Commit Graph

38 Commits

Author SHA1 Message Date
Jon Evans e59a3d981e Implement a new settings framework across all of KiCad
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme

Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
2020-02-19 23:44:56 -05:00
Mark Roszko 11ff16be4e Switch to scoped enums 2019-12-20 14:11:39 +00:00
jean-pierre charras 577fbc6156 PCBNew: fix issue with keepout area in board editor.
Not able to draw a keepout-area on bottom or internal layers.
This was due to a behavior specific to the footprint editor,
not disabled in board editor.

Fixes: lp:1852847
https://bugs.launchpad.net/kicad/+bug/1852847
2019-11-16 13:01:48 +01:00
jean-pierre charras 1c2891e6d4 Fp editor: allow internal layers in footprint keep-out zones Especially: Enable one internal layer to manage keep-out areas only on internal layers Allowing one internal layer is a trick to manage these keep-out areas (visibility and selection) In fact this internal layer groups all internal layers enabled is these keep-out areas. 2019-10-29 11:24:57 +01:00
Seth Hillbrand 77cefe0c16 Normalize line endings
A few files snuck in with CRLF for the line endings.  These make it hard
to look at diffs as every line appears to have changed.  This commit
makes only line ending changes, so can be ignored
2019-06-19 15:18:30 -07:00
Wayne Stambaugh 4612175da2 Pcbnew: better fix for dialog default button handler issues.
Use DIALOG_SHIM::SetInitialFocus() to fix default button handler issue
on all platforms.  Commit cabc33b4 only fixed the problem on windows.
2019-03-04 15:30:32 -05:00
Wayne Stambaugh cabc33b4cd Pcbnew: fix dialog default button handler issues.
Set the focus to some control in the copper zone, non-copper zone, and
keep out zone dialogs required for the default button action to work
properly.  This only seem to affect windows dialogs.

Fixes lp:1818397

https://bugs.launchpad.net/kicad/+bug/1818397
2019-03-04 11:34:04 -05:00
Jeff Young 7dfc4e30e4 Add some debugging statements to find out what's up with GTK. 2018-07-21 23:17:46 +01:00
Jeff Young 833e0b3c0f One more attempt to get the layers list width right on GTK.
Fixes: lp:1782766
* https://bugs.launchpad.net/kicad/+bug/1782766
2018-07-21 14:44:01 +01:00
Jeff Young 92dcf43ae8 UNIT_BINDERize zone dialogs.
Also includes a bunch of changes to simplifiy the terminology
and unify the copper, non-copper and keepout versions.

Also removes some legacy features:
Removes contol for fill method.  If the fill method is currently
segments the dialog will ask if you want to convert to polygons
on OK.
Removes control of boundary resolution.  We've done this with trig
since 5.0.

(cherry picked from commit 487aaeb)
2018-07-17 15:11:32 +01:00
Jeff Young c23b263e39 Fix display issues in Layers list in Keepout Zone Properties. 2018-05-04 23:55:03 +01:00
jean-pierre charras b43dc7954c fix code after renaming files 2018-01-30 15:34:09 +01:00
jean-pierre charras 8552f3fedf fix code after renaming files 2018-01-29 22:00:44 +01:00
jean-pierre charras c536364f05 Fix a few coverity warnings. very minor other changes. 2017-11-02 18:18:57 +01:00
jean-pierre charras 1ec7fef4a2 fix a wxASSERT in dialog_keepout_area_properties.cpp 2017-10-16 13:58:36 +02:00
jean-pierre charras 54d34c341b Cleanup code 2017-09-28 08:38:36 +02:00
jean-pierre charras b4a59eb96d Fix minor issues in DIALOG_KEEPOUT_AREA_PROPERTIES.
Fix keepout zone creation in legacy canvas.
Add a comment in lset.cpp
2017-09-27 16:54:28 +02:00
Oliver Walters 42be6bb966 Improved keepout zone properties dialog
- Checkboxes next to layers
- OK button is disabled if no layers are selected
2017-09-27 10:35:00 +02:00
Oliver Walters 0f6ec7632b Enable multi-layer for keepout zones
- Load / save from PCB file correctly
- Doesn't display properly yet
- Keepout only actually applies to one layer (for now)
2017-09-27 10:34:59 +02:00
Tomasz Włostowski 32185ddcd3 Multiple improvements concerning colors, configuration handling and legacy features in pcbnew:
- support for background color setting
    - removed several global config settings (such as g_Drc_On)
    - wrapped most of global config settings in PCB_GENERAL_SETTINGS class
    - reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
    - new GAL feature for legacy users: double-click (or E) to change track width available as an option.

Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543

Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
2017-08-04 16:06:57 +02:00
Jon Evans 3ec28e2acf Refactor layer enumerations to all live in the same place 2017-03-30 16:01:48 -04:00
Alejandro García Montoro f68ce306bd CPolyLine -> SHAPE_POLY_SET refactor.
Removes the need of using the legacy code in polygon/PolyLine.{h,cpp},
refactoring all CPolyLine instances with SHAPE_POLY_SET instances.

The remaining legacy methods have been ported to SHAPE_POLY_SET;
mainly: Chamfer, Fillet, {,Un}Hatch.

