Commit Graph

37 Commits

Author SHA1 Message Date
Jeff Young 08fb05e522 Make sure HPGL and DXF drill map generators honour origin setting.
ADDED: also adds origin setting to Footprint Position File dialog
and generators.

Fixes https://gitlab.com/kicad/code/kicad/issues/8669
2021-06-27 17:40:20 +01:00
jean-pierre charras 5d9ff0b9b7 Step export dialog: save 2 options in config file.
2 options (overwrite file and replace 3d shapes) were not saved previously.
2021-06-15 09:33:37 +02:00
Seth Hillbrand f274a00c08 Remove PYTHON_* compile options 2021-06-01 20:18:24 +00:00
Wayne Stambaugh 54e18f6b1f Pcbnew: remove update schematic option for geographical annotation dialog.
REMOVED: Update schematic option from geographical annotation dialog due
to potential issues with incomplete and/or broken updates.  Use "Update
Schematic from PCB" tool to update reference designation changes.

Forcing the footprint reference designator changes back to the schematic
without checking any other board changes in the schematic could leave the
schematic in a undefined state.  The update schematic from board tool is
the correct method to sync any changes from the board.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/8042
2021-04-22 12:45:59 -04:00
Jeff Young 176fcd43d8 Cleanup. 2021-04-10 10:04:02 +01:00
Roberto Fernandez Bautista 7077e59395 Make moving pads independent of footprint much harder with new setting
It is still possible to move a pad independent of footprint through
the pad properties dialog. This is a much more conscious decision
than using the move tools.

ADDED: "Allow free pads" preference setting in pcbnew, default to off.
When enabled, allows moving unlocked pads independent of the footprint
(i.e. previous behaviour). When disabled (default), any attempt to move
a pad will move the parent footprint instead.

REMOVED: "Lock pads of newly added footprints" preference setting in
pcbnew. (Pad lock state is now loaded from the footprint definition)

CHANGED: There are now only two possible lock states for a footprint:
locked and unlocked. The lock state of the pads in the footprint is
now independent of the footprint lock state.

Also fixed a latent bug that would allow a pad to be moved when the
parent footprint was locked (see m_selectionTool->RequestSelection
lambdas in edit_tool.cpp)

