Somewhere during v5 rc cycle, the trimming of wires laid over simple
components was removed. The wires were still removed as soon as the
user moved the component again. This corrects the first behavior to
intended action for simple components.
Fixes: lp:1794019
* https://bugs.launchpad.net/kicad/+bug/1794019
(cherry picked from commit 9831a14ef3)
Reset lock file when saving a schematic sheet to a different file name.
This prevents a file is already open error from being displayed when
opening the original file.
Fixes lp:1788507
https://bugs.launchpad.net/kicad/+bug/1788507
Under certain conditions, it was possible for the block handler to be
entered with no mouse capture callback which would raise a rather
cryptic error message to the user. This should have always been an
assertion so users will not see this issue in release builds.
Fixes lp:1791839
https://bugs.launchpad.net/kicad/+bug/1791839
The symbol library table rescue candidate was only using the item name
of the library ID object which was being compared to the fully formatted
library ID causing a comparison failure so no instances of any rescued
symbols was shown in the dialog.
Fixes lp:1791805
https://bugs.launchpad.net/kicad/+bug/1791805
Even though slash is a valid character in symbol names, it is a revision
separator, but is not the case with Eagle symbol names.
Fixes: lp:1791653
* https://bugs.launchpad.net/kicad/+bug/1791653
Spice may include a list of directives that are wrapped with
.control and .endc. Such directives do not have a dot prefix, so
they need to be handled in a special way.
Fixes: lp:1787902
* https://bugs.launchpad.net/kicad/+bug/1787902
When expanding the drag item to allow corners, we accidentally picked up
other items in the list. This limits the items that can be dragged to
only those that are explicitly in the draggable list.
A side effect of this commit is that when converting from move to drag
(with tab), items not in the draggable list will be left in place.
Fixes: lp:1787966
* https://bugs.launchpad.net/kicad/+bug/1787966
Previously, when creating a new instance of a sheet, the full set of references
was cleared.
Moreover, if this sheet has sub-sheets, the annotation was incorrectly handled
Now only (and all) new sheet path(s) created have a reference cleared, as expected.
(new sheet paths can be more than one, if the new instance of the sheet has sub-sheets)
Fixes: lp:1789048
https://bugs.launchpad.net/kicad/+bug/1789048
Using Title + Message wasn't working for all the dialogs which
did substitutions in the message (which was a lot of them).
Fixes: lp:1789348
* https://bugs.launchpad.net/kicad/+bug/1789348
We have a dialog shim that raises the ERC dialog in front of the
schematic frame, which is useful for keeping the ERC dialog visible
during debugging. But mouse move events do not pass through to the
schematic, resulting in a captured mouse pointer but no drawing updates.
As a work-around we close the ERC dialog while placing new components.
Previous ERC data still exist when the window is launched again.
Fixes: lp:1779851
* https://bugs.launchpad.net/kicad/+bug/1779851
It was only a overzealous (in this case) assert, with no issue.
The fix avoid calling DeleteAll() when there is nothing to delete.
Fixes: lp:1787810
https://bugs.launchpad.net/kicad/+bug/1787810
Also updates the file menu IDs so that we can actually handle
more than 9 items in the file history.
Also adds configurable file history length to the other gerber
files (zip, drill and job).
Fixes: lp:1745729
* https://bugs.launchpad.net/kicad/+bug/1745729
Eagle files that are edited may be missing required data. While we do
not need to handle these files, we do need to prevent segfaults in KiCad
when reading them.
Primary change is to replace most control/window borders with
AUI pane borders. We implement our own AUI border drawing
routine which avoids the ugly one-pixel white frames around
dark canvasses.
Also increases the signal-to-noise ratio of all the pane
creation code in the various frames.
The parser also now skip empty lines.
This bug created unreadable saved .dcm files and .sch files after adding a new symbol.
Fixes: lp:1786141
https://bugs.launchpad.net/kicad/+bug/1786141
The issue is in:
wxPoint( parseInt( aReader, line, &line ), parseInt( aReader, line, &line ) )
that calls parseInt() twice, but parseInt changes parameters at each call.
(Does not return the same value at each call).
However, due to some side effect or compil optimization, the value returned is incorrect.
It can be dependent of the compiler, and optimization level.
This kind of code must be avoided.
Spooling up a full PLAYER in the background takes too long.
This also fixes bugs around how the tables are saved, although
that was just missing code rather than anything architectural.
Fixes: lp:1785436
* https://bugs.launchpad.net/kicad/+bug/1785436
Be more intelligent about sorting lib tree items. (Footprint
entries, for instance, come out of an already-sorted list.)
