* Save dialog now supports saving boards to new file format.
* Add CMake option to build s-expression file save.
* Add check to main CMakeList.txt file to make sure nanometers are
enables when the new file format is built.
* Minor tweaks to object format functions for improved output.
* Rename kicad_plugin.h/cpp to legacy_plugin.h/cpp.
* Add s-expression Format() function to all objects derived from
BOARD_ITEM.
* Add s-expression Format() function to base objects as required.
* Add functions to convert coordinates from base internal units
(nanometers) to millimeter string for writing to s-expression
file.
* Add temporary dummy conversion functions to prevent link errors
until schematic and board object and action code can be separated
into DSO/DLL.
* Add CMake build option to build Pcbnew with nanometer internal
units.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
issue in cast to wxRect fixed (EDA_RECT accepts negative size, but not wxRect, so the wxRectcast is normalized now).
This fixes some bugs.
A minor other bug fix in Pcbnew.
This works, but in my version of wxformbuilder there is a bug which does not properly show the
subclass property, even though it is still in play. This happens after saving then loading the *.fbp file.
So it is a nuisance bug, but does not affect functionality.
* All objects derived from EDA_ITEM now have consistent hit test method
definitions.
* Remove double function calls from all classes derived from SCH_ITEM.
* Lots of Doxygen comment fixes.
* make 2 bitmaps more visible.
* fix incorrect screen redraw when rotating a component.
* netlist : the pcbnew advanced format can be now stored (persistant option) in project config.
Pcbnew:
* graphic_item_properties_base.fbp * dialog pad edit: make some strings more easier to translate.
* global pad edition: fix a bug that change pad position instead of pad size (round pas only).
Eeschema:
* fix a bug: new created wires were not alwaes shows until the screen was redrawn.
wxWidgets 2.9 knows wxSVGFILEDC device context.
Unfortunately, arcs are drawn as pies (this is a feature, not a bug).
This is not correct for Kicad.
So Kicad has its own wxSVGFILEDC (named KicadSVGFileDC) that is basically the same as wxSVGFILEDC,
but with arcs drawn as arcs, not pies.
Note also under wxWidgets 2.8 does not know wxSVGFILEDC , so kicad had already its own SVG device context.
* Convert Eeschema from manually linked list to DLIST for storing
SCH_ITEM objects.
* Add helper functions to SCH_SCREEN for appending list of SCH_ITEM
objects.
* Fix bug in wire editing code for accurate undo/redo behavior.
* Add member to DLIST to append another DLIST.
* Other minor code cleaning.
derived classes' implementations of these functions become non virtual and
can be truly _inlined_ for speed! All GetPosition() in derived classes were also
changed to return const wxPoint&, that is, a reference rather than a
full copy of the position wxPoint. There was no need for polymorphism in
{Get,Set}Position() since we never call these functions via generic pointer.
* Remove BOARD::{Get,Set}Position() since they were only there to satisfy
the pure virtuals established in BOARD_ITEM, which are now gone.
* Added const wxPoint& CPolyLine::GetPos(), made CPolyLine::Get{X,Y}() inline.
* Derive CPolyPt from wxPoint so we can return "const wxPoint&" fromt
CPolyLine::GetPos().
Eeschema: Viewlib is now accessible from Libedit (to browse libs or load a component to edit)
Libedit: uses now the same dialog as the schematic editor to load a component
Some code cleaning.
which is in turn already within BOARD.
* encapsulate class D_PAD with accessors, making data private.
* make D_PAD::GetBoundingRadius() do its longer calculation lazily, based on
m_boundingRadius == -1.
* Added a dialog to select options: one or 2 files, units (mm or inch), and force INSERT option.
* code cleaning
* Modify corresponding icon in menu to show a footprint, not a schematic component.
* Eeschema can generate this netlist format.
* Pcbnew can use (automatic identification) the current format or the new format.
