dd60fd47b2
Cleanup and formatting.
2020-11-23 01:10:08 +00:00
9e9946628a
Go back to arrow cursor on a cancel (or finish).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
2020-11-19 20:09:28 +00:00
bddc97df30
LibEdit -> SymbolEditor
2020-10-31 10:28:21 +00:00
1538d737e7
Split out FILL_T to its own header to avoid spreading eda_item everywhere
2020-10-14 21:51:23 -04:00
558f4b4b51
Add new place cursor, fix cursor hotpoints again
2020-10-10 23:45:21 -04:00
5aa796b5fe
Cleanup compiler warnings
2020-10-10 15:24:35 +01:00
f5e0754f65
Use the setCursor lambda pattern and fix up the initial cursor states
2020-10-07 23:26:14 -04:00
d9485129c8
Implement more context specific cursors using both stock and custom cursors.
2020-10-08 00:50:28 +00:00
f493e270ea
ADDED: Menu option to enable/disable snap to grid
...
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
2020-09-10 20:09:30 -07:00
4026904cc4
Make grid snapping depend on grid visibility
...
Turning the grid view on enables snapping to the grid. Turning it off
removes the snap and allows free draw
2020-09-09 10:18:15 -07:00
173b4ff588
Add snapping to eeschema
...
This generalizes both the SetPosition() function and ORIGIN_VIEWITEM
class away from the pcbnew-centric.
2020-09-09 10:18:15 -07:00
d61b6f965e
Flatten some settings and remove some more globals.
2020-05-23 16:50:33 +01:00
2b6089240a
Change super/subscript syntax to ^{foo} and _{foo}.
2020-04-18 21:04:41 +01:00
9c8941e040
Remove a bunch of globals.
2020-04-16 17:34:46 +01:00
591428b0d9
Remove some problematic global variables.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4121
2020-04-05 16:17:04 +01:00
079423c3cc
eeschema: Remove unused include of eeschema_id.h
2020-01-03 16:04:54 +00:00
49dd5d838c
libedit: Fix inverted Y axis on move command
...
Also clean up some code formatting issues
2019-08-15 20:13:18 +01:00
3cdf88f2c6
CERN copyrights for work packages.
2019-08-14 09:35:15 +01:00
77334628c4
Change default tool behaviour to skip unhandled events.
...
The problem is that wxEVT_CHAR_HOOK doesn’t do the key translation
properly. wxEVT_CHAR does, but we only get to that if we skip the
event at the end of the tool’s event processing loop, which most tools
don’t do. (Selection tools, point editors, pickers, and a couple of
others do skip, which is probably why this didn’t get reported earlier.)
I played around with a couple of ways to fix wxEVT_CHAR_HOOK. Most of
them don’t work, and the few egregious hacks I tried weren't cross-
platform.
So I’m changing it so that most tools now skip at the end of their
event loops. I left out a couple that I felt were high risk (length
tuning, for instance). But there’s still enough risk that I’m 100%
sure it will break something, I just haven’t a clue what.
Fixes: lp:1836903
* https://bugs.launchpad.net/kicad/+bug/1836903
2019-07-26 12:21:24 -06:00
58ca5b71a9
A more robust fix for 36f1d023f0.
...
This one also handles when the events get out-of-order due to them
starting out in the Simulation window and not getting dispatched until
the mouse goes over the Schematic window.
Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907
Fixes: lp:1836544
* https://bugs.launchpad.net/kicad/+bug/1836544
2019-07-15 14:15:24 +01:00
a9c66e15ea
Common-ize EE_ACTIONS::refreshPreview and use it after cursor actions.
...
Fixes: lp:1818667
* https://bugs.launchpad.net/kicad/+bug/1818667
2019-07-05 14:45:15 +01:00
9effd24f3a
Allow move tool to run on top of other tools.
...
Fixes: lp:1784480
* https://bugs.launchpad.net/kicad/+bug/1784480
2019-07-01 22:15:25 +01:00
981072598b
Overhaul cursor code for new tool/action framework.
...
Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.
Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
2019-06-27 22:37:11 +01:00
2f23aa9556
Implement a more robust tool stacking architecture.
...
