* Move the preview settings to view and make the menu item work
* Fix bug with preferences menu not displaying on GTK
* Implement quit command and make it similar to the other programs
Fixes: lp:1832139
* https://bugs.launchpad.net/kicad/+bug/1832139
The problem is that wxEVT_CHAR_HOOK doesn’t do the key translation
properly. wxEVT_CHAR does, but we only get to that if we skip the
event at the end of the tool’s event processing loop, which most tools
don’t do. (Selection tools, point editors, pickers, and a couple of
others do skip, which is probably why this didn’t get reported earlier.)
I played around with a couple of ways to fix wxEVT_CHAR_HOOK. Most of
them don’t work, and the few egregious hacks I tried weren't cross-
platform.
So I’m changing it so that most tools now skip at the end of their
event loops. I left out a couple that I felt were high risk (length
tuning, for instance). But there’s still enough risk that I’m 100%
sure it will break something, I just haven’t a clue what.
Fixes: lp:1836903
* https://bugs.launchpad.net/kicad/+bug/1836903
Previously, for instance after modifying preferences or language,
they were rebuilt but the tools state was not set due to a missing call to SyncToolbars() after rebuilding.
Because the pickers are called with an Activate()/Wait() pair, any
usurping tool gets in between the picker handling the cancel (due
to activation) and the picker client doing a PopTool(). The new
tool is therefore pushed before the old tool is popped.
Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907
This removes unused static function in page layout editor, unused
variable in pcb_painter and restors the gcc unitialized fix for
pcbnew's drawing_tool.
This is based on the notion that in Kicad the start and end-points
are far more important (as they usually connect to other segments)
than the center is.
Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.
Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
Also changes the presentation of the string when the checkbox appears
so that the "Changes will be lost" warning isn't hidden by the turndown.
This last part may require conditional compilation as it's undocumented.
Lastly, regularizes the Unsaved Changes strings between the apps.
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
If a tool called something like clearSelection while processing a
MOUSE_CLICK, the SELECTION_TOOL will pass the clearSelection
COMMAND_EVENT because it handles it as a transition, not as an
event. Because m_passEvent is effectively global, the tool manager
would then interpret that as passing the MOUSE_CLICK and we'd end
up processing the click by multiple tools.
Return the EDA_DRAW_FRAME class back to common, whence it came (before it was
duplicated into legacy_wx and legacy_gal). Now there is only one
implementation (the GAL one), it doesn't need to be in a separate library.
This simplifies the dependencies for common lib users.
This is a stop gap fix. It should be possible to use the wxFrame title
string for this but some of the frame windows have appropriated the title
string for configuration file naming purposes which is less than ideal.
Fixes lp:1825977
https://bugs.launchpad.net/kicad/+bug/1825977
When block selecting and dragging in Page Layout editor, multiple items
with the same parent may be selected. We do not want to move them twice
or the block will show with misaligned elements when placed.
Libpolygon can provide its own includes via target_include_dirs PUBLIC.
This means any linking targets do not need to specifiy them manually.
As common requires polygon, the polygon dep is also now no longer
required downstream of libcommon, as it's transisitvely implied
by libcommon's target_link_libraries.
This resolves a circular dependency previously detected and also
simplifies CMakeLists.
The bitmap definitions (BITMAP_DEF and so on) do not
have any dependencies on other libs, including WX. This
means the bitmaps library can be isolated from the other
dependencies.
Common now depends on bitmaps, and libraries that depend
on common can pick it up from the common target_link_libraries,
as it is PUBLIC. This means a lot of targets no longer
need manual bitmap linkage.
This avoids a circular dependency that was previously reported
by static analysis.
Avoiding pulling in WX and other headers into the include
tree of each bitmap .cpp is a huge speed up (around 10x) in
compilation, and the generated static library is also 10x
smaller (20MB vs 200MB)
Add common as a link library to pnsrouter,connectivity.
THese library do still use common code (including bitmaps,
via base_screen.h) and this allows them to pick up the libcommon
includes correctly.
The standard DIM() macro was not typesafe as it happily deferred errors
to runtime that can be caught at compile time. Replacing it with a
generic C++11 constexpr allows for typecasting, comparison and compile
time error checking.
