Commit Graph

188 Commits

Author SHA1 Message Date
Seth Hillbrand 428e7a900b pcbnew: Prevent aux axis after-image
Grid helper in the router tool is persistent, so remember to turn off
the aux axes after setting.

Fixes: lp:1822577
* https://bugs.launchpad.net/kicad/+bug/1822577
2019-04-01 14:23:46 -07:00
Seth Hillbrand 0de25e557b pcbnew: Adjust drag snapping to avoid start
When dragging, you will seldom want to snap to the original item.  This
commit prevents the "size of track" snap to the original item and
replaces it with an auxilary grid origin for the snap.  This means
effectively that the snap will happen to grid for the original item
unless the cursor is closer to the original item line than it is to the
grid crossing.

Fixes: lp:1820248
* https://bugs.launchpad.net/kicad/+bug/1820248
2019-03-16 20:37:14 -07:00
Tomasz Włostowski 313ebb9dff router: correct walkaround corner case when both ends of the line lie on the hull edge
Fixes: lp:1810935
* https://bugs.launchpad.net/kicad/+bug/1810935
2019-02-03 11:22:18 +01:00
Seth Hillbrand cf6ba6ad94 pcbnew: Get correct end when dragging
The selection for interactive drag uses cursor position  off grid to
choose the element for dragging.  We pass the same value into the start
dragging routine to choose the correct end of the element.

Fixes: lp:1813665
* https://bugs.launchpad.net/kicad/+bug/1813665
2019-01-28 15:16:07 -08:00
jean-pierre charras 31fa3af8d8 Fix a minor I18n issue
Fixes: lp:1811640
https://bugs.launchpad.net/kicad/+bug/1811640
2019-01-14 13:12:20 +01:00
Seth Hillbrand 0a26388901 pcbnew: Break track in edit mode
Enables the ability to break a track into two segments when operating in
the edit mode rather than in router.

Fixes: lp:1779788
* https://bugs.launchpad.net/kicad/+bug/1779788
2018-12-14 09:59:25 -08:00
Seth Hillbrand ff668968f3 pcbnew: Changing the track width while routing
When changing the track width, we need to allow that the track's route
will change based on DRC, so force a move without changing position.

Fixes: lp:1785057
* https://bugs.launchpad.net/kicad/+bug/1785057
2018-11-24 11:52:26 -08:00
Jeff Young f71998b34e Remove repetitive calls to other cancel operations. 2018-11-19 16:03:30 +00:00
Jeff Young 4b493e45eb Don't consider non-tracks when seeing if we can do a router drag.
Fixes: lp:1793979
* https://bugs.launchpad.net/kicad/+bug/1793979
2018-09-23 23:51:13 +01:00
Franck78 009dfa411f Finish track with 'activate router hotkey'
Fixes: lp:1790552
* https://bugs.launchpad.net/kicad/+bug/1790552
2018-09-04 12:08:40 +02:00
Jeff Young c90a3efea2 Change KIDIALOG hashing algorithm to __FILE__ + __LINE__.
Using Title + Message wasn't working for all the dialogs which
did substitutions in the message (which was a lot of them).

Fixes: lp:1789348
* https://bugs.launchpad.net/kicad/+bug/1789348
2018-08-29 23:38:23 +01:00
Jeff Young 95d3336f63 We need the other end of the stick when not yet routing.
Fixes: lp:1781424
* https://bugs.launchpad.net/kicad/+bug/1781424
2018-07-27 14:58:19 +01:00
Jeff Young 7cce283fea Fix diff pair custom values.
Fixes: lp:1782971
* https://bugs.launchpad.net/kicad/+bug/1782971

(cherry picked from commit 53f35a3)
2018-07-22 11:19:17 +01:00
Jeff Young 99db5cb543 Allow for reduced nagging with wider use of KIDIALOG.
(cherry picked from commit c2dd5df)
2018-07-17 15:13:53 +01:00
Jeff Young d5e88f574f Clean up units infrastructure after g_UserUnit removal.
Fixes: lp:1538239
* https://bugs.launchpad.net/kicad/+bug/1538239

(cherry picked from commit 96d7178)
2018-07-17 15:12:36 +01:00
Jeff Young aab97c8385 Consolidate design rules UI.
Implement new Board Setup paged dialog which includes:
  Layers Setup
  Design Rules
  Solder Mask & Paste
  Text & Drawings

Moves line width and text properties to a layer-class-based
system.  Renames unlocked to upright (which also reverses the
logic).

New Edit Text and Graphic Properties dialog which replaces
Edit Footprint Text and adds layer-class-based editing and the
italic, upright and visibility properties.

Adds Import Settings functionality which allows settings to
be imported from another project at page granularity.

Also UNIT_BINDERizes the dialog and adds editing of pcb text.

