* The board ratsnest visibility state was being saved in both the board file
and the Pcbnew configuration files causing visibility state issues. Use the
board file to save the board ratsnest visibility state.
* Remove all of the board ratsnest save visibility state to configuration file
code.
* Add code to set the board modified property when layer visibility states
change to give the user a chance to save the state in the board file.
* Some minor code cleaning and coding policy fixes.
* Make the about dialog help string consistent across all menus.
* Improve print preview window and print initialization error messages.
* The usual smattering of coding policy fixes.
* Add skip event to notebook page changed event handler. Apparently OSX
updates the selected notebook page in this event instead of the page
changing event used on Window and Linux.
* Improve duplicate net class name error message.
* Use default dialog size to allow sizers to do their job.
* General layout and sizer improvements.
* Remove HTML message window which could not be used when error dialog was displayed.
* Use wxStdDialogButtonSizer for the OK and Cancel buttons.
* Check for design rule validity in TransferDataFromWindow() to prevent dialog from being
closed and all new design rules being lost when an error is detected. This gives the user a
chance to fix any design rules errors before dismissing the dialog.
* Add missing test for extra via drill diameter violations.
* Remove unnecessary OK and Cancel butten clicked event handlers.
* Rename Eda_FileSelector to EDA_FILE_SELECTOR.
* Add optional pointer to wxString to save the most recently used path to EDA_FILE_SELECTOR.
* Rename Eda_DirectorySelector to EDA_PATH_SELECTOR.
* Replace wxGetCwd() with wxStandardPaths::GetDocumentsDir(). This fixes the windows issue
where wxGetCwd() returns the path where the executable files are located.
* Add code to handle most recently used path to EDA_BASE_FRAME.
* Fix string formatting error in kicad/files-io.cpp.
* Remove setting and restoring current working directory when launching GerbView. Setting the CWD
has no effect on the launched executable which starts with it's own CWD.
* Allow project path to be passed to GerbView when launched from KiCad.
* Note: this is a work in progress. Do not expect every path and/or file selection dialog to properly
update the most recently used path. The correct solution to this problem requires a much more
well though out solution which will not happen until after the next stable release.
* UI capitalization policy fixes.
* Set OK button as the default.
* Use default dialog size to allow sizers to do their job.
* Minor grammar and abbreviation string fixes.
* Make OK button the default in the copper zones properties dialog.
* Change the set global text edit properties menu entry so that is describes
what the dialog actually does.
* Make the clean up tracks and vias menu entry description more accurate.
* Track the last used path for the current session.
* Set focus back to OK button after wxFilePickerCtrl button is pressed to change file path
and/or file name so next return key press fires OK event.
* Use default dialog size to let the sizers set initial dialog size.
* Add spacer to improve layout when resizing dialog.
* Use colons for consistency with other dialogs.
* Use default size to allow sizers to determine dialog size.
* Use "segment" rather than abbreviation "segm".
* Use width and height to describe text instead of X and Y.
* Add spacer to improve layout when resizing dialog.
* Use colons consistently in labels.
* Use default dialog size to allow sizers to size dialog.
* Fix control alignment and spacing consistency.
* Add spacer to improve layout when resizing dialog.
* Make control spacing and alignment consistent.
* Use default dialog size and to allow the sizers to do thier job.
* Add colons to per item labels for consistency.
* Fix error message box title capitalization per UI policy.
* Remove hard coded dialog size and let the sizers do their job.
* Minor UI policy text fixes.
* Minor text changes to improve readability.
* Minor tool tip changes to improve readability.
PAD_SHAPE_T and PAD_ATTR_T still have a double definition (new names and old names) to be sure python scripts are nor broken by the change.
PAD_DRILL_SHAPE_T does not have a double definition, because it is unlikely oblong holes are used in python scripts.
Double definitions will be removed in the (next) future.
* The exchange dialog can be now called from the footprint popup menu.
* It can be (as before) called from the footprint properties menu, but in this case, the footprint properties menu is closed before calling the exchange menu.
* Changes in exchange dialog to avoid truncation of long FPIDs
* Changes in exchange dialog to make some texts translatable (Previously, the same English sentence was used in very different contexts)
* Cleanup namespace in enum ZoneConnection in pcbnew/zones.h to self-explained names unification: PAD_ZONE_CONN_INHERITED, PAD_ZONE_CONN_NONE,PAD_ZONE_CONN_THERMAL,PAD_ZONE_CONN_FULL, PAD_ZONE_CONN_THT_THERMAL
* Adds a "Grid Reference Point" to the VRML export; this allows a user to specify the (X,Y) coordinate which will be the origin point on the output
* Adds a "Grid Reference Point" to the IDF export; this is similar in purpose to the corresponding VRML export feature.
