* Push a function into CONDITIONAL_MENU that adds the item
* Modify the tooltip for close and exit items to have the
program name
Fixes: lp:1835454
* https://bugs.launchpad.net/kicad/+bug/1835454
Our coroutine system can make debugging memory issues harder by not
following a standard stack allocation system. We can get around this by
using valgrind's built-in stack instrumentation. Each coroutine
registers a stack allocation allowing memcheck to recognize when
accesses are bounded.
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
If a tool called something like clearSelection while processing a
MOUSE_CLICK, the SELECTION_TOOL will pass the clearSelection
COMMAND_EVENT because it handles it as a transition, not as an
event. Because m_passEvent is effectively global, the tool manager
would then interpret that as passing the MOUSE_CLICK and we'd end
up processing the click by multiple tools.
Delete the copy ctor and assignment operator to start with, but
even then the separate apps each have their own statically allocated
copy of the common actions. So we need to update all of them, which
also means having the kicad manager frame's set of actions on hand).
This changelist also adds a Clear Hotkey Assignment function since
the hotkeys set is now likely to be sparse with respect to the
actions.
It was confusing that the primary frames registered their tools
differently than the other frames. In addition, since the other
frames also added their own tools, foo_actions::RegisterAllTools()
didn't really register all tool but rather those used by the
principal frame (PCB_EDIT_FRAME, SCH_EDIT_FRAME, etc.)
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
Many operations on the selection involved getting an item by index or
dereference. The std::set needed to iterate from the beginning of the
set to find the item in its red-black tree. Using a deque that we keep
sorted, we get index access in O(1) and item search in O(lg N).
Getting the position of a non-position TOOL_EVENT will
now result in a wxCHECK, and a null-position (0,0) will
be returned. The new interface HasPosition() can be used
to determine if a call to a position function is safe to
make from the caller.
Fixes the underlying danger behind lp:1796045, which has
already been neutralised by a4966adb6, which avoids calling
the Position() functions when the TOOL_EVENT is not known
to be a position.
Fixes: lp:1796045
* https://bugs.launchpad.net/kicad/+bug/1796045
Put the cursor and pan control TOOL_ACTIONs in ACTION,
and refer to them in that way.
The handlers are currently identical in Pcbnew and Cvpcb,
and Gerbview (and all canvases) can benefit from them as well
if they are in libcommon. Also saves duplicated code.
Fixes: lp:1795855
* https://bugs.launchpad.net/kicad/+bug/1795855
Add Display Settings to Footprint Browser.
Make each of them OpenGL on OSX and Cairo on other platforms.
Allow auto-zoom to be turned off and save last zoom setting.
Make ordering of tools in htoolbar consistent.
Standardize grid and zoom drop-downs.
Fixes: lp:1791667
* https://bugs.launchpad.net/kicad/+bug/1791667
This not only reduces the number of different mechanisms, but
will also reduce (yet again) the number of Clarify Selection
pop-ups (because the CLIENT_SELECTION_FILTER runs before the
pop-up, while SanitizePads ran after it).
Fixes: lp:1710451
* https://bugs.launchpad.net/kicad/+bug/1710451
(cherry picked from commit e50a993)
All calls to {save,apply}ViewControls() have been replaced with a new
method: setActiveState(). The advantage is that setActiveState() always
saves view controls settings to the tool that set them. As long
as setActiveState() is called every time there is a tool context
switch, the changes are kept up-to-date.
Fixes: lp:1748613
* https://bugs.launchpad.net/kicad/+bug/1748613
Second disambiguation menu was caused by another call to
SELECTION_TOOL::RequestSelection() meant to get the list of
connected tracks. When there were only footprints under the cursor,
it asked the user again to pick an item to remove.
Fixes: lp:1748521
* https://bugs.launchpad.net/kicad/+bug/1748521
Launching right click context menu overrides the cursor position, so all
actions executed by the tools will be performed in the right click
position. It created an issue, as the overridden cursor settings were
saved into wrong context if there was another tool activated in the
meantime.
Current implementation saves cursor settings for all tools and restores
them once the right click context menu disappears.
Fixes: lp:1745981
* https://bugs.launchpad.net/kicad/+bug/1745981
Fixes: lp:1746507
* https://bugs.launchpad.net/kicad/+bug/1746507
It fixes the case when a tool sets up a menu and starts its event loop
waiting exclusively for menu events. If none arrived, the tool was stuck
in the loop forever.
