Commit Graph

81 Commits

Author SHA1 Message Date
Jeff Young 37906511f5 Class renaming.
DRAWSEGMENT  -> PCB_SHAPE
EDGE_MODULE  -> FP_SHAPE
TEXTE_PCB    -> PCB_TEXT
TEXTE_MODULE -> FP_TEXT
2020-10-05 11:55:33 +01:00
Mikolaj Wielgus 400c15b8eb Add mils to units, remove useMils variables 2020-10-03 20:06:56 +00:00
jean-pierre charras 0b23cb7dbb more cleanup about removing useless include 2020-10-03 15:26:03 +02:00
Jeff Young e2bc7557cc Clean up arc/circle polygonization.
1) For a while now we've been using a calculated seg count from a given
maxError, and a correction factor to push the radius out so that all
the error is outside the arc/circle.  However, the second calculation
(which pre-dates the first) is pretty much just the inverse of the first
(and yields nothing more than maxError back). This is particularly
sub-optimal given the cost of trig functions.

2) There are a lot of old optimizations to reduce segcounts in certain
situations, someting that our error-based calculation compensates for
 anyway.  (Smaller radii need fewer segments to meet the maxError
condition.) But perhaps more importantly we now surface maxError in the
UI and we don't really want to call it "Max deviation except when it's
not".

3) We were also clamping the segCount twice: once in the calculation
routine and once in most of it's callers.  Furthermore, the caller
clamping was inconsistent (both in being done and in the clamping
value). We now clamp only in the calculation routine.

4) There's no reason to use the correction factors in the 3Dviewer;
it's just a visualization and whether the polygonization error is
inside or outside the shape isn't really material.

5) The arc-correction-disabling stuff (used for solder mask layer) was
somewhat fragile in that it depended on the caller to turn it back on
afterwards.  It's now only exposed as a RAII object which  automatically
cleans up when it goes out of scope.

6) There were also bugs in a couple of the polygonization routines where
we'd accumulate round-off error in adding up the segments and end up with
an overly long last segment (which of course would voilate the error
max). This was the cause of the linked bug and also some issues with vias
that we had fudged in the past with extra clearance.

Fixes https://gitlab.com/kicad/code/kicad/issues/5567
2020-09-11 11:23:49 +01:00
Seth Hillbrand f493e270ea ADDED: Menu option to enable/disable snap to grid
You can now enable and disable snap to grid when drawing/editing across
all apps.  You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
2020-09-10 20:09:30 -07:00
Seth Hillbrand 173b4ff588 Add snapping to eeschema
This generalizes both the SetPosition() function and ORIGIN_VIEWITEM
class away from the pcbnew-centric.
2020-09-09 10:18:15 -07:00
Jeff Young 88635ee5b6 Clean up error messages.
Convert a lot of nags to InfoBar errors/warnings/messages, and some
that never should have been exposed to wxFAIL_MSGs.
2020-08-31 14:19:57 +01:00
Jeff Young e7db43285f ADDED new footprint fabrication attributes.
This commit also adds mapping of the new symbol properties
"exclude from BOM" and "exclude from board" to be correctly
handled in Update Board from Schematic.

Fixes https://gitlab.com/kicad/code/kicad/issues/2399

Fixes https://gitlab.com/kicad/code/kicad/issues/4643

Fixes https://gitlab.com/kicad/code/kicad/issues/2233
2020-08-28 11:05:58 +01:00
Jeff Young 692aeff334 Fix a bunch of usages of copy ctor that really meant duplicate.
In particular, "duplicate" means "with a new KIID".

Fixes https://gitlab.com/kicad/code/kicad/issues/5127
2020-08-10 14:23:11 +01:00
Jeff Young 9c8941e040 Remove a bunch of globals. 2020-04-16 17:34:46 +01:00
Jeff Young 6e800bddae Rationalize penWidth processing as first step in removing some globals. 2020-04-13 20:58:13 +01:00
Simon Richter 0c2d081925 Remove unused class and friend declarations
This forward declaration doesn't match the class defined inside the
function, so the friend declaration does nothing. The friend declaration is
also unneeded, because the function is a member of the class (and so are
types defined within it), so these already have access to private members.
2020-04-07 22:14:39 +00:00
Ian McInerney 4b647ba6b1 Refactor microwave parts into the microwave tool 2020-04-01 18:24:31 +01:00
Ian McInerney 13b6028e1b Refactor all math into a new kimath library
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions

This is part of cleaning the build system for #1906.
2020-01-07 17:12:59 +00:00
Seth Hillbrand 43768b71c0 Unify string lists of forbidden footprint chars
We have forbidden lists maintained in 3 separate locations.  This causes
a bit of confusion as to which is correct.

This makes the list uniform but remains to place the character set in a
single location.
2019-10-29 13:31:11 -07:00
Seth Hillbrand 6a45446496 pcbnew: Remove the last dlist from modules/pcbnew 2019-06-01 20:55:32 -07:00
Seth Hillbrand 9163ac543a pcbnew: Move pads to std::deque 2019-06-01 16:23:54 -07:00
Seth Hillbrand 0a668ee550 pcbnew: Remove segment count from board file
This removes the setting for number of segments per circle from the zone
definition.  All segment counts are handled by absolute error allowed.
2019-05-24 21:13:53 -07:00
John Beard d39cdb5565 Pcbnew: Disallow invalid mwwave inductor lengths
Some microwave inductor lengths cause invalid outputs
for the calculations, which causes jagged outputs.