* Cvpcb does not use yet the new format.
sizes. Tested with postscript output only. Required minor file format changes
to reflect the "portrait" setting. common/dialogs/dialog_page_settings.cpp
uses a checkbox but its name is "Landscape", which is inverted from portrait,
but since it is the more common choice, I used that rather than portrait.
The tooltip for that checkbox makes it clear. No portrait mode is supported
for "User" paper size.
* Remove unnecessary copy constructors from board and module library
objects.
* Add doClone() method to board and library objects.
* Add comment to class definitions where the default copy constructor
generated by the compiler was adequate.
* Replace copy method with clone method where applicable.
* Remove DuplicateStruct() function.
* Remove track object copy function.
* Remove unnecessary copy constructors from schematic and component
library objects.
* Add comment to class definitions where the default copy constructor
generated by the compiler was adequate.
* Add assignment operator to EDA_ITEM, SCH_ITEM, and all schematic
objects where the default assignment operator generated by the
compiler would not be adequate.
This feature is very useful for electronics hobbyists who use DIY PCB technology
(both toner transfer and photoresist methods).
Also width correction may be useful for PCB designers who take care of track width etching.
This patch also fixes some minor PS plotting issues.
* Move SCH_ITEM::Place() code into SCH_EDIT_FRAME so schematic item
objects no longer have any knowledge of the schematic frame window
or undo/redo containers.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* Add check box and flag to ignore replacing the component reference
designator field.
* Fix a resizing bug when switching between the find and replace modes of
the find/replace dialog.
* Fix replace component reference designator field bug.
* Force rebuild of search list when schematic is modified and the replace
dialog is closed.
* Prevent finding the next item when the find/replace dialog is closed.
* Respect warp mouse pointer setting when closing find/replace dialog.
* Fix duplicate mnemonic control accelerator keys in find/replace dialog.
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member.
* Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME
or PCB_EDIT_FRAME as appropriate.
* Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no
additional functionality and made code less readable.
* Remove EDA_TOOLBAR class definition from wxstruct.h and delete file
wineda_toolbar.cpp.
* Rename tool bar members to something more descriptive since the
horizontal and vertical references wont mean anything once the
tool bars are movable.
* Lots of dead code removal.
* changed all the RotatePoint() functions in trigo.{h,cpp} to take a double as the
angle, which is still in tenths of degrees for now.
* EDA_TEXT::m_Orient is now double, still in tenths of degrees (for a short while),
but the double means parsing files and saving them use a different format string.
++pcbnew
* DRAWSEGMENT::GetStart() and GetEnd() do not operate for S_ARC like they used to.
They are now simply accessors for m_Start and m_End. Use DRAWSEGMENT::GetArcStart()
and GetArcEnd() and GetCenter() for arcs. specctra_export.cpp was the only
source file dependent on the old behavior.
* DIMENSION::m_Text is now contained, not dynamically allocated.
* more kicad_plugin work.
* Enable replace toolbar button and menu entry.
* Improve find replace logging granularity.
* Fix find and replace dialog control hiding and disabling.
* Minor improvements to the SCH_FIND_REPLACE_DATA object.
* Move find collector list iterator into the collector object.
* Add visibility override flag to EDA_ITEM to temporarily show items that
are hidden during find and replace.
* added BOARD::GetPad(int), made BOARD::m_NetInfo private, and contained
within the BOARD, not dynamically allocated and owned via pointer.
* added BOARD::GetPadCount()
* changed NETINFO_LIST::GetCount() to GetNetCount()
* added BOARD::GetNetCount()
* more kicad_plugin work.
* Fix compil issue about automatically created pcb_plot_params.h :
pcb_plot_params.* moved from pcbnew to common because item_io.cpp (using this file) is compiled in common.
In common.cpp GetTimeStamp is renamed GetNewTimeStamp (a better name).
Pcbnew: prepare work to calculate connections between pads that inteserct and therefore can be connected without any track (composite pads).
Dick Hollenbeck
Wayne Stambaugh
jean-pierre charras
Alexander Zakamaldin
Alexander Zakamaldin
Joe Ferner
Marco Mattila
marco.