The iteration over the polygon vertices have been simplified using the
family of ITERATOR classes.
2017-03-24 10:43:47 +01:00
Jon Evans a52250a91e Change from EDA_COLOR_T to COLOR4D globally; arbitrary color support
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas.  When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
2017-02-22 17:35:00 +01:00
jean-pierre charras e10242a0a9 Minor changes in dialogs: use wxWidgets default event handlers for wxID_CANCEL and wxID_OK buttons 2016-07-19 19:44:28 +02:00
jean-pierre charras 014f0eb61f Gerber file X2 attribute: Change the attribute Project Id key word from .TF.JobId to .TF.ProjectId, due to a change between the draft Gerber file format specif and a the final specifs (Revision 2015.08).
Remove a few wxCHECK_VERSION conditional compilation, now useless.
2015-10-14 09:20:28 +02:00
Wayne Stambaugh 1831b2329a Pcbnew: minor keep out zone properties dialog fixes.
* UI capitalization policy fixes.
* Set OK button as the default.
* Use default dialog size to allow sizers to do their job.
* Minor grammar and abbreviation string fixes.
2015-09-21 11:36:13 -04:00
jean-pierre charras 764369439e Add comments. Fix bug #1351507 (pad color does not reflect, whether the pad is on front or back layer) and bug #1351388 (Adding a keepout area appears on the opposite layer than selected) 2014-08-02 12:29:10 +02:00
Dick Hollenbeck ad750defb6 LAYER_ID work 2014-06-29 08:05:51 -05:00
Dick Hollenbeck 4578ea8b9e 1) Add 32 Cu Layers.
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
   The old Cu stack required knowing the count of Cu layers to make
   sense of the layer number when converting to many exported file types.
   The new Cu stack is more commonly used, although ours still gives
   B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
   meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
   can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
   You will need to convert to the format immediately, *.kicad_pcb and
   *.kicad_mod (=pretty) since legacy format was never going to know
   about 32 Cu layers and additional technical layers and the reversed Cu
   stack.
2014-06-24 11:17:18 -05:00
Dick Hollenbeck 2c67c3ff80 * KIWAY Milestone A): Make major modules into DLL/DSOs.
!   The initial testing of this commit should be done using a Debug build so that
    all the wxASSERT()s are enabled.  Also, be sure and keep enabled the
    USE_KIWAY_DLLs option.  The tree won't likely build without it.  Turning it
    off is senseless anyways.  If you want stable code, go back to a prior version,
    the one tagged with "stable".

*   Relocate all functionality out of the wxApp derivative into more finely
    targeted purposes:
    a) DLL/DSO specific
    b) PROJECT specific
    c) EXE or process specific
    d) configuration file specific data
    e) configuration file manipulations functions.

    All of this functionality was blended into an extremely large wxApp derivative
    and that was incompatible with the desire to support multiple concurrently
    loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
    An amazing amount of organization come from simply sorting each bit of
    functionality into the proper box.

*   Switch to wxConfigBase from wxConfig everywhere except instantiation.
*   Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
    PGM_SINGLE_TOP,
*   Remove "Return" prefix on many function names.
*   Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
*   Fix building boost for use in a DSO on linux.
*   Remove some of the assumptions in the CMakeLists.txt files that windows had
    to be the host platform when building windows binaries.
*   Reduce the number of wxStrings being constructed at program load time via
    static construction.
*   Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
    these functions are useful even when the wxConfigBase comes from another
    source, as is the case in the KICAD_MANAGER_FRAME.
*   Move the setting of the KIPRJMOD environment variable into class PROJECT,
    so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
*   Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
    its child wxFrames and wxDialogs now have a Kiway() member function which
    returns a KIWAY& that that window tree branch is in support of.  This is like
    wxWindows DNA in that child windows get this member with proper value at time
    of construction.
*   Anticipate some of the needs for milestones B) and C) and make code
    adjustments now in an effort to reduce work in those milestones.
*   No testing has been done for python scripting, since milestone C) has that
    being largely reworked and re-thought-out.
2014-03-19 19:42:08 -05:00
Dick Hollenbeck 1c0f034bca Make KiCad compile with minimal warnings against SVN HEAD of wxWidgets as of today. 2014-01-07 19:34:04 -06:00
Lorenzo Marcantonio 9fd79dfa91 Implemented the LAYER_NUM typedef (LAYER was already taken as a class name...) to represent a layer number. 2013-03-31 15:27:46 +02:00
jean-pierre charras 019d1364d3 Pcbnew: fix issue in zone keepout dialog: layers not displayed on Linux, and minor changes 2013-03-25 19:48:07 +01:00
jean-pierre charras 8d61cd0e5b Pcbnew: fix issue in zone keepout dialog: layers not displayed on Linux 2013-03-25 18:02:29 +01:00
jean-pierre charras 372ce6595a Very minor changes in dialog zones. 2013-03-25 14:37:48 +01:00
Lorenzo Marcantonio e771112259 Enforced EDA_COLOR_T type and minor const-ification 2012-09-02 14:06:47 +02:00
jean-pierre charras f20bf0d217 Pcbnew: more about keepout areas: remove keepout for pads option and add keepout for copper zones option.
Export keepout to Specctra DSN file.
2012-07-14 18:27:25 +02:00
jean-pierre charras 018b080001 Pcbnew: Add keepout areas (Copper zones without tracks or/and vias).
This is *a work in progress*, so some features are missing, and/or could be modified.
Mainly keepout zones are not yet exported to autorouters, and pads are not taken in account.
Some code cleanup in polygon.*
2012-07-13 20:55:29 +02:00