The hotkey name "Help (this window)" does not describe what the hotkey
and associated action does. It displays the current hotkey list, so the
action name should reflect that behavior
- When loading a file from history the users was always asked to discard changes.
- Bitmap items: the PPI setting was not displayed.
- Text items: the PPI setting was displayed.
- Poly items: the Rotation option was not displayed.
Also updates the file menu IDs so that we can actually handle
more than 9 items in the file history.
Also adds configurable file history length to the other gerber
files (zip, drill and job).
Fixes: lp:1745729
* https://bugs.launchpad.net/kicad/+bug/1745729
Primary change is to replace most control/window borders with
AUI pane borders. We implement our own AUI border drawing
routine which avoids the ugly one-pixel white frames around
dark canvasses.
Also increases the signal-to-noise ratio of all the pane
creation code in the various frames.
This also fixes a bunch of bugs where an error during save would
still close the window (rather than cancelling the close action).
Fixes: lp:1785034
* https://bugs.launchpad.net/kicad/+bug/1785034
Step 1 of the g_UserUnit global eradication. This commit includes
basic hookup of hotkeys, units tool-buttons and grid dialogs.
(cherry picked from commit e0500ab)
Unifies the different sections of hotkeys so that we are not storing two
[eeschema] or [pcbnew] sections in two different files.
Previous hotkey definitions are loaded at start if they exist but are
overwritten by the new format, if it exists. Changes to hotkeys save
only in the combined format.
Hotkey editor for each application only shows the hotkeys relevant to
that application.
Fixes: lp:1741757
* https://bugs.launchpad.net/kicad/+bug/1741757
Fixes: lp:1668799
* https://bugs.launchpad.net/kicad/+bug/1668799
When updating toolbars make sure the events are coming from the
toolbar in question (and not the menus which share the same ID).
Fixes: lp:1763563
* https://bugs.launchpad.net/kicad/+bug/1763563
Fixes a bunch of errors:
- libedit and libbrowser would zoom to bounding box but centre on canvas
- libedit, libbrowser and gerbview didn’t take the scroll bars into account
- pcbnew didn’t take scroll bars into account or apply the 10% margin
- appending a board file would re-centre, but not re-zoom
Fixes: lp:1504302
* https://bugs.launchpad.net/kicad/+bug/1504302
Keystroke zoom (F1/F2) always centered the screen, because it
was handled as ID_POPUP_ZOOM_IN event. Mousewheel scrolling
was ok, because it is handled using different event based
on the configuration.
This patch introduces special event ids for keystroke
zooming that are then properly translated to either
ID_POPUP_ZOOM_IN or ID_OFFCENTER_ZOOM_IN depending
on the configuration.
The same issue is fixed for legacy canvas pcbnew.
Fixes: lp:1742567
* https://bugs.launchpad.net/kicad/+bug/1742567
Signed-off-by: Martin Sivak <mars@montik.net>
Major cleanup of many icons (started as a simple effort to tweak libedit and modedit icons)
Ref: https://lists.launchpad.net/kicad-developers/msg32860.html
* Each application icon has been updated
* Consolidated icon "modifiers" across many icons
* Replaced confusing arrows with "load" and "save" icons
* Slight code updates to reference correct icons
* Consolidate multiple representations of single icon type(s)
This is meant as a stopgap for 5.0, with plans to add proper scaled
icons in the 6.0 cycle. A function KiScaledBitmap() is added, which
works like KiBitmap() except it scales the bitmap according to the
calling window's font size. Controls have been added to all the main
applications to let the user select scaling manually (these were omitted
from smaller apps that didn't already have a place to put them).
In addition, in eeschema only, the pixel height of the system font is
shown in the options dialog for diagnostics. This is only for collecting
feedback before 5.0 release from users with different displays and will
be removed.
Improve dialog layout and fix UI policy issues with all of the dialog
boxes in the Gerbview and Pcbnew code paths.
Updated the use of component to footprint where appropriate.
The GTK+ file dialog is case sensitive however it does support regular
expressions. Most of the file dialog wildcards are lower case so only
files with the lower case extensions will show up in the file dialog.