* If the request length is such that four arcs and no straight
  segments is too long
* If the length is such that an N-turn coil is too short, but
  an N+1-turn coil is too long. This can happen when the coil
  count is small.

This patch doesn't fix the underlying geometric issue here - fixing
the first requires a numerical method, and fixing the second probably
needs an iterative approach. Both of these could benefit from
a refactor.

However, this patch does prevent the tools producing invalid outputs,
which can sometimes be quite subtle mistakes if the "jags" are small.

Fixes: lp:1792119
* https://bugs.launchpad.net/kicad/+bug/1792119
2019-01-24 21:23:43 -08:00
Seth Hillbrand 25f8b1ce72 pcbnew: Update multiple zone segments
Where we can get away with lower segment counts (localizing an anchor),
we keep the low-def 16 segment count.  Intermediate values and values
that are visible to the user are set to high definition.  Most are
simply hints to the inflation correction but where they show, the user
show see smooth lines.
2019-01-03 17:34:59 -08:00
Jeff Young cb61525394 Handle separate parsing rules for ID_SCH and ID_PCB.
This removes the existing constructors so that all parsing must
be explicit and callers are made aware that they need to think
about illegal characters, malformed ids, etc.

Fixes: lp:1783474
* https://bugs.launchpad.net/kicad/+bug/1783474
2018-07-26 15:43:53 +01:00
Jeff Young 74acb76e7f Switch UNIT_BINDER and DIALOG_SHIM to local units.
The general idea is to support user-units inheritance.  The
UNIT_BINDER allows wrapped controls to inherit units from their
parent dialog, while KEYWAY_HOLDER and DIALOG_SHIM allow child
KEYWAY_HOLDERs or DIALOG_SHIMs to inherit units from their
parent.

The GetUserUnits() method signature has to move to KEYWAY_HOLDER
rather than KEYWAY_PLAYER (where it makes more sense) as it’s the
only common ancestor of KEYWAY_PLAYER and DIALOG_SHIM.

As long as we'll be using the UNIT_BINDER more widely, it also
makes sense to move evaluation and validation into it.

This commit also provides eeschema’s DIALOG_LABEL_EDITOR and
pcbnew’s DIALOG_TRACK_VIA_PROPERTIES and DIALOG_SET_GRID as
models of how to use the new user-units inheritance, eval, and
validation.

Fixes: lp:593795
* https://bugs.launchpad.net/kicad/+bug/593795

(cherry picked from commit c8bc53e)
2018-07-17 15:09:53 +01:00
Maciej Suminski 8b21a0a53d Changed PCB_BASE_FRAME::CreateNewModule() to stop adding modules to the board
When a new footprint is created, CreateNewModule() added it to a dummy
board in the footprint editor. If a footprint was indeed created (the
action has not been aborted) then the dummy board was cleared,
destroying the just created footprint. Also, the new footprint is later
added with AddModuleToBoard() call.

Fixes: lp:1761052
* https://bugs.launchpad.net/kicad/+bug/1761052
2018-04-04 09:34:12 +02:00
Jeff Young f32f14dc8f Add WX_TEXT_ENTRY_DIALOG which inherits from DIALOG_SHIM.
Fixes: lp:1754977
* https://bugs.launchpad.net/kicad/+bug/1754977
2018-03-12 22:45:51 +00:00
jean-pierre charras 8552f3fedf fix code after renaming files 2018-01-29 22:00:44 +01:00
Maciej Suminski cca63801bf Renamed D_PAD::{Set,Get}PadName() to D_PAD::{Set,Get}Name() 2017-09-19 18:23:50 +02:00
jean-pierre charras b8c621a991 fix a few Coverity warnings. 2017-08-06 14:23:03 +02:00
Dick Hollenbeck 19e6bde09a Rewrite class UTF8 to contain rather than extend std::string storage.
This forces the compiler class specific features rather than borrowing
from the base class's std::string.  In some cases prior to this,
wxString( std::string ) was being called rather than UTF8::operator
wxString() leading to garbled wxStrings.

Added function UTF8::wx_str() which is of great convenience also.

Implicit conversions still work as before, and hopefully more reliably.
2017-07-26 08:30:12 -04:00
Tomasz Włostowski 3b16d3cffe further DLIST/Iterators cleanup, some code formatting 2017-06-23 11:12:37 +02:00
John Beard ce731f8b62 Add GAL microwave tools
This adds the microwave tools to GAL in Pcbnew as a new tool:
MICROWAVE_TOOL.

Some new preview items are introduced to support this:

* TWO_POINT_GEOM_MANAGER for managing construction of two-point
  geometries, such as that used to construct the inductor.
* CENTRELINE_RECT_ITEM a preview item to draw ractangle with a given
  aspect ratio along a line (specified using a TWO_POINT_GEOM_MANAGER)

PCB_TOOL gets a generic event loops which should be useful for more
than just microwave tools:

* doInteractiveItemPlacement() - handles event loops that wait for a
  click, create an item on click and then allow moving it
  around/flipping, etc.

Fixes: lp:1531323
* https://bugs.launchpad.net/kicad/+bug/1531323
2017-03-20 16:10:51 +01:00
John Beard 3994e9a268 Allow calling of MW inductor function externally
This makes it possible to access the creation functions
for the microwave inductor externally, so that it can be
used from GAL.

Unlike the Gap/Stub tools, the inductor tool is more interactive, and
doesn't just return a MODULE*.

Introduces a new directory in pcbnew called 'microwave' to better
isolate generic (i.e. canvas-agnostic) functions, and a namespace MWAVE
to avoid polluting the global namespace.
2017-03-20 16:10:51 +01:00