Commit Graph

34 Commits

Author SHA1 Message Date
Jeff Young 050cfd34dd Move same-net higher-priority knockout to after smoothing.
Fixes https://gitlab.com/kicad/code/kicad/issues/6145
2020-10-24 17:48:30 +01:00
Jeff Young 7d3eee8cf9 Move DebugZoneFiller to advanced config.
This will hopefully keep it from accidentally getting checked in
again.
2020-09-23 10:52:44 +01:00
Jeff Young 524603de14 Fix debug flag that shouldn't have been merged. 2020-09-23 10:24:32 +01:00
Jeff Young fb7f98b51d Implement visual zone dumping and fix the default fill algo setting. 2020-09-23 01:14:35 +01:00
Jeff Young 4badcba4c2 Zone fill performance improvements
1) better load-balancing for deferred zones
2) sort zones by priority before filling
3) retire BOARD::GetZoneList() which had a horrible performance profile
4) implement a zone bounding box cache
5) better checks for IsCancelled() so long fills can be exited

Fixes https://gitlab.com/kicad/code/kicad/issues/5738
2020-09-21 21:09:58 +01:00
Jeff Young ce3819abf8 Remove redundant clearances from DRC dialog. Fold progress bar in. 2020-09-16 16:06:29 +01:00
Jeff Young 514da2f886 Move DRC dialog to new DRC engine. 2020-09-14 22:39:36 +01:00
Jeff Young e2bc7557cc Clean up arc/circle polygonization.
1) For a while now we've been using a calculated seg count from a given
maxError, and a correction factor to push the radius out so that all
the error is outside the arc/circle.  However, the second calculation
(which pre-dates the first) is pretty much just the inverse of the first
(and yields nothing more than maxError back). This is particularly
sub-optimal given the cost of trig functions.

2) There are a lot of old optimizations to reduce segcounts in certain
situations, someting that our error-based calculation compensates for
 anyway.  (Smaller radii need fewer segments to meet the maxError
condition.) But perhaps more importantly we now surface maxError in the
UI and we don't really want to call it "Max deviation except when it's
not".

3) We were also clamping the segCount twice: once in the calculation
routine and once in most of it's callers.  Furthermore, the caller
clamping was inconsistent (both in being done and in the clamping
value). We now clamp only in the calculation routine.

4) There's no reason to use the correction factors in the 3Dviewer;
it's just a visualization and whether the polygonization error is
inside or outside the shape isn't really material.

5) The arc-correction-disabling stuff (used for solder mask layer) was
somewhat fragile in that it depended on the caller to turn it back on
afterwards.  It's now only exposed as a RAII object which  automatically
cleans up when it goes out of scope.

6) There were also bugs in a couple of the polygonization routines where
we'd accumulate round-off error in adding up the segments and end up with
an overly long last segment (which of course would voilate the error
max). This was the cause of the linked bug and also some issues with vias
that we had fudged in the past with extra clearance.

Fixes https://gitlab.com/kicad/code/kicad/issues/5567
2020-09-11 11:23:49 +01:00
Jeff Young 393bb0fd83 Fix assert where geometry routine wasn't ready to handle layers.
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
2020-08-12 22:20:08 +01:00
Jeff Young 463100d67f Remove a long-standing hack to keep divots out of adjacent zones.
The new algorithm unions any adjacent zones before doing the
chamfer/fillet and then subtracts the other zones back out afterwards.

Fixes https://gitlab.com/kicad/code/kicad/issues/3812
2020-08-12 22:20:08 +01:00
Jeff Young a6d44676b3 Move commit handling outside of ZoneFiller.
This allows us to rever the commit on a cancel.

Fixes https://gitlab.com/kicad/code/kicad/issues/5107
2020-08-12 22:20:07 +01:00
Jon Evans 0d4ee39f75 CHANGED: Copper zones can be on more than one layer
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1963
2020-06-28 08:52:37 -04:00
Mark Roszko 11ff16be4e Switch to scoped enums 2019-12-20 14:11:39 +00:00
Jeff Young fe188489c7 A better hack for the post-ProgressReporter-loss-of-focus issue. 2019-07-14 18:18:48 +01:00
Jeff Young 928d6c5dff Implement preserved-corners to prevent divots when filling adjacent zones.
Fixes: lp:1460787
* https://bugs.launchpad.net/kicad/+bug/1460787
2019-07-14 18:18:48 +01:00
Seth Hillbrand 743c650129 Move zone refill to action
This unifies the zone refill across architecture into the tool-based
architecture.  Also provides ZONE_FILLER-based progress managment for
tools.