Don't recreate menus twice when laoding Footprint Editor.
More pervasive use of WX_FILENAME to avoid expensive calls to
wxFileName::SplitPath() and string concatenation.
For POSIX kernels do all the work on the file-system side so we
don't have to keep converting back and forth between encodings.
Drop all uses of wxRAISED_BORDER and wxSUNKEN_BORDER from dialogs and
panels used in main frame windows.
Drop use of wxSP_3DSASH options on all wxSplitterWindow definitions.
Minor dialog alignment and spacing fixes.
This also fixes a bunch of bugs where an error during save would
still close the window (rather than cancelling the close action).
Fixes: lp:1785034
* https://bugs.launchpad.net/kicad/+bug/1785034
Put the buttons in platform-compliant order.
Get rid of SaveMultiOptions in favour of repeated standard save
dialogs with a "Apply to all" checkbox.
Fixes: lp:1783444
* https://bugs.launchpad.net/kicad/+bug/1783444
Eagle allows for variants of components to be listed in the schematic.
This patch copies the variant data into the imported schematic item,
prefixing the alternate variant names with "VARIANT_" and keeping the
alternate values.
There's no point in having both Save Symbol and Save Library when
only one can be selected at a time.
Also cleans up a bunch of extraneous icons, and fixes a few
copy/paste errors in menus and toolbars.
This removes the existing constructors so that all parsing must
be explicit and callers are made aware that they need to think
about illegal characters, malformed ids, etc.
Fixes: lp:1783474
* https://bugs.launchpad.net/kicad/+bug/1783474
Also brings horizontal toolbar in line with Pcbnew and Eeschema.
And updates the EDA_LIST_DIALOG to current practices.
This finishes the removal of the active library concept from the
Symbol Editor (started with the new component tree in 5.0).
Fixes: lp:1740717
* https://bugs.launchpad.net/kicad/+bug/1740717
Use standard button layout and remove extraneous heading.
Move to TransferDataTo/FromWindow.
Close dialog after printing.
Fixes: lp:1763319
* https://bugs.launchpad.net/kicad/+bug/1763319
Don't beep when inserting character from focused grid cell (but
before editor is opened).
Handle reference validation separately from name validation and
separately from user field value validation. The old way of setting
the fieldId on the validator wasn't working because the validator
gets copied.
Run validation when leaving cell. Don't just check for empty
(particularly for fields that CAN be empty).
Fixes: lp:1782917
* https://bugs.launchpad.net/kicad/+bug/1782917
(cherry picked from commit 79e04de)
Take field name sizes and user preference line thickness into account
when calculating placement of the text fields of a hierarchical sheet on
the canvas.
The previous calculations contained some magic numbers which seem to
have been well suited to cases where line width is 8 and text size is
0.050. However, the text collided with the sheet outline as soon as text
size or line width was increased.
This commit has been evaluated with line widths ranging from 5 to 100
and text sizes ranging from 0.02 to 0.200. Also in combination with
characters such as qyg and ÅÄÖÜ in the file/sheet names.
(cherry picked from commit b1a60b2)
When drawing a hierarchical sheet symbol, the text line width for
"Sheet: ..." and "File: ..." are now clamped (limited).
Clamp_Text_PenSize() is used for the calculation.
Before, without the clamping, these text widths grew with the line width
preferences option. That resulted in characters cluttering up.
(cherry picked from commit b76407e)
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
Work around wxWidgets failure to send first key through validator.
Unify treatment of INDETERMINATE values (such as for multiple
selections with mixed values).
(cherry picked from commit 7308729)
Allow copy of a single cell demarcated by the grid cursor.
Paste of lib_table s-expressions should always start at 0,0.
Let caller or specialized sub-class do auto-sizing; don’t
do it from within the base GRID_TRICKS.
Don’t start GRID_TRICKS menu IDs at -1; wxWidgets doesn’t
like it when you get to 0.
Add column visibility menu.
(cherry picked from commit e5071ed)
It's time to fix the focus issues. This adds a new SetInitialFocus()
routine to DIALOG_SHIM which will need to be called from a lot of
dialogs.
(cherry picked from commit 6d9647a)
The general idea is to support user-units inheritance. The
UNIT_BINDER allows wrapped controls to inherit units from their
parent dialog, while KEYWAY_HOLDER and DIALOG_SHIM allow child
KEYWAY_HOLDERs or DIALOG_SHIMs to inherit units from their
parent.
The GetUserUnits() method signature has to move to KEYWAY_HOLDER
rather than KEYWAY_PLAYER (where it makes more sense) as it’s the
only common ancestor of KEYWAY_PLAYER and DIALOG_SHIM.
