Commit Graph

51 Commits

Author SHA1 Message Date
Jeff Young 098e96f1c7 Use more precise formatting in DRC messages when less precise values are identical.
Fixes https://gitlab.com/kicad/code/kicad/issues/12587
2022-10-06 22:18:53 +01:00
Jeff Young 64a6fc0fd4 Push UNITS_PROVIDER down into a low-level mixin.
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
Mark Roszko b00178adb3 Nuke base_units from orbit 2022-09-16 04:38:10 +00:00
Jeff Young 2dc6300501 Move EDA_ITEM bounding boxes to BOX2I. 2022-08-31 10:16:55 +01:00
Jeff Young 1a672aba56 Fix a couple of DRC bugs where the bbox wasn't inflated for largestClearance.
Also removes a case of double-testing a pad with a non-plated hole.
2022-08-26 13:22:57 +01:00
Jeff Young 96f01d33c8 Performance improvements.
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference

Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
Jeff Young 43df863df2 Fix issue with caches not being initialized when printing msg bar. 2022-08-01 13:09:51 +01:00
Jeff Young f41af10007 Clean up hole shapes for safety (smart pointer) and consistency. 2022-07-22 23:06:07 +01:00
Jeff Young 97b0005780 More caching for DRC.
Also fixes a bug where some physical clearance tests would be run even
if the clearance was 0 (or if the rule was set to IGNORE).
2022-06-17 23:58:31 +01:00
Seth Hillbrand 5327b10064 Remove shared wxString instance in DRC
Threaded DRC access will write to this string, re-allocating the memory
without any synchronization between threads using the string.  Comment
adding this listed performance as a reason for using shared strings.
Measured performance does not seem noticeably different in either case,
even with high-error count boards.  If there is a case where the
performance is limiting, we can replace these wxStrings with
std::wstring and utilize fmt

Fixes https://gitlab.com/kicad/code/kicad/issues/9888
2022-06-15 16:46:03 -07:00
Jeff Young 6f555b6258 wxT() and some cleanup in DRC. 2022-03-11 23:19:16 +00:00
Jeff Young ae307e1b34 Parallelize DRC triangulation, keepout processing, and sliver checking.
Also fixes issue with adding fractured polygons in sliver checking which
slowed the board from hell down to less than a crawl.
2022-03-11 20:52:11 +00:00
Marek Roszko 7d671cff1e Scoop up some more wxPoints 2022-01-01 21:06:40 -05:00
Marek Roszko c4c56de708 Neurotically update position wxPoint usages 2022-01-01 11:55:51 -05:00
Jeff Young ab583a32f9 Better layer handling for DRC markers.
Fixes https://gitlab.com/kicad/code/kicad/issues/10126
2021-12-26 15:06:12 +00:00
Jeff Young 09b7e0b72b ADDED Exclude Footprint from Courtyard Requirement.
Fixes https://gitlab.com/kicad/code/kicad/issues/9881
2021-12-24 21:10:28 +00:00
Jeff Young ed79f6e511 Clean up some TODOs. 2021-12-24 21:10:28 +00:00
Jeff Young 5f37c2b247 Custom rule severities.
ADDED severity token to custom rule syntax.  Each rule can now define
its own severity.

Fixes https://gitlab.com/kicad/code/kicad/issues/6148
2021-12-24 15:42:22 +00:00
Jeff Young 0a609dd48d Add footprint library checking to DRC.
Fixes https://gitlab.com/kicad/code/kicad/issues/6821
2021-12-23 19:18:45 +00:00
Jeff Young a397e85589 Implement PTH/NPTH/courtyard collision tests.
Fixes https://gitlab.com/kicad/code/kicad/issues/9081
2021-09-04 00:16:26 +01:00
Jeff Young 1ec70d30af Cherry-pick some 7.0 Clearance Resolution improvements.
6.0 will be in the field for a long time, and the better the debugging
tools we have available the less costly it will be to maintain.

Fixes https://gitlab.com/kicad/code/kicad/issues/8961
2021-08-15 19:03:58 +01:00
Marek Roszko 10e60acf34 Clean up including of board_design_settings.h 2021-06-06 15:03:42 -04:00
Ian McInerney 4f05262705 Cleanup includes in board.h and footprint.h 2021-06-03 20:19:52 +01:00
Jeff Young b6f2941a06 Another try a allowing touching courtyards.
Fixes https://gitlab.com/kicad/code/kicad/issues/8076
2021-03-31 22:54:30 +01:00
Jeff Young 737262ffa8 Allow touching courtyards.
Fixes https://gitlab.com/kicad/code/kicad/issues/8076
2021-03-31 10:44:59 +01:00
Jeff Young 6d6765cdaf Improve DRC status reporting.
1) Don't report on tests not run.
2) Don't cancel subsequent tests because the current test didn't
have any constraints
3) Exit a little bit quicker when cancelled