Fixes: lp:1744915
* https://bugs.launchpad.net/kicad/+bug/1744915
Opening Properties dialog normally does not ask the user to confirm the
action, even for locked items. The exception was a case when there was
nothing selected and Properties dialog was invoked via its hot key -
then SELECTION_TOOL::RequestSelection() tried to get the item under the
cursor, verifying the lock flag.
Fixes: lp:1734537
* https://bugs.launchpad.net/kicad/+bug/1734537
- added selection of reference point
- added snapping when pasting
- some minor code refactoring
- disabled pasting between footprint and pcb editors due to model incompatibility
- support for background color setting
- removed several global config settings (such as g_Drc_On)
- wrapped most of global config settings in PCB_GENERAL_SETTINGS class
- reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
- new GAL feature for legacy users: double-click (or E) to change track width available as an option.
Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543
Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
- added TOOL_INTERACTIVE::resetTransitions()
- made protected and moved TOOL_BASE::setTransitions() to TOOL_INTERACTIVE
- TOOL_MANAGER calls TOOL_INTERACTIVE::resetTransitions() instead of
setTransitions()
This patch adds a radiobox to allow the user to select a reference point for
the move. The additional options are: User Origin (set with <space>),
Grid Origin and Sheet Origin (effectively making it an absolute coordinate).
A checkbox is added (where it makes sense) to allow overriding which point
within the component is put on top of the designated coordinate.
Fixes: lp:1460460
* https://bugs.launchpad.net/kicad/+bug/1460460
A new items is added to the GAL display options (and the dialog), and a
hotkey (Ctrl+Shift+x) is added to toggle it.
Fixes: lp:1673633
* https://bugs.launchpad.net/kicad/+bug/1673633
This is the right implementation of the commit b25ded4d.
Previously if there were tools launched from another tool,
the settings could be stored in a wrong TOOL_STATE object.
- The tools can now specify if the items in the selection must be editable/
deletable. This is groundwork to be able to select/delete DRC markers, which can't
otherwise be edited.
- Fixed disappearing of selected objects
BOARD::GetBoundingBox() now directly calls BOARD::ComputeBoundingBox()
and there is a new method BOARD::GetBoardEdgesBoundingBox() used for
call sites that needed to use ComputeBoundingBox( true ) in the past.
This allows COMMON_TOOLS to implement ZoomFitScreen without knowledge
of the BOARD class.
Adds a similar crossprobe as modules has in pcbnew. When clicking a
sheet in eeschema, the items that are exclusive in that scheet will be
selected in pcbnew if using the GAL canvas.
There are times, when TOOL_MANAGER has to force cursor position
to make tools work as expected (e.g. when popping up a menu,
so tools get the right click position instead of current position
pointing to an entry in the menu).
If another tool is invoked, VIEW_CONTROLS settings have to be stored
in the TOOL_STATE object. In such case, it is necessary to revert the
force cursor setting when saving VIEW_CONTROLS settings.
Fixes: lp:1668712
* https://bugs.launchpad.net/kicad/+bug/1668712
SELECTION now holds EDA_ITEMs not BOARD_ITEMs so various places had to
change to casting the selected items to BOARD_ITEMs.
Fixed compilation warnings on clang (Tom)
dispatchContextMenu() stores the cursor position before displaying a
menu, so the tools use the original cursor position when processing
events (instead of the mouse position pointing to a menu entry). Later,
the previous position has to be restored, but if in the meantime the
tool was cancelled - previous settings were restored to a wrong tool.
This is used to provide menu entries that allows cancellation of
interactive drawing and routing tools without needing the keyboard.
It is provided in the drawing tools and the router tool.
The cancel event doesn't have any new functionality (e.g. track rip-up
for the PNS router - lp:1448460), this just adds it to the menu, where
it behaves the same as an Escape keypress.
Some grid/zoom tools are left in PCBNEW_CONTROL because they currently
depend on Pcbnew-specific class members. Once refactoring is done to
make it possible to use all zoom and grid controls outside of pcbnew,
these last tools can be moved to common to match their ACTIONs.
New virtual class ACTIONS is added as a member to EDA_DRAW_FRAME so
that the TOOL_DISPATCHER can have access to the appropriate derived
version of TranslateLegacyId()
The apply settings and push settings options now take account of the
validity of the global pad settings when deciding whether to show or
not.
Global pad push now requires a source pad and doesn't push from the
global pad setting when there is no selection.
The whole submenu is hidden when there are no enabled items.
Fixes: lp:1664016
* https://bugs.launchpad.net/kicad/+bug/1664016