As long as we'll be using the UNIT_BINDER more widely, it also
makes sense to move evaluation and validation into it.
This commit also provides eeschema’s DIALOG_LABEL_EDITOR and
pcbnew’s DIALOG_TRACK_VIA_PROPERTIES and DIALOG_SET_GRID as
models of how to use the new user-units inheritance, eval, and
validation.
Fixes: lp:593795
* https://bugs.launchpad.net/kicad/+bug/593795
(cherry picked from commit c8bc53e)
Step 1 of the g_UserUnit global eradication. This commit includes
basic hookup of hotkeys, units tool-buttons and grid dialogs.
(cherry picked from commit e0500ab)
Be consistent with order, formatting, etc.
Remove debug stuff such as zone timestamp and net code.
Clean up misleading pad messages.
(cherry picked from commit 2132109)
Also makes better use of space to significantly increase number
of markers shown.
Fixes: lp:1748676
* https://bugs.launchpad.net/kicad/+bug/1748676
(cherry picked from commit a1d8097)
The old item pointers (which aren't safe to keep around) were
removed in favour of opaque references (void*) which are then
compared against existing items when needed.
Also improves brightening by brightening the whole footprint
(ie: its pads, drawings, reference and value) rather than just
its target cross.
(cherry picked from commit 30e90b0)
Small icons for dialog browse, refresh, and row operations.
Icons in B&W so they don't over-emphasize with respect to other
controls in the dialog.
Layout cleanup for consistency. Removal of the blank space to
left of the fields list in the Global Fields Editor, and addition
of column-sizing-to-list-width.
More even spacing for buttons in html report panel.
Honor platform conventions for action button order and layout.
Move netlist importer to update-pcb-from-schematic algorithm
(display messages and then update instead of "dry run" checkbox)
(cherry picked from commit b21e19d)
Three instances of variables named "reference" shadow a typedef
within std::vector producing:
warning: declaration of ‘reference’ shadows a previous local [-Wshadow]
note: shadowed declaration is here
typedef typename _Alloc_traits::reference reference;
This patch works around by renaming "reference" to "schReference".
When parsing component names, we need to account for the possibility of
illegal characters (e.g. "/", ":") in the names from v4 libraries. They
are fixed internally by the cache parser but if we don't fix them
in the rescue routine, the symbol won't match it's cache name.
This standardizes all schematic illegal character routines into LIB_ID
Fixes: lp:1774774
* https://bugs.launchpad.net/kicad/+bug/1774774
For the path separator in full filename, the sheet filename from the dialog uses the Unix notation,
and the "old" sheet filename uses the default notation (it is the actual filename).
Therefore, on Windows, after closing the dialog, the filename was always seen as modified,
and the hierarchy was incorrectly modified (annotation cleared).
During the symbol library table implementation, the legal character
tests for the footprint library table were changed and the forward
slash '/' character became illegal. This change broke editing some
users footprint library tables that already had '/' in library table
nicknames. This change split the library nickname and library item
name illegal character tests.
Also sets the initial footprint to the current footprint when
doing a Choose Footprint from the Eeschema Edit Property
dialog.
Fixes: lp:1776126
* https://bugs.launchpad.net/kicad/+bug/1776126
Any errors in the dialog should be handled and, at worst, allowed to
redo. SPICE_VALUE throws KI_PARAM_ERROR, so we catch that explicitly.
Fixes: lp:1776051
* https://bugs.launchpad.net/kicad/+bug/1776051
This refactors the symbol field editor's checkbox state-saving code to
deal with multiple projects with disjoint field sets more consistently.
For instance, imagine I have a two projects
* Proj1 has fields A, B, C
* Proj2 has fields A, B, D
Under the old scheme, when I switch from one project to the other the
state of fields C and D will be forgotten. With the new approach,
however, they are retained.
Not to mention, the implementation is considerably simpler. Fixes
This makes it significantly easier to find a particular component when
using the field editor, as I often do for part selection.
Fixes: lp:1772169
* https://bugs.launchpad.net/kicad/+bug/1772169
There are a bunch of problems with event processing and closing
documents, etc., when enabled. See the bug report for more
info.
Fixes: lp:1774777
* https://bugs.launchpad.net/kicad/+bug/1774777
Seth Hillbrand
Simon Richter
Jeff Young
Wayne Stambaugh
jean-pierre charras
Maciej Suminski
Joël Bertrand
Ronnie Gaensli
Mark van Doesburg
John Beard
Martin Aberg
Baranovskiy Konstantin
Carsten Schoenert
Ben Gamari