual parts of a schematic can break the schematic. This
moves the schematic save option to save all sheets rather than just the
current sheet.
Fixes: lp:1840383
* https://bugs.launchpad.net/kicad/+bug/1840383
They're now used for bus definition control characters.
Also fixes the sheet pin edit dialog to correctly escape/unescape
netnames.
Fixes: lp:1840834
* https://bugs.launchpad.net/kicad/+bug/1840834
1) don't ASSERT; use exceptions (which can be caught) instead.
2) clean up LIB_LOGGER so it's only used during sync
3) fix typos in wxLogMessage() calls so they produce output.
4) throw on unrecognized token in loadContent().
5) if clipboard can't be pasted as content then paste as text.
Fixes: lp:1840172
* https://bugs.launchpad.net/kicad/+bug/1840172
1) Add highlighting to simProbe and simTune tools.
2) Probe tool should accept wires and pins, not wires and components.
3) Give simulator window a flat look to match rest of Kicad.
4) Collapse whitespace out of simulator window.
5) Add some error messages.
6) Add some whitespace to simulation setting dialog.
When selecting items where the reference point is off-screen, GTK
would default the cursor to jump to the bottom of the screen.
Fixes: lp:1838843
* https://bugs.launchpad.net/kicad/+bug/1838843
The problem is that wxEVT_CHAR_HOOK doesn’t do the key translation
properly. wxEVT_CHAR does, but we only get to that if we skip the
event at the end of the tool’s event processing loop, which most tools
don’t do. (Selection tools, point editors, pickers, and a couple of
others do skip, which is probably why this didn’t get reported earlier.)
I played around with a couple of ways to fix wxEVT_CHAR_HOOK. Most of
them don’t work, and the few egregious hacks I tried weren't cross-
platform.
So I’m changing it so that most tools now skip at the end of their
event loops. I left out a couple that I felt were high risk (length
tuning, for instance). But there’s still enough risk that I’m 100%
sure it will break something, I just haven’t a clue what.
Fixes: lp:1836903
* https://bugs.launchpad.net/kicad/+bug/1836903
The point editor expects rectangles with a height and width > 0.
Previously, this constraint did not exist,
so some LIB_RECTANGLE graphic items can create issues when trying to move a corner.
Now, the LIB_RECTANGLE graphic item is normalized before trying to move a corner.
Because the pickers are called with an Activate()/Wait() pair, any
usurping tool gets in between the picker handling the cancel (due
to activation) and the picker client doing a PopTool(). The new
tool is therefore pushed before the old tool is popped.
Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907
This is based on the notion that in Kicad the start and end-points
are far more important (as they usually connect to other segments)
than the center is.
Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.
Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
This adds the functionality to add multiple labels to your schematic at
once by using spaces in the original label name.
Fixes: lp:1095113
* https://bugs.launchpad.net/kicad/+bug/1095113
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
If a tool called something like clearSelection while processing a
MOUSE_CLICK, the SELECTION_TOOL will pass the clearSelection
COMMAND_EVENT because it handles it as a transition, not as an
event. Because m_passEvent is effectively global, the tool manager
would then interpret that as passing the MOUSE_CLICK and we'd end
up processing the click by multiple tools.
There are a whole bunch of cases which all have to work:
regular move
move followed by drag
drag followed by move
move followed by duplicate
duplicate
paste
and all both with and without Warp Mouse on Move checked.
Also fixes the post-duplicate move to start at the cursor pos.
Also fixes the fact that duplicate wasn't getting its hotkey.
Fixes: lp:1830596
* https://bugs.launchpad.net/kicad/+bug/1830596
If you construct wxTimer statically, it will be constructed
before WX init, which means you might get assertions about
missing m_impl's within the timer class.
The solution is to construct the wxTimer at run time. In this
case, static within the function will be constructed only after
the function is called (and actually the scope only needed to be
this function anyway).
jean-pierre charras
Alexander Shuklin
Seth Hillbrand
Jon Evans
Mark Roszko
Ian McInerney
Jeff Young
Franck Jullien
Wayne Stambaugh
Seth Hillbrand
Michael Kavanagh
Maciej Suminski
John Beard
Tomasz Włostowski