GAL is strict regarding which layers are rendered, therefore to show
ratsnest lines when an item is dragged - the ratsnest layer must be kept
enabled. Ratsnest line visibility is enabled per item and this is the
way to show/hide the lines.
Fixes: lp:1666473
* https://bugs.launchpad.net/kicad/+bug/1666473
Minimum differential pair clearance should be limited to the netclass
differential pair spacing. This also cleans up some unused code that
was left over from previous work on differential pair clearances.
Fixes: lp:1673632
* https://bugs.launchpad.net/kicad/+bug/1673632
In case there are zero width oval holes on the PCB,
it is safer to not plot them at all, rather than plotting
with width arbitrarily increased to 10 mils.
This also makes Gerber outputs consistent with Excellon outputs.
When removing items, we perform a two-pass removal, checking first
for the cached rectangle collision. Then, if we do not find the item
being removed, we perform a second, more expensive pass over the full
tree. This second pass is required as we cannot be certain that an
item's bbox has not been modified between insertion and deletion. In
which case, keeping stale pointers in the tree will lead to segfaults.
Fixes: lp:1777246
* https://bugs.launchpad.net/kicad/+bug/1777246
The dialog was displayed due to a global TOOL_ACTION and a hotkey
assigned to a top menubar entry. Removing the hotkey from the menubar entry
is not ideal, but less irritating than a dialog showing up twice.
The assert in the title line verifies that an item does not belong to
any DLIST when it is being added to one. Items in clipboard are already
owned by DLISTs, therefore they need to be removed from the original
DLISTs before being added to new ones.
Commit 72b49acc changed behavior of MODULE::ViewBBox(),
which now includes text fields area. This caused problems
with selecting footprints with relatively large text fields.
This patch fixes this problem by using MODULE::GetBoundingBox instead.
Fixes: lp:1776942
* https://bugs.launchpad.net/kicad/+bug/1776942
After an action is completed that required the screen to pan when the
cursor reaches the edge of the screen, we should release the cursor to
allow the user to move their mouse without panning.
Fixes: lp:1763860
* https://bugs.launchpad.net/kicad/+bug/1763860
There's no risk in measuring an empty footprint but there's no benefit
either. This matches the measure tool to the other, deactivated
footprint tools.
- Ordering of Hotkey list by function
- Use Hotkey assignment instead of hard-coded hotkey for length tuning
- Adjust default Length Tuning settings hotkey to CTRL-L so that we
don't overlap with "Lock" (overlaps are not editable)
Once SELECTION_TOOL has been changed to use EDA_ITEM::GetBoundingBox(),
selection area had to cover the footprint and its ref/value texts,
even hidden ones. To fix this, ref/val strings are taken into account
only in the ViewBBox().
Change the Doxyfile project name from KiCAD to KiCad. It doesn't look
very good when we don't get the project name capitalization correct.
Clean up trailing whitespace in some of the helper scripts and Doxyfile.
Also sets the initial footprint to the current footprint when
doing a Choose Footprint from the Eeschema Edit Property
dialog.
Fixes: lp:1776126
* https://bugs.launchpad.net/kicad/+bug/1776126
- fixed via bounding box calculation in TRACK::GetBoundingBox()
- moved clearance to TRACK::ViewBBox()
- modified the Selection Tool to use EDA_ITEM::GetBoundingBox() rather
than VIEW_ITEM::ViewBBox() to determine selection
Fixes: lp:1776314
* https://bugs.launchpad.net/kicad/+bug/1776314
It happens if the first segment of the new trace is inside a pad: the other segments are not found.
And the erased trace is not the right trace.
However this fix is more a workaround than a fix: currently the detection of the trace boundaries (BOARD::MarkTrace())
does not work very well for segments inside a pad.
Fixes: lp:1776121
https://bugs.launchpad.net/kicad/+bug/1776121
New items just being placed on the board are still temporary. Although
we can modify their orientations/positions, we can't stage these changes
for undo/redo without corrupting the undo stack.
Fixes: lp:1776312
* https://bugs.launchpad.net/kicad/+bug/1776312
Previously, the "Select Connection" sub-items were greyed out when the
selection contained both tracks and vias. This meant that you couldn't
access "Select Copper Connection" when the selection contained both
tracks and vias (though the keyboard shortcuts did work).
Change to use SELECTION_CONDITIONS::OnlyTypes( GENERAL_COLLECTOR::Tracks
) to allow any combination of track elements to be selected.
Fixes: lp:1772249
* https://bugs.launchpad.net/kicad/+bug/1772249
We can invalidate a node by rotating. Make sure that our endpoints for
the ratsnest are valid before attempting to draw.
Fixes: lp:1775727
* https://bugs.launchpad.net/kicad/+bug/1775727
PNS routing options allow trace width to be chosen by the assigned
netclass. This extends that to differential pair width/gap settings as
well.
Fixes: lp:1672126
* https://bugs.launchpad.net/kicad/+bug/1672126
Processing enter from within the dimension editor window is only set to
the default action for top-level items. Within the sizer, enter is
handled by the first registered button (Cancel) unless explicitly set.
Fixes: lp:1774035
* https://bugs.launchpad.net/kicad/+bug/1774035
When clearing the pcb in footprint editor, we need to transfer the
netclass settings to ensure we have the correct defaults for the new
footprint.
Fixes: lp:1751583
* https://bugs.launchpad.net/kicad/+bug/1751583
There are three related changes here to harden our handling of threads
in the footprint async loader.
1) Footprint async loader explicitly aborts any remaining loader threads
on exit.
2) We protect the thread join by a mutex
3) We do not pause during no-wait routines
Pads count all pads/pins on the board including unconnected and NPTH.