* Replace module nomenclature with footprint for improved consistency.
* Replace abbreviations in control text.
* Replace exchange nomenclature with change.
* Add code to allow each editing window it's own undo/redo count.
* Add code to allow for infinite undo/redo when count is set to 0.
* Add edit control to all editing windows general options dialog for
user configuration of undo/redo count.
* Add code to save and restore undo/redo count for each editing window.
* Clean up formatting and make OK button the default in the array dialog.
* Make the OK button the default in the move exact dialog.
* Change the directory picker control from wxGenericDirCtrl to wxDirPickerCtrl so the native
directory picker dialog is used to select the directory in the select pretty library path dialog.
* Make the OK button the default in the select pretty library path dialog.
Fix also an issue on Windows, when using the footprint viewer or the component viewer in modal mode:
Reason: these frames (when run under the Kicad manager) have the Kicad manager as parent, and were built with wxFRAME_FLOAT_ON_PARENT style.
On windows, when the frame with style wxFRAME_FLOAT_ON_PARENT is displayed its parent frame is brought to the foreground, on the top of the calling frame.
and stays displayed when closing the frame in modal mode.
This issue does not happen on unix so we use now wxSTAY_ON_TOP on Windows, and wxFRAME_FLOAT_ON_PARENT on unix to simulate a dialog called by ShowModal.
This is not perfect, but at least it works.
added the example gen_gerber_and_drill_files_board.py in demos, which shows how to do that.
Fix a Printf format issue (shown in Debug mode) in Libedit (%d used for a size_t, changed in %zu)
Fix a i18n issue in field names when loading a component, if the language was changed during a session, and kicad not restarted (see Bug #1448654).
However changing the language needs restarting kicad, in order to have all messages or menus translated.
* Use "Close" in the file menu of every main frame window instead of the
mismatch of the terms "Close", "Exit", and "Quit".
* Change the terminology in the Pcbnew graphic text edit dialog to match the
module text edit dialog.
* Improve the layout of the Pcbnew graphic text dialog.
* Fix some wxPrintf parameter type assertions for 64 bit time_t.
* Fix all (at least I think I got all of them) duplicate menu accelerator
characters.
legacy plugin: better compatibility with old brd files (current track width and current vias size, stored in SETUP section, were not read from file and incorrectly set)
* Fix default KISYSMOD/KISYS3DMOD (#ifdef typo) for OSX builds.
* Remove setting KIGITHUB from kicad/pcbnew Info.plist in favor of hardcoded default
setting for OSX builds.
* Remove now unneeded Set3DShapesDefaultPath() and other small things.
Text arrays can now use "%s" as a placeholder to be substituted with the array index.
Also expand menu options for move exact, arrays and duplicate.
Minor fixes for arrays - use proper unit parsing, add numbering start for circular arrays
Add circle radius indicator to array dialogue
These settings are now not common to the board editor, because the footprint editor can be run outside the board editor.
download_boost.cmake: ignore .htm* files when installing boost. They are not used, and often have a very very long (and stupid) name which sometimes creates issues.
* if the current select plugin is the github plugin, one can select some of these libraries and add them to the table
* if the current select plugin is the kicad plugin, one can select some of these libraries and download them to make alocal copy.
They can added to the table after they are downloaded.
* Make generate button the default in Eeschema netlist dialog.
* Fix spacing issues in export IDF dialog.
* Make OK button the default in export IDF dialog.
* Remove unnecessary end dialog code from export IDF dialog.
* Improve resizing of export IDF dialog.
this option was possible only by modifying the way display options are managed.
before these changes, display options were a global DISPLAY_OPTIONS class instance.
Now each EDA_DRAW_FRAME(and derivated classes) includes its own DISPLAY_OPTIONS class instance.
As a consequence, some duplicate display option variables in these classes have been removed, because there were just duplicate variables of the DISPLAY_OPTIONS class instance.
jean-pierre charras
Wayne Stambaugh
Stefan (stol)
Maciej Suminski
Simon Richter
Cirilo Bernardo
unknown
Chris Pavlina
Jon Neal
Ruben De Smet
unknown
Tomasz Wlostowski
unknown
Nick Østergaard
Sven D.
unknown
Blair Bonnett
Bernhard Stegmaier
John Beard