Commit Graph

23 Commits

Author SHA1 Message Date
Jon Evans 0d4ee39f75 CHANGED: Copper zones can be on more than one layer
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1963
2020-06-28 08:52:37 -04:00
Mark Roszko 11ff16be4e Switch to scoped enums 2019-12-20 14:11:39 +00:00
Jeff Young fe188489c7 A better hack for the post-ProgressReporter-loss-of-focus issue. 2019-07-14 18:18:48 +01:00
Jeff Young 928d6c5dff Implement preserved-corners to prevent divots when filling adjacent zones.
Fixes: lp:1460787
* https://bugs.launchpad.net/kicad/+bug/1460787
2019-07-14 18:18:48 +01:00
Seth Hillbrand 743c650129 Move zone refill to action
This unifies the zone refill across architecture into the tool-based
architecture.  Also provides ZONE_FILLER-based progress managment for
tools.

(cherry picked from commit be9cd98cb1)
2019-07-01 09:27:04 -07:00
Jeff Young 107d206dba Back to the drawing board for zone filling.
This one doesn't cut any corners so should be "correct".  And it
turns out to be pretty fast.
2019-06-25 21:10:21 +01:00
Jeff Young 3784950603 Added more sophisticated checking for thermal spoke connections.
And, again, some more performance optimizations to make up for it.
2019-06-25 11:34:28 +01:00
Jeff Young 70e6d95c7f More zone fill performance enhancements.
Knocking out unconnected spokes turns out to be very expensive, so
keep them in a list and only apply them if they're connected.
2019-06-25 11:34:28 +01:00
Jeff Young 5c89e4490e Change zone fill algorithm to better handle thermal reliefs.
Thermal reliefs must not knock-out spokes of other pads, while
clearances must knock-out spokes of all pads.  Therefore we now
do all thermal reliefs, then all spokes, then all clearances.

Fixes: lp:602176
* https://bugs.launchpad.net/kicad/+bug/602176

Fixes: lp:1782957
* https://bugs.launchpad.net/kicad/+bug/1782957
2019-06-25 11:34:27 +01:00
jean-pierre charras b1803bcf02 Pcbnew, zones filled: fix incorrect clipping of filled areas outside the board outlines.
fix also an other minor issue: these filled areas were slightly too large.
2019-06-22 09:55:57 +02:00
Jeff Young dae41b7460 Remove legacy segment-based zones.
Give the user the option of cancelling a file open if there are
segment zones; otherwise they're converted to polygon fills.

Fixes: lp:1823087
* https://bugs.launchpad.net/kicad/+bug/1823087
2019-04-12 20:19:23 +01:00
jean-pierre charras 7170720f3c Allow hatch pattern in filled zones
the filled areas can use a hatch pattern (crossing lines) using square holes.
The zone filler removes too small holes (truncated holes) from hatch pattern.
It avoid to create small holes when a hole pattern is truncated by the filled area base shape.
2019-03-31 08:21:40 +02:00
jean-pierre charras 353d9d7c9e Pcbnew, Zone refill: avoid useless refilling, when zone parameters are not modified.
Previously, in many cases the selected zone was refilled on exit selection, even if the zone was not modified.
This is annoying, because the zone fill can be really time consuming, and cannot be called without a good reason.
Now the refilling is made only if a zone parameter is actually modified.
2019-03-14 17:33:25 +01:00
Seth Hillbrand 969e85daa3 pcbnew: Standardize zone fills threading
This is a boyscouting commit to standardize the threading of zone fills.
We do not need to join threads after their completion, instead we simply
allow them to clean up their memory without blocking the user.  This
also sets the maximum number of threads that may be created to the
number of zones being filled.  More than this will only leave un-used
threads being created and immediately killed.

We also include the connectivity search as a phase in the fill progress
reporter.  This was the case before but did not utilize the correct
maxsize, leading to stalled progress bar.
2018-09-21 12:44:20 -07:00
Jeff Young a31017bc9c Check zone fills before plotting.
Also adds a "Draft Plot" button for those who wish to sidestep
zone checking (which can be slow).

Fixes: lp:1712579
* https://bugs.launchpad.net/kicad/+bug/1712579
2018-05-05 23:40:40 +01:00
Jeff Young 05dae96275 Move zone out-of-date check to the right place.
Fixes: lp:1760097
* https://bugs.launchpad.net/kicad/+bug/1760097
2018-04-09 15:09:47 +01:00
Jeff Young d54a252eaa Check zone fills for being out-of-date during DRC. 2018-04-09 11:05:14 +01:00
Jeff Young c77d13292b Reinstate multi-threading in zone filler. 2018-03-03 17:41:53 +00:00
Jeff Young f68bf33cd3 Implement progress reporter for cvpcb footprint loading.
Fixes: lp:1676910
* https://bugs.launchpad.net/kicad/+bug/1676910
2018-02-13 20:21:38 -05:00
jean-pierre charras 67a152ee8d zone filler: fix incorrect calculation of segments when filling zones with segments.
The calculation was made too early, before removing insulated islands.
Note: filling zones with segments is an old option, not very useful:
using only polygons has never created issues in gerber files.
2018-01-14 09:51:32 +01:00
Tomasz Włostowski eed924fe45 Fixed zone filling crash & thermal stubs inconsistency
Fixes: lp:1737557
* https://bugs.launchpad.net/kicad/+bug/1737557
Fixes: lp:1737542
* https://bugs.launchpad.net/kicad/+bug/1737542
Fixes: lp:1737541
* https://bugs.launchpad.net/kicad/+bug/1737541
2017-12-14 01:29:08 +01:00
Tomasz Włostowski f34b86d39e pcbnew: made zone filling algorithm thread-safe.
- moved zone filling algo outside ZONE_CONTAINER class
- const'ified methods that don't need to modify zone's properties
- cleanup: m_FillMode -> enum
2017-12-05 14:54:57 +01:00
Tomasz Włostowski fdd5023aee pcbnew: factored out ZONE_FILLER to a separate file 2017-12-05 14:54:57 +01:00