- Clear object attributes before and after plotting a zone.
It avoid using previously defined object attributes when plotting the next
zone, and using therefore incorrect attributes.
- Add aperture attribute to filled zone solid polygons (regions in Gerber)
From master branch
Depending on where you move the selection, the slow ratsnest might turn
on. This prevents that setting from being sticky, reverting to smooth
movement.
(cherry picked from commit a893d19d26)
Fixes https://gitlab.com/kicad/code/kicad/issues/1909
merging pad shapes when the min width mask is not 0.
Keeping pad shapes clearly identified in Gerber files is mandatory,
so the initial algo that merged shapes in some cases was not good
from this point of view.
both Ucamco and Eurocircuits.
Update message in plot dialog about best solder mask clearance value.
Show a warning message in plot dialog if these values are no 0.
From master branch.
Once the gal canvas hsad the focus, it was not possible to use arrow keys in library
or symbols or fp lists even after clicking on an item.
This focus issue is now fixed.
From the fix in Master
LAYER_VIAS needs to get set for them to print at all, and GetLOD
needs too look at the view layer visibiilties, not the board layer
visibilities.
Also implements a more pad-like strategy for printing blind/buried
vias when printing one layer per page (where the top/bottom arcs
don't make sense).
Fixes https://gitlab.com/kicad/code/kicad/issues/1938
(cherry picked from commit dce42612d3)
Previously, the region was a usual polygon with arc approximated by segment.
Using a region with arcs is a better way because it allows CAM tools to
identify this region as a round-rect pad.
Similar to master branch, commit 9cb3333d05.
When the solder mask min size is > 0, pads are no longer flashed or regions items.
Good Gerber files need pads flashed or regions items.
Non 0 solder mask min size is reserved to special cases (home made PCBs for instance)
From master branch.
In the case where the footprint arc has a non-normal angle, we cannot
represent this in pcbnew and it corrupts the gerber output. Therefore
we drop the invalid arc and continue to load the footprint/board.
Fixes#3918 | https://gitlab.com/kicad/code/kicad/issues/3918
(cherry picked from commit 3e0ff72720)
The commit takes the module edit flag when resetting the tool. All
tools should reset this flag when we setup the Module editor.
This is slightly different in master and v5, so this is a rework of
7bdf71abc
Fixes#3973 | https://gitlab.com/kicad/code/kicad/issues/3973
Commit d7272b7f5e fixed the use of
the eagle DRC to change the library pad shapes. This was also
applied incorrectly to SMD stacks.
Remove the references to m_rules in packageSMD() and the code
that deals with them. eagle 7.7 does not have any SMD pad options
other than rectangle with rounding.
(cherry picked from commit 070c6b8ce0)
When drawing to a scaled DC, the window doesn't reflect the expected
size if scaled after. This causes elements drawn on the edge to reflect
back into the drawing area instead of being cut off.
We can simply scale our own values to avoid this issue.
Fixes#3849 | https://gitlab.com/kicad/code/kicad/issues/3849
(cherry picked from commit 5b6a4d794f)
Previously we call only setlocale( xx, "C" ), but it was not enough on Windows.
Now we call wxLocale("C")
wxLocale calls setlocale, but also make some others initialization in wxWidgets.
It fixes some issues related to comma versus point as fp separator.
Especially wxWidgets warnings are no longer thrown, and a one case of incorrect
conversion is fixed.
However, wxLocale( "C" ) also switches the current translations to English, so
loading files can have a slightly different behavior
The preferred list isn't actually in use anymore at this point, so
it currently has no effect other than to mess things up since we
aren't keeping track of which modules have been rejected when we
check the module count.
Fixes https://gitlab.com/kicad/code/kicad/issues/3721
(cherry picked from commit d02c0da3ab)
(From master, commit 8f3e8cf)
Sometimes a dxf curve is a "degenerated" bezier curve having only 3 points.
(a control point is at same location as a end point)
This commit fix incorrect import of these curves.
Fixes#3845https://gitlab.com/kicad/code/kicad/issues/3845
Move vector should not affect start/end points as they are assumed to
always be 0,0. Polygon is defined by outline only.
(cherry-picked from 32674ef360)
The new line collision search uses BBox() to check for colliding
objects. BBox in the SHAPE_LINE_CHAIN did not include width as the
chains were assumed to be zero-width. This is not the case for
PNS::LINE elements.
