64eaaa4f58
Fix incorrect parent of a separator in a toolbar
2018-08-10 11:53:49 +02:00
6fbc7bb4ce
Gerbview, read Excellon files: fix a few issues.
...
The main issue is the fact Excellon files have no coordinate fine format definition.
Only the units are defined.
Units are floating point numbers or integer numbers.
Integer numbers can be defined as 3.3 or 2.4 numbers (mm/inches)
However some files (altium drill files for instance) use an other notation.
This fix is a workaround to accept 2.x (inch) or 3.x (mm) notations.
Fixes: lp:1754121
https://bugs.launchpad.net/kicad/+bug/1754121
Fixes: lp:1782053
https://bugs.launchpad.net/kicad/+bug/1782053
2018-07-17 17:41:33 +02:00
3af2026061
Revert "Perform coordinate format detection on Excellon drill files"
...
This reverts commit 3e033aee0c
2018-07-17 17:41:32 +02:00
9f7109826d
fix misspelled 'allows to' -> 'allows one to'
...
Fixup small grammar issues around used 'allows to ...' almost in
code comments.
2018-07-11 10:35:03 -04:00
ef38a198d1
GerbView: incorrect handling of polygon primitive: broken parameters rotation and drill size.
...
Fixes: lp:1778459
https://bugs.launchpad.net/kicad/+bug/1778459
2018-06-25 11:00:53 +02:00
e4a6f2e523
Switch canvas to Cairo if OpenGL is not supported on the first run
2018-06-04 12:17:58 +02:00
27c9c6ceed
Enable the accelerated canvas on the first gerbview run if requested
...
Commit 8910894f
2018-06-04 10:47:44 +02:00
8f984c2899
OpenGL, DrawGrid(): use grid and axis alpha color value setting, instead of the fixed 1.0
...
In Cairo mode, this function uses already the alpha color value setting.
Now for low alpha values (usually they are low, as said in many GAL comments),
Cairo mode and OpenGL mode should have a similar look.
2018-06-01 18:29:04 +02:00
bfa89039c4
Gerbview, GAL mode: fix "Zoom to fit" area size calculation when nothing is loaded.
...
Also ensure the worksheet is displayed after clearing the gerber layers.
2018-06-01 11:39:08 +02:00
9a228d8ec9
Gerbview: GAL mode: shows the page worksheet, similar to legacy mode.
2018-06-01 09:11:43 +02:00
fc71fc6474
Gerbview: Fit to page: use the page size when nothing is loaded.
...
Previously, due to a minor bug, a very small default size was used (therefore a high zoom value), that was not a good choice.
2018-05-31 11:22:33 +02:00
cd5f727880
Fix off-by-1 errors in zoom menus & use zoom steps in GAL canvas.
...
Also bumps the maximums a bit (at user request).
Fixes: lp:1773215
* https://bugs.launchpad.net/kicad/+bug/1773215
2018-05-25 13:01:58 +01:00
81af2db614
Even out the Gerbveiw zoom steps and increase the max.
...
Fixes: lp:1773215
* https://bugs.launchpad.net/kicad/+bug/1773215
2018-05-24 19:04:10 +01:00
8506cdf3ae
Avoid numerical dereference of selections
...
The SELECTION is a std::set. Numerical dereference of item n is O(n) as
the iterator is not random access. Therefore, a for loop using
numerical dereference is O(n!) and quickly slows.
We avoid this by storing items to remove separately while iterating and
then removing the items after we complete.
Fixes: lp:1692081
* https://bugs.launchpad.net/kicad/+bug/1692081
2018-05-22 16:37:45 -07:00
8c5037a48b
Optionally sort reporter messages
...
It can be useful to have similar class messages grouped together so that
error messages in a larger report don't get lost among the
warning/info/action messages.
This patch allows sorting of messages for dialogs that benefit from
organization. Default behavior of reporter messages remains
unchanged by this patch.
Fixes: lp:1772090
* https://bugs.launchpad.net/kicad/+bug/1772090
2018-05-22 13:55:02 -07:00
5010a461e1
Make polar coordinates consistent.
...
Use theta instead of phi (which normally describes the azimuth
angle).
Fixes: lp:1545107
* https://bugs.launchpad.net/kicad/+bug/1545107
2018-05-18 12:22:14 +01:00
7c52af2d50
Gerbview: cosmetic enhancement: add icons in Clarify menu.
2018-05-17 10:24:09 +02:00
93e75af388
Rename plot_auxiliary_data.h file to gbr_metadata.h, according to the class names defined by this file
2018-05-17 08:07:29 +02:00
d8687e4eaf
Gerbview: minor code cleanup
2018-05-14 09:05:11 +02:00
8da242c593
Gerbview: accept any structured comment as X2 attribute.
...
A structured comment is a comment line starting by "G04 #@! " and in fact containing
a X2 attribute. It is used to create Gerber files contianing X2 metadata, but compatible
with X1 file format
2018-05-14 09:05:09 +02:00
a3770bf6e1
Gerbview: fix a crash when Gerbview starts by loading a gerber job file (run from a command line)
2018-05-07 12:47:11 +02:00
106dd60e45
Only adjust LAYER_WIDGET font size if larger than indicator.
...
Also moves adjustment into LAYER_WIDGET so all the callers don't
have to deal with it individually.
