d391489596
Don't clear old footprint till after user has hit OK.
...
Fixes: lp:1759190
* https://bugs.launchpad.net/kicad/+bug/1759190
2018-04-02 22:32:09 +01:00
f4c972db5e
Name the Get and Move Footprint dialog to match the command.
...
Fixes: lp:1760635
* https://bugs.launchpad.net/kicad/+bug/1760635
2018-04-02 20:16:26 +01:00
89381e1103
Eagle Import: Correct layer set based on cream setting and rotate rectangles
...
Fixes: lp:1758747
* https://bugs.launchpad.net/kicad/+bug/1758747
2018-04-02 10:59:54 -07:00
ee05b1c92e
Add polygon arc support to Eagle import
2018-04-02 10:49:43 -07:00
532bf09817
Don't save broken polygon
...
If a polygon has fewer than 3 points, it is invalid. We need to
register this as failure, otherwise we save the formatting/closing
s-expr for the polygon without the actual polygon points. This breaks
the footprint and board.
2018-04-02 10:18:10 -07:00
62c5a706d5
DIALOG_GRAPHIC_ITEM_PROPERTIES: fix a not very understandable error message (especially when Dwgs.User layer is disabled).
...
Rename the method PCB_LAYER_BOX_SELECTOR::SetLayerSet to the better name SetNotAllowedLayerSet
2018-03-31 10:46:52 +02:00
7d3d9f7188
Wrapping left-over debug printf() in DBG()
2018-03-30 16:17:29 -07:00
4917540069
Clarify timestamp type for wxDateTime
2018-03-29 09:29:05 -07:00
0f0d9afa66
Pcbnew, legacy mode: fix ratsnest display artifacts when finishing or removing a track
2018-03-29 09:28:41 +02:00
d1ab62fb4d
pcbnew: Save only edited footprint when saving
...
Don't re-save all files in a library when editing a single footprint.
This creates issues with formatting in version control systems where
unmodified files are re-written without being explicitly changed by the
user.
Fixes: lp:1752991
* https://bugs.launchpad.net/kicad/+bug/1752991
2018-03-28 14:42:32 -07:00
6740a37632
move and swap layers: make changes undoable.
...
minor code cleanup.
2018-03-28 15:30:11 +02:00
6a4d14bade
Fix cosmetic issues in dialog. Use move instead of swap in dialog, to avoid mistakes, as the dialog allows moving objects between layers, and do not really swap layers.
2018-03-28 12:45:54 +02:00
ffa454d6f9
class MODULE: use timestamp_t instead of time_t in SetLastEditTime and GetLastEditTime, like in all other methods using a time stamp.
2018-03-27 20:43:52 +02:00
2edc675eaf
DIALOG_LAYERS_SETUP: force 4 non copper layers to be always in use.
...
edge cut, courtyard and margin layers are (or can be) used in DRC.
So they are seen as mandatory, and the dialog always force them active.
2018-03-27 20:26:48 +02:00
78161b5922
Layers setup management: Warn user if some removed layers are in use in footprints loaded on the board.
...
Fix also memory leak and missing connectivity rebuild.
2018-03-27 13:44:59 +02:00
602d9e1972
Fix a missing init in gerber plot script demo.
...
Fixes: lp:1759071
https://bugs.launchpad.net/kicad/+bug/1759071
2018-03-27 13:42:51 +02:00
0ded476f9d
Add a hotkey to control net highlighting
...
Fixes: lp:1757446
* https://bugs.launchpad.net/kicad/+bug/1757446
2018-03-26 23:09:44 -04:00
9472444b41
Fix minor rounding error in curved wire import
2018-03-26 15:18:47 -07:00
ced0fcee1e
Updating Eagle Importer to take curved zones
...
Fixes: lp:1755879
* https://bugs.launchpad.net/kicad/+bug/1755879
2018-03-26 15:09:56 -07:00
886dc48cc4
Point Editor: reset the pointer to the modified point as it becomes invalid
...
Fixes: lp:1759024
* https://bugs.launchpad.net/kicad/+bug/1759024
2018-03-27 00:03:48 +02:00
778a3a4777
Count pins instead of using netcount as a proxy.
...
Fixes: lp:1703155
* https://bugs.launchpad.net/kicad/+bug/1703155
2018-03-26 19:57:08 +01:00
ca4e4aead4
router: don't push vias if push force is zero
...
Fixes: lp:1758540
* https://bugs.launchpad.net/kicad/+bug/1758540
2018-03-26 20:13:32 +02:00
347f6daddc
Eagle Converter: Adjust arcs to use error-based alg
...
Implements the revised, difference-error based algorithm in the Eagle
arc import rather than using the hard-coded 32-segments/360°
2018-03-26 10:39:23 -07:00
a8b1c2a8f2
Change dimension style to improve display and be more standard
2018-03-25 21:50:57 -04:00
c8c5b5da07
Fix zoom to selection in bug in gal canvas.
2018-03-25 16:12:56 -04:00
a763435b59
Change zone segment count to high/low res.
2018-03-25 20:20:51 +01:00
f4ce8766e3
Implement shared FOOTPRINT_LIST.
...