(cherry picked from commit be9cd98cb1)
2019-07-01 09:27:04 -07:00
Jeff Young 107d206dba Back to the drawing board for zone filling.
This one doesn't cut any corners so should be "correct".  And it
turns out to be pretty fast.
2019-06-25 21:10:21 +01:00
Jeff Young 3784950603 Added more sophisticated checking for thermal spoke connections.
And, again, some more performance optimizations to make up for it.
2019-06-25 11:34:28 +01:00
Jeff Young 70e6d95c7f More zone fill performance enhancements.
Knocking out unconnected spokes turns out to be very expensive, so
keep them in a list and only apply them if they're connected.
2019-06-25 11:34:28 +01:00
Jeff Young 5c89e4490e Change zone fill algorithm to better handle thermal reliefs.
Thermal reliefs must not knock-out spokes of other pads, while
clearances must knock-out spokes of all pads.  Therefore we now
do all thermal reliefs, then all spokes, then all clearances.

Fixes: lp:602176
* https://bugs.launchpad.net/kicad/+bug/602176

Fixes: lp:1782957
* https://bugs.launchpad.net/kicad/+bug/1782957
2019-06-25 11:34:27 +01:00
jean-pierre charras b1803bcf02 Pcbnew, zones filled: fix incorrect clipping of filled areas outside the board outlines.
fix also an other minor issue: these filled areas were slightly too large.
2019-06-22 09:55:57 +02:00
Jeff Young dae41b7460 Remove legacy segment-based zones.
Give the user the option of cancelling a file open if there are
segment zones; otherwise they're converted to polygon fills.

Fixes: lp:1823087
* https://bugs.launchpad.net/kicad/+bug/1823087
2019-04-12 20:19:23 +01:00
jean-pierre charras 7170720f3c Allow hatch pattern in filled zones
the filled areas can use a hatch pattern (crossing lines) using square holes.
The zone filler removes too small holes (truncated holes) from hatch pattern.
It avoid to create small holes when a hole pattern is truncated by the filled area base shape.
2019-03-31 08:21:40 +02:00
jean-pierre charras 353d9d7c9e Pcbnew, Zone refill: avoid useless refilling, when zone parameters are not modified.
Previously, in many cases the selected zone was refilled on exit selection, even if the zone was not modified.
This is annoying, because the zone fill can be really time consuming, and cannot be called without a good reason.
Now the refilling is made only if a zone parameter is actually modified.
2019-03-14 17:33:25 +01:00
Seth Hillbrand 969e85daa3 pcbnew: Standardize zone fills threading
This is a boyscouting commit to standardize the threading of zone fills.
We do not need to join threads after their completion, instead we simply
allow them to clean up their memory without blocking the user.  This
also sets the maximum number of threads that may be created to the
number of zones being filled.  More than this will only leave un-used
threads being created and immediately killed.

We also include the connectivity search as a phase in the fill progress
reporter.  This was the case before but did not utilize the correct
maxsize, leading to stalled progress bar.
2018-09-21 12:44:20 -07:00
Jeff Young a31017bc9c Check zone fills before plotting.
Also adds a "Draft Plot" button for those who wish to sidestep
zone checking (which can be slow).

Fixes: lp:1712579
* https://bugs.launchpad.net/kicad/+bug/1712579
2018-05-05 23:40:40 +01:00
Jeff Young 05dae96275 Move zone out-of-date check to the right place.
Fixes: lp:1760097
* https://bugs.launchpad.net/kicad/+bug/1760097
2018-04-09 15:09:47 +01:00
Jeff Young d54a252eaa Check zone fills for being out-of-date during DRC. 2018-04-09 11:05:14 +01:00
Jeff Young c77d13292b Reinstate multi-threading in zone filler. 2018-03-03 17:41:53 +00:00
Jeff Young f68bf33cd3 Implement progress reporter for cvpcb footprint loading.
Fixes: lp:1676910
* https://bugs.launchpad.net/kicad/+bug/1676910
2018-02-13 20:21:38 -05:00
jean-pierre charras 67a152ee8d zone filler: fix incorrect calculation of segments when filling zones with segments.
The calculation was made too early, before removing insulated islands.
Note: filling zones with segments is an old option, not very useful:
using only polygons has never created issues in gerber files.
2018-01-14 09:51:32 +01:00
Tomasz Włostowski eed924fe45 Fixed zone filling crash & thermal stubs inconsistency
Fixes: lp:1737557
* https://bugs.launchpad.net/kicad/+bug/1737557
Fixes: lp:1737542
* https://bugs.launchpad.net/kicad/+bug/1737542
Fixes: lp:1737541
* https://bugs.launchpad.net/kicad/+bug/1737541
2017-12-14 01:29:08 +01:00
Tomasz Włostowski f34b86d39e pcbnew: made zone filling algorithm thread-safe.
- moved zone filling algo outside ZONE_CONTAINER class
- const'ified methods that don't need to modify zone's properties
- cleanup: m_FillMode -> enum
2017-12-05 14:54:57 +01:00
Tomasz Włostowski fdd5023aee pcbnew: factored out ZONE_FILLER to a separate file 2017-12-05 14:54:57 +01:00