Fixes: lp:1767965
* https://bugs.launchpad.net/kicad/+bug/1767965
2018-05-02 21:49:57 +01:00
f911ef5186
Standardize print scale label for gerbview
2018-04-23 13:14:06 -07:00
ca06e67ffc
Standardize colons in gerbview display options dialog
2018-04-23 13:11:53 -07:00
aa0d67bdde
Standardize colons in gerbview print dialog
2018-04-23 13:10:53 -07:00
2925b93571
Gerbview: Remove dead code that handled a experimental .gbrjob file, now no longer existing.
2018-04-23 13:04:21 +02:00
cfa9916836
Prevent issuing a print command before the previous one is finished
...
Fixes: lp:1765965
* https://bugs.launchpad.net/kicad/+bug/1765965
2018-04-23 11:25:28 +02:00
3cc0554e33
Code formatting
2018-04-23 11:18:51 +02:00
07dc12fdd3
Fix incorrect UI management of Zoom to Selection, created by fix 2a419156
2018-04-14 17:44:17 +02:00
e9ef555c6a
Use Ctrl+F1 to display hotkey list also in Gerbview and Kicad manager
2018-04-14 17:12:28 +02:00
2a419156e0
Don't try to check uncheckable menu items.
...
When updating toolbars make sure the events are coming from the
toolbar in question (and not the menus which share the same ID).
Fixes: lp:1763563
* https://bugs.launchpad.net/kicad/+bug/1763563
2018-04-13 21:42:31 +01:00
df8bc93e4b
gerbview: Removed duplicate zoom-to-selection handler, made the toolbar button checkable
...
Fixes: lp:1763270
* https://bugs.launchpad.net/kicad/+bug/1763270
2018-04-12 11:52:08 +02:00
a11714b1a4
fix misspelled 'an other' -> 'another'
2018-04-08 13:24:37 -04:00
baef22df9a
Fix memory leak and push menu change to other apps.
...
Fixes: lp:1761848
* https://bugs.launchpad.net/kicad/+bug/1761848
2018-04-07 14:14:55 +01:00
a2f118d2fa
Gerbview: fix not working menu item "Zoom to Selection" in main menu. This also fixes a wxASSERT for this menu item
2018-04-03 16:30:16 +02:00
f8a3ec4974
Add a method to facilitate Tools handling in main frame toolbars.
...
Fix also a bug in gerbview_frame.cpp, about a broken toolbar accessor (fortunately not used in current code)
2018-04-03 13:00:20 +02:00
54f14b08ca
commit forgotten change in my previous commit
2018-03-31 18:46:29 +02:00
fa39acfc2f
Gerbview, export to pcbnew : export polygons as new DRAWSEGMENT polygonal shape.
...
It can creates issues on copper layers, but the only one other alternative is to ignore polygons in export,
and this is worst.
2018-03-31 18:43:12 +02:00
5b8c35f64d
Gerbview: minor fix: do not report error if in header INCH ot METRIC command has no parameter (,LZ or ,TZ format)
...
I am not sure it should be reported, because LZ or TZ format has no meaning in decimal format, and can be omitted.
2018-03-31 18:40:29 +02:00
1ec217d70e
Fix hit testing for zero-width gerber items
2018-03-29 22:04:51 -04:00
8d8c422a19
Add zoom to selection menu entry to all editors.
...
Fixes lp:1753339
https://bugs.launchpad.net/kicad/+bug/1753339
2018-03-25 12:34:19 -04:00
29ebca4053
Very minor fix: make a menu string more easily translatable
2018-03-22 21:00:41 +01:00
5b653c0c1e
Update MacOS icons
...
Fixes: lp:1750284
* https://bugs.launchpad.net/kicad/+bug/1750284
2018-03-22 11:45:42 -04:00
a931ac436a
Add some safety checks to Excellon number format detection
...
Fixes: lp:1754121
* https://bugs.launchpad.net/kicad/+bug/1754121
2018-03-21 22:29:43 -04:00
2ff74cb3fc
Add support for .gbrjob new file format (JSON format) in Gerbview
...
Add experimental code to generate .gbrjob files in the new JSON file format
2018-03-19 15:14:20 +01:00
5e34563f52
Fix a long calculation time that happens with some gerber files when closing Gerbview in legacy display mode.
2018-03-19 10:58:27 +01:00
4e76a18d5d
Add checks against missing D-Codes in flashed Gerber items
...
Fixes: lp:1756710
* https://bugs.launchpad.net/kicad/+bug/1756710
2018-03-18 21:55:27 -04:00
827b818b5d
Very minor fixes in Gerbview and Kicad:
...
Gerbview: fix X2 z order display of Adhesive (Glue) layers.
Kicad: very minor cosmetic enhancement in Create Project dialog.
2018-03-18 16:04:23 +01:00
9e8bcbea04
Gerbview: fix typo in tooltip string.
2018-03-16 09:41:53 -04:00
213b600b54
Revert active layer behavior so gerber/drill load behavior matches
...
Fixes: lp:1755713
* https://bugs.launchpad.net/kicad/+bug/1755713
2018-03-14 21:52:06 -04:00
jean-pierre charras
Carsten Schoenert
Maciej Suminski
Jeff Young
Seth Hillbrand
Jon Evans
Wayne Stambaugh
Marco Ciampa