Fixes: lp:1731952
* https://bugs.launchpad.net/kicad/+bug/1731952

Fixes: lp:1743464
* https://bugs.launchpad.net/kicad/+bug/1743464

Fixes: lp:1664761
* https://bugs.launchpad.net/kicad/+bug/1664761

Fixes: lp:1753362
* https://bugs.launchpad.net/kicad/+bug/1753362

Fixes: lp:1545427
* https://bugs.launchpad.net/kicad/+bug/1545427

Fixes: lp:1753775
* https://bugs.launchpad.net/kicad/+bug/1753775

Fixes: lp:1777692
* https://bugs.launchpad.net/kicad/+bug/1777692

Fixes: lp:1780670
* https://bugs.launchpad.net/kicad/+bug/1780670

Fixes: lp:1519601
* https://bugs.launchpad.net/kicad/+bug/1519601

(cherry picked from commit 3944a5e)
2018-07-17 15:12:34 +01:00
Tomasz Wlostowski f6f726acab router: allow placing tracks/diff pairs without continuing routing by Shift+L-Click
Fixes: lp:1777688
* https://bugs.launchpad.net/kicad/+bug/1777688
2018-06-19 19:30:03 +02:00
Maciej Suminski 583a9c08c0 Remove duplicated PNS TOOL_ACTIONs to display routing settings 2018-06-15 17:12:15 +02:00
Seth Hillbrand 4dd2de9057 pcbnew: Prevent mouse capture after actions
After an action is completed that required the screen to pan when the
cursor reaches the edge of the screen, we should release the cursor to
allow the user to move their mouse without panning.

Fixes: lp:1763860
* https://bugs.launchpad.net/kicad/+bug/1763860
2018-06-13 14:05:32 -07:00
Seth Hillbrand aae30cc7c1 pcbnew: Hotkey minor fixes
- Ordering of Hotkey list by function
- Use Hotkey assignment instead of hard-coded hotkey for length tuning
- Adjust default Length Tuning settings hotkey to CTRL-L so that we
don't overlap with "Lock" (overlaps are not editable)
2018-06-12 14:22:46 -07:00
Seth Hillbrand 2a87117edc Speed load/unload of complex boards
Corrects an error in polyline estimation

Syncs graphics to world PNS by whole layer set rather than
individual layer at a time.

Prevents reloading of full pns TOOL_BASE during reset of tools unless
the tool is being activated.

Fixes: lp:1766626
* https://bugs.launchpad.net/kicad/+bug/1766626
2018-04-28 16:11:07 +02:00
Seth Hillbrand 45d1c19eb7 Add tooltip text to drag options. 2018-04-17 08:59:52 -07:00
Jeff Young d3e7efcd66 Ignore pads when selecting drag candidates in router tool.
Fixes: lp:1747156
* https://bugs.launchpad.net/kicad/+bug/1747156
2018-03-16 18:01:40 +00:00
Jeff Young 3b0a758f97 Ensure router layer is visible.
Fixes: lp:1663556
* https://bugs.launchpad.net/kicad/+bug/1663556
2018-03-16 02:43:17 +00:00
Jon Evans 0d794b20bb Add null check in ROUTER_TOOL::breakTrack() 2018-02-27 08:45:06 +01:00
Jon Evans be8bb24390 Make all new hotkeys editable; label some GAL-only hotkeys
Fixes: lp:1751183
* https://bugs.launchpad.net/kicad/+bug/1751183
2018-02-25 17:57:36 -05:00
Maciej Suminski ed9a14f01d PNS: disable autopanning in case of an error 2018-02-16 11:28:37 +01:00
Maciej Suminski 6afdf1cf87 PNS router: reset forced cursor position
Track dragging forces the cursor position, which is still kept when PNS
router is launched again. It is avoided by resetting the force cursor
position option before running the event loop.
2018-02-14 17:34:32 +01:00
Maciej Suminski 11d8b9ff55 Fix double disambiguation menu when dragging 2018-02-14 15:34:09 +01:00
Jeff Young 1afbfad44a Use "..." uniformly in menus.
See the bug report for some wording changes and a couple of
menu restructurings that were also cleaned up.

Fixes: lp:1597827
* https://bugs.launchpad.net/kicad/+bug/1597827
2018-02-10 17:32:28 -05:00
Maciej Suminski 95864780e2 Fix cursor freezes in GAL
Launching right click context menu overrides the cursor position, so all
actions executed by the tools will be performed in the right click
position. It created an issue, as the overridden cursor settings were
saved into wrong context if there was another tool activated in the
meantime.

Current implementation saves cursor settings for all tools and restores
them once the right click context menu disappears.

Fixes: lp:1745981
* https://bugs.launchpad.net/kicad/+bug/1745981

Fixes: lp:1746507
* https://bugs.launchpad.net/kicad/+bug/1746507
2018-02-02 19:08:05 +01:00
jean-pierre charras 8552f3fedf fix code after renaming files 2018-01-29 22:00:44 +01:00
Jeff Young 3f6af59cac Avoid selection disambiguation menu when possible.
Some actions, such as select trivial connection, don't need the
user to choose which trace at a corner to start from -- either
one will do.  Same for moving a simple trace corner.

Likewise, Edit in Footprint Editor shouldn't ask if you mean the
footprint or the pad.  Obviously it's the footprint.

