* Complete encapsulation of the MODULE class.
* Complete encapsulation of the EDA_TEXT class.
* Encapsulate most of the ZONE_CONTAINER class.
* Add pcbcommon library as a dependency for reSWIGging the scripting
support. This should cover most dependency cases.
* Move EDA_TEXT object into separate header and source file.
* Compile EDA_TEXT class separately for BOARD_ITEM and SCH_ITEM units.
* Compile PAGE_INFO class separately for BOARD_ITEM and SCH_ITEM units.
* Minor formatting tweaks to Pcbnew s-expression file.
* Move internal unit formatting functions into BOARD_ITEM and SCH_ITEM.
* Add s-expression Format() function to all objects derived from
BOARD_ITEM.
* Add s-expression Format() function to base objects as required.
* Add functions to convert coordinates from base internal units
(nanometers) to millimeter string for writing to s-expression
file.
* Add temporary dummy conversion functions to prevent link errors
until schematic and board object and action code can be separated
into DSO/DLL.
* Add CMake build option to build Pcbnew with nanometer internal
units.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
* Convert Eeschema from manually linked list to DLIST for storing
SCH_ITEM objects.
* Add helper functions to SCH_SCREEN for appending list of SCH_ITEM
objects.
* Fix bug in wire editing code for accurate undo/redo behavior.
* Add member to DLIST to append another DLIST.
* Other minor code cleaning.
sizes. Tested with postscript output only. Required minor file format changes
to reflect the "portrait" setting. common/dialogs/dialog_page_settings.cpp
uses a checkbox but its name is "Landscape", which is inverted from portrait,
but since it is the more common choice, I used that rather than portrait.
The tooltip for that checkbox makes it clear. No portrait mode is supported
for "User" paper size.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
In common.cpp GetTimeStamp is renamed GetNewTimeStamp (a better name).
Pcbnew: prepare work to calculate connections between pads that inteserct and therefore can be connected without any track (composite pads).
* Add get and set position methods to all schematic items.
* Encapsulate schematic item position members.
* Add swap data method to schematic items that lacked one.
* Remove global swap data function used by undo and redo functions.
* Unify as many schematic move methods as possible.
* Remove unnecessary place schematic item methods.
* All schematic items are now moved in the same event handler.
* Fixed bug in hierarchical sheet get menu item string method.
* Make no connect and junction items movable, fixes lp:804048
* Move the hierarchical label connected test into the NETLIST_OBJECT class.
* ERC pin type strings can now be translated.
* Remove unused EDA_DRAW_PANEL attribute from all ERC test functions.
* Add get marker count method to SCH_SCREENS object.
* Redundant header removal.
* Lots of coding style policy fixes.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
Eeschema:
* Graphic texts ans labels: fix fully broken undo/redo code relative to the way undo/redo command
* handles changes (maintly move) for labels
* Fix minor bug for undo command relative to block rotate
* Remove dead code.
* Add new class BITMAP_BASE, and (for Eeschema) SCH_BITMAP to handle bitmap images in schematic.
Remember plot Bitmaps in not possble with all plotters.
* Change the minimum required CMake version to 2.6.4 for all build platforms
except Windows and OSX.
* Move all schematic plot code from plot.cpp into the appropriate schematic
objects.
* Create SCH_SCREEN plot method to plot all objects in the schematic
screen.
* Delete plot.cpp and remove it from the CMakeList file.
* Move code from function ClearProjectDrawList() into SCH_SCREEN object
Clear() method.
* Delete eeschema/delsheet.cpp as none of the code in it is ever called.
* Move global spice and net list command line variables into SCH_EDIT_FRAME
object as priviate members and provide access methods.
* Remove unnecessary header includes from eeschema/sheet.cpp.
* Minor coding policy fixes.
Pcbnew: refresh issue with dialog designe rules under wxWidgets 2.9.2 under WINDOWS (replace wxChoiceBox by wxComboBox, should not change anything for users)
Eeschema: some issues in libedit (when editing a pin )
Also fix a minor zoom page issue in Libedit.
wxMSW, version 2.8.x must be patched.
Some zoom values smaller than 3 to 5 create artifacts on screen, mainly values < 1.
(corresponding to draw scale factor > 1 )
* see http://trac.wxwidgets.org/ticket/9554
This is fixed in version 2.9.x
Workaround: ( that is not a full fix, but remaining artifacts are acceptable )
edit file edit file <wxWidgets>/src/msw/dc.cpp
>> search for line
static const int VIEWPORT_EXTENT = 1000;
>> and replace by
static const int VIEWPORT_EXTENT = 10000;
* Move undo item copy global variable into schematic editor frame object
member variable.
* Add helper methods for accessing the undo item copy member variable.