While we already cache the loaded footprint files, parsing said files
into the list is also time-intensive. Since the FOOTPRINT_LIST is
already hash-stamped against the current timestamps of the files that
make up the list, sharing a single copy of the list is quite
straight-forward.
2018-03-25 19:21:28 +01:00
8d8c422a19
Add zoom to selection menu entry to all editors.
...
Fixes lp:1753339
https://bugs.launchpad.net/kicad/+bug/1753339
2018-03-25 12:34:19 -04:00
6b51cc33da
Set appropriate parent for 3D library downloader progress dialog
...
Fixes: lp:1758095
* https://bugs.launchpad.net/kicad/+bug/1758095
2018-03-24 21:08:35 -04:00
4b5ca0ec14
Drawing tool: prevent creating zero-length lines
...
Fixes: lp:1758570
* https://bugs.launchpad.net/kicad/+bug/1758570
2018-03-24 23:57:06 +01:00
97fffe875f
Notify clients when GRID_TRICKS toggles checkboxes.
2018-03-24 13:13:57 +00:00
f317b10adf
Ensure that the current copper zone is not first
...
The zeroth index is reserved especially for the <no net> tag, so we need
to keep the current net at 1 or greater to keep it connected.
Fixes: lp:1758488
* https://bugs.launchpad.net/kicad/+bug/1758488
2018-03-23 20:38:47 -07:00
fb882633b2
Save layers regardless of view
...
We do not modify the underlying board when saving. Previously only the
visible layers were saved. This created a discrepancy between the board
that the user was editing and the board that was saved to disk.
Fixes: lp:1754049
* https://bugs.launchpad.net/kicad/+bug/1754049
2018-03-23 09:32:56 -07:00
fbf10e941b
Switch zone fillets to absolute-error algorithm.
...
And some general cleanup to related constants, etc.
2018-03-23 12:46:17 +00:00
d2d0660647
Open viewer even when FPID is invalid.
...
Just show an empty viewer.
2018-03-23 12:46:17 +00:00
a0364a1137
Don't make user click twice to toggle checkbox in wxGrid.
2018-03-23 12:46:17 +00:00
5b653c0c1e
Update MacOS icons
...
Fixes: lp:1750284
* https://bugs.launchpad.net/kicad/+bug/1750284
2018-03-22 11:45:42 -04:00
94c780975e
Very minor cosmetic fix.
2018-03-22 12:01:06 +01:00
62fd734007
Footprint Viewer: do not try to preselect an empty footprint
...
Empty string is treated as an invalid LIB_ID, so it ends up with an
exception.
2018-03-22 11:38:10 +01:00
4152069504
Make vias selectable even if top and bottom layer are hidden
2018-03-21 22:15:17 -04:00
79fe134495
Init Footprint Viewer with current FPID.
...
Fixes: lp:1757421
* https://bugs.launchpad.net/kicad/+bug/1757421
2018-03-21 23:11:55 +00:00
99e659ff54
Coverity fixes.
2018-03-21 23:11:55 +00:00
ff3f229871
Decouple vias from tracks in selection filter
2018-03-21 17:21:08 -04:00
ea3f8743fd
Fixes in GAL selection filter:
...
- vias were always left selected, include vias in tracks filter - as in legacy
- make text filtering work
- cleanup drawings filtering code
- hide checkbox "Include items on invisible layers" because it does not work in GAL
2018-03-21 17:21:01 -04:00
7b4a8d7eb5
Gerber job file: update file format due to a recent change.
...
Please: note the gerber JSON file format is currently a moving target, although most of the format is now fixed.
Most, but not all.
2018-03-21 12:40:10 +01:00
285bf79370
Fix strings for save/load project menu options; standardize on "Load"
...
Fixes: lp:1753659
* https://bugs.launchpad.net/kicad/+bug/1753659
2018-03-20 22:20:54 -04:00
b9ce203487
Fix pad selection requirements in footprint editor
...
Fixes: lp:1757295
* https://bugs.launchpad.net/kicad/+bug/1757295
2018-03-20 21:15:05 -04:00
b53ed148f3
Optimization to track DRC and some formatting cleanup
2018-03-20 20:37:35 -04:00
c78171d01f
DRC: Add an optional mode to report all track errors
...
Fixes: lp:1754442
* https://bugs.launchpad.net/kicad/+bug/1754442
2018-03-20 19:54:06 -04:00
73408f3f21
Correct DRC calculation on segments
...
If objects are at the clearance limit, they qualify as passing DRC.
Therefore, all comparison functions that indicate failure should be
strictly greater than or less than while all comparison functions that
indicate success (in the DRC) should be greater/equal or less/equal.
This also corrects a rounding error at the nm scale and handles
scaling zero-length and large segments correctly.
Fixes: lp:1756403
* https://bugs.launchpad.net/kicad/+bug/1756403
Fixes: lp:1593373
* https://bugs.launchpad.net/kicad/+bug/1593373
2018-03-20 15:35:53 -07:00
Jeff Young
Russell Oliver
Seth Hillbrand
jean-pierre charras
Jon Evans
Maciej Suminski
Tomasz Włostowski
Wayne Stambaugh
Andrzej Wolski