This code adds a method to convert file extensions of any case to the
appropriate (sch -> [sS][cC][hH]) regular expression on GTK+ builds so
all file extension case combinations will show up in the file dialog.
A note to developers: make sure to add a file extension when setting
when setting the default file argument. If you do don't set an
extension, the GTK+ file dialog will happily append the regular
expression as the file extension which is surely not what you want.
There are still a few known places (mostly gerbview) where there are
some complex wildcard code that has not been converted.
Fixes lp:1720542
https://bugs.launchpad.net/kicad/+bug/1720542
- the useless "arrow tool" is removed.
- the "Zoom to selection" tool enable or disable the Zoom to selection (this is a on/off tool)
- When enabled, it can be disabled by the popup context menu, like in others applications.
The zoom window toolbar button is on the right toolbar separated from the
other zoom buttons on the top toolbar. Move the zoom window button to the
top toolbar beside the other zoom buttons.
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas. When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
bitmaps.h was included in nearly every file in the project due to it
being included by base_struct.h
Only about 130 files actually use the XPM definitions defined there, and
many of those already included bitmaps.h themselves, or via
menu_helpers.h. However, touching bitmaps.h would result in over 400
rebuilt files for pcbnew alone.
This commit moves the bitmap-related types like BITMAT_DEF out to a new
header, which is still included by base_struct.h, which is less
avoidable for now, it's it's used in the interface.
The icon list is still in bitmaps.h. This has the side effect that's
it's now easier to automatically generate this file.
Many classes in pcbnew and eeschema needed some functions moved
to the implementaitons from the headers too.
* Add SCH_PLUGIN::Save() for current file format and code for saving all
SCH_XXX objects.
* Add function to SCH_FIELD to get the position of the field in the component
not the position added to the component position which is what GetPosition()
does. This was required because saving the component field expects position
of the field sans the position of the component.
* Remove public members from BITMAP_BASE object and fix all associated
code.
* Fix the never ending coding policy violations found making these changes.
I tried to merge some constants used both in legacy mode and gal mode (which were, before this patch, separate constants).
There is still a serious work to avoid different calculation code for the same text in draw and plot functions.
Work in progress to merge these calculation functions.
* Move add_directory()s in main CMakeList.txt after all find_package()
macros are run so all flags in the main CMakeList.txt are propagated
to the sub-folder CMakeList.txt files.
* Remove commented out include of config.h
* Make the link maps only build on linux as -${TO_LINKER},-cref
-${TO_LINKER},-Map=blah just gives warnings on osx w/ clang
* Make the link maps only build with flag -DKICAD_MAKE_LINK_MAPS is
defined during CMake configuration as they are highly specific.
* Moved the code for setting link maps into the main CMakeList.txt
file to avoid duplication.
* Removed -D__ASSERTMACRO__ from osx as its no longer needed
* Removed a couple of other OSX only things that wouldn't work anyway
* Moved set (BU_CHMOD_BUNDLE_ITEMS) to the main CMakeList.txt as
otherwise it would only work for the KiCad build not the other
applications
* Made KICAD_SCRIPTING_MODULES enable KICAD_SCRIPTING as currently if
you have modules enabled without the scripting base it will on build.
This could be changed to a fatal error saying you need to also enable
scripting but it seems unnecessary.
* Removed duplication of pcbnew.py install code under modules and
scripting since you can't have modules without scripting now
* The resource setting for bitmap2component is too late in the CMakeLists.txt,
and is being ignored. Bitmap2component does not have an icon resource on
Windows. Moving the entire section resolves the issue.
* The other programs only have the mingw special case listed, not the generic
declaration for the resource file so added them.
Ian McInerney
Jeff Young
Michael Kavanagh
jean-pierre charras
Seth Hillbrand
Steven A. Falco
Seppe Stas
John Beard
Wayne Stambaugh
Maciej Suminski
Tomasz Wlostowski
Carsten Schoenert
Jon Evans
Martin Sivak
Oliver
Chris Pavlina
Simon Richter
Kristoffer Ödmark
Bernhard Stegmaier
Fabrizio Tappero
Cirilo Bernardo
Dick Hollenbeck
Wayne Stambaugh
Matthew Petroff
Simon Wells