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
2019-06-27 17:01:31 +01:00
5e40de9357
Clear IS_NEW flag after placing pin so the tool knows we're no longer drawing.
...
Fixes: lp:1834376
* https://bugs.launchpad.net/kicad/+bug/1834376
2019-06-27 00:02:13 +01:00
730b89af6d
Another round of changes for immediate actions.
2019-06-19 18:35:17 +01:00
581b5257e1
One more try getting <ESC>/PopTool behaviour right.
2019-06-18 22:34:31 +01:00
dcbd897a95
Push/pop tools even when selected from the toolbar.
2019-06-18 20:24:15 +01:00
7dd247f1dc
Make better use of TOOL_EVENT parameters.
2019-06-18 20:24:15 +01:00
1f35ec5521
Beware of copying events and losing the m_passEvent flag.
...
Fixes: lp:1833031
* https://bugs.launchpad.net/kicad/+bug/1833031
2019-06-17 14:44:39 +01:00
e6d5110ccf
Implement I18N for ACTIONs.
...
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
2019-06-17 10:45:23 +01:00
6a8e69f9c9
Fix a compil warning.
2019-06-16 09:12:32 +02:00
5610261dce
Immediate-action hotkeys (and context menu actions) for eeschema.
2019-06-15 20:43:51 +01:00
ce1f35a1be
Cleanup some left-over vestiages of the legacy canvas architecture.
2019-06-13 15:51:32 +01:00
a568e70b99
Follow naming conventions.
2019-06-10 23:46:01 +01:00
5e49517781
Move hotkeys to ACTION architecture.
2019-06-10 23:46:00 +01:00
7f1ed30ff5
Move DeMorgan handling to ACTIONs.
2019-06-01 23:03:24 +01:00
d2daab808c
Remove some legacy cursor handling stuff.
2019-05-31 21:54:22 +01:00
323bb0f8e1
Moving PageLayout editor to GAL canvas and modern toolset.
2019-05-24 19:49:09 +01:00
872c8ca37b
Remove a duplicate icon.
2019-05-23 16:21:06 +02:00
67cc2aac2e
Rework Eeschema find/replace for modern toolset.
...
Fixes: lp:1827274
* https://bugs.launchpad.net/kicad/+bug/1827274
Fixes: lp:1827240
* https://bugs.launchpad.net/kicad/+bug/1827240
2019-05-22 21:48:04 +01:00
fbb807f3bb
Move some more menu & toolbar items to modern toolset.
2019-05-16 19:57:06 +01:00
ef5c69167a
Start moving some LibEdit and SchEdit menubar menus to actions.
...
Also includes a bunch of bug fixes that got intermingled.
Fixes: lp:1828826
* https://bugs.launchpad.net/kicad/+bug/1828826
Fixes: lp:1828826
* https://bugs.launchpad.net/kicad/+bug/1828826
Fixes: lp:1828793
* https://bugs.launchpad.net/kicad/+bug/1828793
2019-05-13 21:44:29 +01:00
f602ccd814
Insert EE_TOOL_BASE under SchEdit and LibEdit tools, and fix errant rename scope which clobbered PCBNew's PICKER_TOOL.
2019-05-12 13:47:08 +01:00
7995b5cc3c
Restore selection on abort and undo/redo.
...
Also includes a related bug fix to not create an undo record for
the initial schematic cleanup.
Fixes: lp:1825975
* https://bugs.launchpad.net/kicad/+bug/1825975
2019-05-11 15:38:49 +01:00
86d1592777
Fix bug with re-enting selection main loop.
2019-05-10 19:56:20 +01:00
c1539ae014
Naming changes to reflect sharing between SchEdit and LibEdit.
2019-05-10 19:56:20 +01:00
f3c95ad83c
Clean up the RepeatItem architecture and finish deleting the UndoItem facility.
2019-05-10 19:56:20 +01:00
ea0941cab3
Implement modern tools for LibEdit.
2019-05-10 16:11:57 +01:00
40f41133b3
Move Circle, Arc, Rectangle and PolyLine tools to modern toolset.
2019-05-10 16:11:57 +01:00
Jeff Young
Marek Roszko
Ian McInerney
Seth Hillbrand
jean-pierre charras