* Fix undetected bug when changing a text type.
* Added an exchange command to the undo/redo base class for handling undoing
a changed item type which cannot be undone by swapping out the variables.
* Revert change to common/hotkeys_basic.cpp that broke hot key behavior.
* Lots of coding policy changes while making the changes above.
* Change all code references to pin sheet and sheet label to sheet pin to
more closely match the sheet pin object for improved code readability.
* Change menu and tool bar text from pin sheet to sheet pin for improved
user readability.
* Moved sheet pin place method to sheet pin object source file.
* Move last sheet pin stored state information into schematic frame object.
* Add Doxygen comments for the sheet pin editing methods.
* Push schematic back annotation code down into the appropriate class.
* Minor improvements to back annotate file selection code and user prompt
strings.
* Minor tool bar tool tip capitalization fixes.
* Change tool bar ID error from message dialog to a debug assert message.
* Add item clarification context menu to EESchema when multiple unresolved
items are found at the current cross hair position.
* Add collector class SCH_COLLECTOR for supporting multiple item hit testing.
* Removed bit wise masked filtering from schematic item hit testing.
* Removed all old hit testing functions and methods scattered about the
EESchema source code.
* Move terminal point test function into SCH_SCREEN object.
* Fixed bug in terminal point test when terminating a bus to a label.
* Define the < operator for sorting schematic items.
* Add area calculation method to EDA_Rect item.
* Add method for returning an item's bitmap for menu display purposes.
* Add method for returning an item's menu text for menu display purposes.
* Changed EDA_ITEMS container from boost::ptr_vector to std::vector.
* Factor coordinate string conversion code from EDA_DRAW_FRAME to function
CoordinateToString().
* Move locate function code into schematic screen object.
* Move test for junction needed into schematic screen object.
* Move test for marking connected items into schematic screen object.
* Move delete item function code into schematic screen object.
* Move delete all markers code into schematic screen object.
* Add method for locating multiple items in schematic screen object.
* Fix minor bug in schematic field object hit test declaration.
* Initial encapsulation work on item picker object.
* Remove duplicate doxygen comments from item picker object source file.
* CVPcb now uses wxUpdateUIEvent instead of set toolbars.
* Removed duplicate event handlers in CVPcb that were factored into
EDA_DRAW_FRAME.
* Fix definition of GeneralControle() in CVPcb that prevented it from being
called.
* Remove rarely used and scary refresh code GeneralControle() method in all
main frame windows.
* Factor zoom menu and tool bar command IDs down to EDA_DRAW_FRAME.
very minor enhancement in netlist dialog.
Gerbview: remove useless code I wrote specific to Windows in BOARD::Draw() function, because Wayne has fixed the bug.
common_plotPS_functions.cpp: remove a potential bug.
Rename some classes according to coding style policy.
* Remove base screen methods from draw frame object and correct current
screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
position.
* Move poly line ghosting function into the delete current segment method
as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
* Encapsulate file name member of base screen object.
* Encapsulate associated screen member of schematic sheet object.
* Create add screen method to schematic sheet object to simplify setting
the associated screen.
* Move the change file name code in the schematic sheet object to the edit
sheet method in the schematic editor frame object to eliminate message
dialogs.
* Improve reference counting in schematic screen object.
* Add helper type definitions for changing schematic object storage to C++
containers.
* Rename sch_item files to sch_junction.
* Make global variable g_ItemToRepeat a private member of SCH_EDIT_FRAME
object.
* Encapsulate SCH_SCREEN reference count member.
* Change default build to enable wxDC zooming.
* Move sheet label find function into SCH_SCREEN object.
* Move draw screen items function into SCH_SCREEN object.
* Remove redundant page print method from SCH_EDIT_FRAME.
* Add method to hit test for all items in SCH_SCREEN.
* Add method for testing if junction is required in SCH_SCREEN.
* Fix Doxygen waring in help_common_strings.h
* Move update block pick list code to SCH_SCREEN object.
* Remove redundant drawing function RedrawOneStruct().
* Change context menu text "Noconn" to "No Connect".
* Change context menu text "GLabel" to "Global Label".
* Move schematic select block from global variable to SCH_EDIT_FRAME.
* Remove redundant schematic drawing code for eeredraw.cpp.
* Move block select code into SCH_SCREEN object.
* Simpilify block item select code.
* Fix bug in SCH_LINE selection state test.
* Add test to schematic objects for connectability.
* Make copy block items function a private method in SCH_EDIT_FRAME.
Wayne Stambaugh
Antia Puentes
jean-pierre charras
Lorenzo Marcantonio
Moses McKnight
Dick Hollenbeck
Alexander Zakamaldin
Marco Mattila