Nodes count only the pads that can connect to a net and are therefore
routable. These were being calculated as the same number (displayed in
the info bar at the bottom of the screen)
Connectivity searches were slow for large, complex boards. This was
partly due to the need to search all lists for possible connections
between anchors.
We remove this requirement by creating an RTree based on items' bounding
boxes similar to the PNS router. Then we get both the colliding items
and search forward/backward to see if there are connections between the
anchors and the other item.
Because we use RTree, we no longer need the maintenance overhead of multiple
item lists and an anchor list in the connectivity class.
Fixes: lp:1701791
* https://bugs.launchpad.net/kicad/+bug/1701791
Fixes: lp:1769408
* https://bugs.launchpad.net/kicad/+bug/1769408
Fixes: lp:1761989
* https://bugs.launchpad.net/kicad/+bug/1761989
It was broken by commit c78171d01f.
During creation, the Drc must only display a error message, and do not create markers.
Markers are created only during a full board DRC test.
commit c78171d01f replaced this behavior by a incorrect one (create markers and do not show error messages)
The progress reporter should not be cleared in the footprint
implementation to prevent dereferencing a NULL.
When cancelling the load, we should only allow setting of cancellation
to true to prevent a condition where the progress reporter resets
the cancellation.
Fixes: lp:1774777
* https://bugs.launchpad.net/kicad/+bug/1774777
Also lock the DeleteAll call with mutext to protect threaded access.
The OpenGL contexts are removed when OPENGL_GAL class is destroyed.
Explicitly deleting all contexts prior to destroying the OPENGL_GAL
class causes an assert when the destructor tries to lock its context
prior to cleaning up OpenGL memory. In most cases, an unhandled assert
in a destructor-called function will simply exit the destructor.
Python thread cleanup will also attempt to close the context. This can
cause a race condition with multiple threads accessing/deleting the
canvas.
Fixes: lp:1774096
* https://bugs.launchpad.net/kicad/+bug/1774096
Colors are assigned to virtual layers while the ToLayer_ID returns a
physical layer enum. The GetLayerColor/SetLayerColor take LAYER_NUM
(int) values that can be larger than the physical layer count.
We were trying to handle aOnlyOneFile at two different levels
which was preventing the Silk layer from going through the
right routine (and preventing board outlines from getting
drawn if selected).
We were also overwriting the references color local variable
before using it, meaning the reference was always rendered in
the value's color.
Fixes: lp:1774171
* https://bugs.launchpad.net/kicad/+bug/1774171
Previously, the dialog was created only once, with the current board setup and the current units selection.
Therefore, after changes in board or units, the dialog was really broken.
Now, the dialog is recreated when the plot command is run.
A perfect solution would create holes in the coverage map
for the zone edges and handles, but that's a lot more
work.
Fixes: lp:1773204
* https://bugs.launchpad.net/kicad/+bug/1773204
As of v5 footprint library reorganization (one repo per library concept
is replaced with a common repo for all libraries), the Footprint Library
Wizard may handle only the old libraries. It has been replaced with
a file browser to select only local files.
Fixes: lp:1772209
* https://bugs.launchpad.net/kicad/+bug/1772209
When starting async processes, we need to have a way to stop the process
before releasing memory. Descoping FOOTPRINT_ASYNC_LOADER while the
threads were still running could cause crashes depending on the memory
structure. To avoid this we define clear procedures for exiting a
running async processes and call these when exiting.
Fixes: lp:1772909
* https://bugs.launchpad.net/kicad/+bug/1772909
The SELECTION is a std::set. Numerical dereference of item n is O(n) as
the iterator is not random access. Therefore, a for loop using
numerical dereference is O(n!) and quickly slows.
We avoid this by storing items to remove separately while iterating and
then removing the items after we complete.
Fixes: lp:1692081
* https://bugs.launchpad.net/kicad/+bug/1692081
If you select a track with many segments (e.g. a length-tuned track) and
then select all connected items again ('U' -> 'U'), we would iterate
over all items in the selection and mark connections for each of the n
segments n separate times.
We avoid this by using the marked flag to show when the segment has
already been visited by the routine. This means that if the segment has
been checked for connections because it was connected to the previous
item, it won't be checked for connections again. However, a selection
that interleaves items from multiple connection segments will still
(potentially) be multiply checked as the BUSY flag is cleared each time
there is one not-BUSY track in the selection.
On large boards with high pad-count modules, searching each pad for hits
becomes expensive. We eliminate many of the pad searches by first
checking the module's bounding box before iterating over pads to look
for hits.
It can be useful to have similar class messages grouped together so that
error messages in a larger report don't get lost among the
warning/info/action messages.
This patch allows sorting of messages for dialogs that benefit from
organization. Default behavior of reporter messages remains
unchanged by this patch.
Fixes: lp:1772090
* https://bugs.launchpad.net/kicad/+bug/1772090
Freerouting-specialized menus are removed as FreeRouting is not
maintained or packaged for most OSes. Users can still import/export
SPECCTRA files in KiCad allowing them to interface with a custom
FreeRouting installation.
The graphical editor window for pcbnew and modedit have slight
differences, so different classes. But they should appear the same to
the user. This merges the differences into a dialog that looks the same
to the user.
Fixes: lp:1772389
* https://bugs.launchpad.net/kicad/+bug/1772389
Circles are defined by center and a point on their edge. This requires
the user to do extra math to figure out the size of the circle. The
patch allows the user to edit and draw circles using radial coordinates.
Seth Hillbrand
Maciej Suminski
Jeff Young
Wayne Stambaugh
Adam Wolf
Andrzej Wolski
John Beard
jean-pierre charras