We mostly don't notice this because DRC checks for SEGMENT collisions
but it becomes obvious/annoying when we cannot place a track for unknown
reasons and the snap-back doesn't take line width into account.
Fixes#3776 | https://gitlab.com/kicad/code/kicad/issues/3776
(cherry picked from commit fe15511d38)
When routing where we hit multiple obstacles, we choose the shortest
path to allow overlapping hits to choose the shorter path, thus giving a
better chance of returning true for the DRC-compliant path.
Fixes#3773 | https://gitlab.com/kicad/code/kicad/issues/3773
(cherry picked from commit 38f13ef481)
It happens on Windows, and wxWidgets 3.1.3. It is created by
PNS_TUNE_STATUS_POPUP instance used in tool. I am pretty sure this crash is
created by the stack switching when managing events, due to some changes in
wxWidgets code.
The fix creates the instance on the heap, instead of on the stack.
This is not the first time I see this kind of issue.
From master, commit 21dd8db
Previously, if a SMD pad was round, itb was seen as BGA pad.
But this is not always true. so use always SMD PAD attribute,
until an explicit BGA pad attribute is added in Pcbnew
The IFACE for kicad refers to the board hidden state, not the
temporarily hidden state used by the router. We allow snapping to items
that have been removed by the temporary router state to provide snapping
to original track location.
Fixes#1827 | https://gitlab.com/kicad/code/kicad/issues/1827
Happens when right clicking on an item in displayed lists.
The crash was due to a bug in wxWidgets, and the fix is only a workaround
From commit 5cd7f3fd in master branch.
Also remove duplicate code.
Pad ratsnest settings set to global settings during initilization.
Fixes: lp:1848488
* https://bugs.launchpad.net/kicad/+bug/1848488
(cherry picked from commit 29ce76b4e4)
(slightly modified due to settings structure difference between
master and 5.1)
The aperture option created a Connector pad only on the paste layer.
This is incorrect: the SMD type only is acceptable.
Connector is *only* for edge card connectors.
Moreover, The dialog did not even accept the setting defined by this dialog...
In high contrast mode, the holes of buried vias and microvias were no darkened when not on the active layer.
In high contrast mode, the outer circle of buried vias and microvias were alway darkened.
In high contrast mode, when the selected layer is non visible through-vias are now darkend.
Fixes: lp:1844982
* https://bugs.launchpad.net/kicad/+bug/1844982
(cherry picked from commit 04edc6ceff)
We want to avoid selecting items that are disabled in the item list.
Our standard method is in the GetViewLOD() that performs both size and
visibility. This extends the check to module text and via.
Fixes: lp:1851133
* https://bugs.launchpad.net/kicad/+bug/1851133
In Python3, all division operators promote integers to floats. We need
to downcast back to integer for the polygon vertices.
There was also an unhandled overflow in the QR generation that allowed
more than 512 bits to be loaded. This overflows the type of QR we
generate, so this truncates the input string to 62 bytes ( leaving 12
bits for the checksum )
Fixes: lp:1850223
* https://bugs.launchpad.net/kicad/+bug/1850223
(cherry picked from commit 9bccbaf497)
The oval clearance adds an edge on the 0-length side of a circular oval.
This is not needed and can affect the fill algorithm. Instead, we treat
round ovals as circles for pad polygons
Fixes: lp:1849846
* https://bugs.launchpad.net/kicad/+bug/1849846
The constrained draw was constraining the polygon size to fit the
existing points rather than extending the existing points to fit the
user's intent.
This adds a 90° double-joint for the completion polygon that allows the
user to complete common constrained polygons visually based on the
preview with a double-click to finish.
(cherry picked from commit bae50fab9f)
Fixes: lp:1849299
* https://bugs.launchpad.net/kicad/+bug/1849299
BLOCK elements in DXF are re-usable bits that are useful when editing
the file but should not be shown when importing the model. This skips
all references except those that exist in the default "*Model_Space".
This block is required in each DXF file and cannot be renamed.
Fixes: lp:1790821
* https://bugs.launchpad.net/kicad/+bug/1790821
(cherry picked from commit df3fabfa21)
jean-pierre charras
Frank Severinsen
Seth Hillbrand
Jeff Young
Michael Kavanagh
Jon Evans
Ian McInerney
Ben Dooks
easyw
qu1ck
Fabien Corona
Seth Hillbrand