Fixes https://gitlab.com/kicad/code/kicad/issues/7724
2021-02-27 13:44:45 +00:00
Jeff Young e89f9db438 Footprint disallow layer checking needs to be based on courtyards.
Fixes https://gitlab.com/kicad/code/kicad/issues/7620
2021-02-20 14:13:36 +00:00
Jeff Young 6272b48481 Make sure layer gets passed in to rules evaluation. 2021-02-08 14:53:49 +00:00
Jeff Young 2d8cac658e Allow negative clearances to signal supression of DRC test. 2021-01-23 00:10:01 +00:00
Jeff Young 018c17399d SNR. 2021-01-01 23:17:49 +00:00
Jeff Young 17800b926f Honour couryard_clearance rules when checking for courtyard overlaps. 2020-12-23 17:34:21 +00:00
Jeff Young b68b1692ec Clean up some more user messages.
Mostly component -> symbol but also some I18N cleanup.
2020-12-18 12:49:20 +00:00
Jeff Young 1391774f64 Re-factor boundary/courtyard checker error handling.
ADDED Footprint Checker dialog to display the results in.

Fixes https://gitlab.com/kicad/code/kicad/issues/6446
2020-11-21 20:57:35 +00:00
Jeff Young b123318cf6 Encourage use of full DRC for board & footprint malformed outlines.
It shows much more detail.  Removes some nag dialogs and places
hypertext links in others.

Also fixes the auto-layer-showing to correctly show Edge.Cuts or
F.CrtYd or B.CrtYd for errors relating to them.

Fixes https://gitlab.com/kicad/code/kicad/issues/6446
2020-11-20 17:24:52 +00:00
Jeff Young bdbb68f813 MODULE -> FOOTPRINT. 2020-11-13 16:04:03 +00:00
Jeff Young 52a46341db More module -> footprint. 2020-11-13 15:16:24 +00:00
Jeff Young ae9afdd169 SNR. (Mostly for progammers, but a little for user messages.) 2020-11-02 16:20:00 +00:00
Jeff Young d5addb692c Move a bunch of DRC tests to RTrees. 2020-10-31 15:45:41 +00:00
Jeff Young 386cefbe84 Do footprint keepouts by courtyard.
Fixes https://gitlab.com/kicad/code/kicad/issues/6162
2020-10-25 18:17:58 +00:00
Seth Hillbrand 4085757aeb Remove beginning/ending spaces in translations
Adding space padding makes translations more difficult by increasing
string counts
2020-10-20 12:08:04 -07:00
Jeff Young 85c6cebd77 Rework silk-to-pad checker to handle all solder mask clipping of silk.
Fixes https://gitlab.com/kicad/code/kicad/issues/5851
2020-10-04 13:21:01 +01:00
Jeff Young 67b5d24995 Support ESC & Cancel for DRC.
Fixes https://gitlab.com/kicad/code/kicad/issues/5698
2020-09-18 22:14:00 +01:00
Jeff Young a3d65a2b43 Smoother progress reporting for DRC checks.
Also moves Messages tab out to an overlay, and restores the longer
messages now that messages are no longer a textbox in the upper right.
2020-09-17 20:13:39 +01:00
Jeff Young ce3819abf8 Remove redundant clearances from DRC dialog. Fold progress bar in. 2020-09-16 16:06:29 +01:00
Jeff Young e2e229da96 Finish exorcising the old DRC system.
This moves the various BOARD_ITEM calls to the new system, and make
the DRC_ENGINE long-lived so that it can field those queries.
2020-09-15 20:15:46 +01:00
Jeff Young 665212341d Cleanup (consistent naming, 100-char line width, message precision). 2020-09-15 12:07:31 +01:00
Jeff Young 514da2f886 Move DRC dialog to new DRC engine. 2020-09-14 22:39:36 +01:00
Jeff Young 748bee1bc7 Hook up netclasses and board minimums to new DRC engine.
Improves implicit rule reporting.
Makes some internal names more consistent.
Moves DRC_REPORT to the test framework.
Removes priority (which isn't supported in the grammar)
2020-09-13 17:08:24 +01:00
Jeff Young 5d9301d394 Adjust isErrorLimitExceeded so it can be used for severity==IGNORE. 2020-09-13 17:08:24 +01:00
Jeff Young ce2937a399 Move rest of DRC tests to kicad. 2020-09-11 23:14:12 +01:00