This change adds a CLIENT_SELECTION_FILTER which allows clients
to do tool- or action-specific filtering of the selection before
the disambiguation menu is run.

It also removes some tool- and action-specific code which was
in the selection_tool and shouldn't have been.

Fixes: lp:1708869
* https://bugs.launchpad.net/kicad/+bug/1708869
2018-01-18 09:09:25 +01:00
Maciej Suminski a13c89c83d Removed old debug output 2017-12-17 18:43:43 +01:00
Seth Hillbrand a63e9b863b pcbnew: Fix multiple delete bug
Delete events when using GAL are handled by only one tool handler
instead of ROUTER_TOOL and EDIT_TOOL both deleting items.

Fixes: lp:1715158
* https://bugs.launchpad.net/kicad/+bug/1715158
2017-12-07 09:31:20 +01:00
Tomasz Włostowski 9932ff32ae refactoring: wrapped boost::optional in OPT<> class for the purpose of easier transition to C++17 in the future 2017-11-03 23:59:02 +01:00
Tomasz Włostowski 20b9ed4897 router: fixed possible use-after-free condition during segment dragging
ratsnest: fixed occasionally disappearing airwires
2017-08-29 18:49:05 +02:00
Tomasz Włostowski 60fdc6229d router: fixed inline dragging & settings dialogs inconsistency 2017-08-22 16:44:58 +02:00
Tomasz Włostowski 2d9ab80b4e Few improvements to the GAL router:
- missing 'break track' functionality
- 'drag 45 degree' and 'drag free angle' context menu shorcuts, both in the router tool and in the default context menu
- bugfix: length tuner tool can now be used again

Fixes: lp:1708386
* https://bugs.launchpad.net/kicad/+bug/1708386

Fixes: lp:1708402
* https://bugs.launchpad.net/kicad/+bug/1708402
2017-08-07 14:28:46 +02:00
Maciej Suminski 76bd05a69b Prevent creating too many transitions by TOOL_MANAGER
- added TOOL_INTERACTIVE::resetTransitions()
- made protected and moved TOOL_BASE::setTransitions() to TOOL_INTERACTIVE
- TOOL_MANAGER calls TOOL_INTERACTIVE::resetTransitions() instead of
setTransitions()
2017-07-31 15:09:19 +02:00
Maciej Suminski 7b88dac4b7 Consistent track removal for PNS and selection tool
Fixes: lp:1705676
* https://bugs.launchpad.net/kicad/+bug/1705676
2017-07-27 16:20:19 +02:00
Fabrizio Tappero deeeed38a1 deleted several redundant icons in right-click menu. The objective is to get to a more uniforme right click menu look
Signed-off-by: Fabrizio Tappero <fabrizio.tappero@gmail.com>
2017-07-21 10:28:42 -04:00
Maciej Suminski 805bfb048b pcbnew: Configurable hotkeys for PNS
- routing options
- custom track/via size
- differential pair dimensions
- increase/decrease via size
2017-06-30 15:46:27 +02:00
Tomasz Włostowski 3cba1007eb Removed legacy connectivity/ratsnest algorithm, replaced with the new one. No legacy autorouting for the moment 2017-06-23 11:12:37 +02:00
jean-pierre charras 6ed4f9b208 Make EDA_DRAW_FRAME::SetToolID and mouse cursor shape setting working in GAL canvases, and uses same mouse cursor shapes in legacy and gal canvases.
Starting fixing incorrect UI behavior of Zoom to selection in Pcbnew.
2017-06-12 15:16:09 +02:00
Jon Evans 3ec28e2acf Refactor layer enumerations to all live in the same place 2017-03-30 16:01:48 -04:00
John Beard 8f3423b803 Add Select Layer And Add Via actions to GAL router tool
On these actions, invoke the layer select dialog and set the via layer
pairs accordingly.

Fixes: lp:1672820
* https://bugs.launchpad.net/kicad/+bug/1672820
2017-03-28 15:13:27 +02:00
John Beard 69115e4b9d Signal via actions with flags, not event equality checking
This allows actions to encode both via type and other behaviours
intrisically witohut having to individually test for each action.
2017-03-28 15:13:24 +02:00
Julius Schmidt 29eb696ef7 Fix crash when switching from dragging to routine (PNS router)
The attached patch fixes a bug where triggering InlineDrag while routing
is in progress will crash pcbnew.  The problem is that the InlineDrag
event does not terminate performRouting.  Once InlineDrag is finished
it will call StopRouting which deletes the m_placer.  The Wait() in
performRouting will then return and it will crash as soon as it tries
to access the m_placer.
2017-03-07 13:56:44 +01:00
Jon Evans fd4e2b042c Refactor SELECTION, SELECTION_CONDITIONS, and context menus to common
SELECTION now holds EDA_ITEMs not BOARD_ITEMs so various places had to
change to casting the selected items to BOARD_ITEMs.

Fixed compilation warnings on clang (Tom)
2017-02-28 14:47:20 +01:00