Fixes https://gitlab.com/kicad/code/kicad/-/issues/7739
2021-03-31 18:28:18 +00:00
Roberto Fernandez Bautista f6c4677189 ADDED Option to disable automatic zone filling in pcbnew
The new setting is stored as 'editing.auto_fill_zones' and controls
whether zones should be refilled after certain actions or not.
2021-03-21 20:13:20 +00:00
jean-pierre charras af88b01068 export_vrml: Better export of pad shapes, both on copper and paste layers.
It removes duplicate code between Pcbnew and the vrml exporter.
Remove also an useless option (plain board) that exported just the board body.
2021-03-18 20:43:27 +01:00
jean-pierre charras 074f0432f0 vrml exporter: more cleaning code and enhancements. Dialog exporter: Add option to use board center as coord origin. 2021-03-18 09:52:04 +01:00
Jon Evans aedc65f20f Fix footprint editor default grid
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7659
2021-02-23 20:07:46 -05:00
Jon Evans 6fa0ac45af Re-enable custom grid settings for Pcbnew
Add a reset button that will only show up if the user
edits the JSON configuration for grids. This is a temporary
measure until we have a real grid editor GUI in V7.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/7595
2021-02-21 15:33:13 -05:00
Seth Hillbrand 81b83a8f5b Remove unused line width parameter 2021-02-07 17:11:05 -08:00
Seth Hillbrand 624a231cc0 Remove unused line width option
You had to set the line width in the SVG export dialog in order to
change the displayed line width in the 3d viewer.  The line width did
not affect the SVG export.  Removing in favor of the Board design
settings for line widths
2021-02-06 06:44:53 -08:00
Seth Hillbrand c09dc5abdd Prevent locking items in footprint editor
Adding footprints to the board now has a preference for whether we want
pads locked or unlocked by default
2021-01-11 11:23:26 -08:00
Marek Roszko 39fe89096e Allow specifying the DXF file units on import
There is no guarantee DXF contains $INSUNIT to specify the units of the file as its optional.
This allows the user to specify the expected units via dropdown.
SolidWorks can definitely generate such unit lacking files as an example
2020-11-22 15:39:37 -05:00
Jeff Young 522d64968e Yet more module -> footprint. 2020-11-13 15:16:24 +00:00
Salvador E. Tropea 61fb271957 Rename the `plot.one_page_per_layer` option to avoid cconfusion.
Now named `plot.all_layers_on_one_page` as @craftyjon suggested.
In this way a `1` means that all layers will be printed to the same page.
Fixes #5633
2020-11-10 18:21:22 +00:00
Jeff Young 115fd1d7f3 Move track-to-zone testing to RTrees.
Also implemente pad-to-zone testing and removes the control in the
GUI (now that it's fast).
2020-10-31 15:45:41 +00:00
Jeff Young 9c6977a994 Remember mirror setting in print dialog.
Fixes https://gitlab.com/kicad/code/kicad/issues/5909
2020-10-08 14:15:10 +01:00
Ian McInerney 481026e901 Move microwave tools into a group on the main drawing toolbar
ADDED: Drawing group for microwave tools on main drawing toolbar
REMVOED: Microwave toolbar no longer exists
2020-10-01 19:47:55 +01:00
jean-pierre charras 4cda653dbd dialog_drc: fix a minor issue when saving dialog drc options.
Fixes #5623
https://gitlab.com/kicad/code/kicad/issues/5623
2020-09-14 17:45:39 +02:00
Mark Roszko a9532c2fa1 Add browse button to footprint 3d settings
Add normalization to 3d settings and footprint library table editor
2020-09-01 02:00:38 +00:00
Jon Evans 96f4e8f6f8 Remember the last active tab on the appearance panel
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5216
2020-08-17 22:06:31 -04:00
Jon Evans 54682d39ff Remember width of right AUI panel in PcbNew 2020-08-16 14:33:40 -04:00
Jeff Young 5ab39b7c06 Clean up reannotation UI. 2020-08-11 15:02:27 +01:00
bjpiccioni d08bf90576 ADDED: Geographic Reannotation 2020-08-09 12:43:05 -04:00
Seth Hillbrand 51d7fea934 Separate Cleanup Via from Cleanup Track
There are cases where you will want to keep vias that only connect to
one layer but still want to cleanup tracks.  As distinct entities, they
are given their own checkboxes and actions

Fixes https://gitlab.com/kicad/code/kicad/issues/5019
2020-07-30 21:22:33 -07:00
Jon Evans c0175c48af ADDED: Setting to control track mouse drag behavior
Default is now to perform a 45-degree drag
2020-06-21 15:39:39 -04:00
Jeff Young ad12c42e8b Push grid settings dialogs down into common.
This also gives support for fast grid switching and a user grid
to eeschema.

Fixes https://gitlab.com/kicad/code/kicad/issues/2200
2020-06-14 19:26:37 +01:00
Jeff Young f84406009b Push a couple of layers of indirection out of grid settings. 2020-06-13 11:35:56 +01:00
Ian McInerney 4ecf99e7c8 Give the footprint viewer a toolbar and remove the options dialog
CHANGED: Cvpcb fpviewer and the pcbnew fpviewer no longer have an options dialog
ADDED: Add a side toolbar to the pcbnew footprint viewer (and the measure tool)

This also cleans up some of the settings structs in the viewers, since
it was somewhat confusing before.

Fixes https://gitlab.com/kicad/code/kicad/issues/2205
2020-05-24 11:58:33 +01:00
Ian McInerney 6692935808 Consolidate common viewer actions across cvpcb and pcbnew frames
* Consolidate the measure tool into one tool (this gives cvpcb
  unit changing and snapping capabilities in its measure tool)
* Transition cvpcb to use actions for the sketch modes
* Replumb how magnetic items settings are stored and used
2020-05-24 11:58:33 +01:00
jean-pierre charras 62852e18e1 Pcbnew, DIALOG_UPDATE_PCB: store "Re-link footprints" option in config 2020-05-05 15:20:54 +02:00
Jeff Young 0894674869 Save severities settings in the DRC dialog.
Fixes https://gitlab.com/kicad/code/kicad/issues/3978
2020-03-04 21:52:30 +00:00
Jon Evans 9cc5b4b3f9 Fix management of nested settings for PNS 2020-02-27 22:53:00 -05:00
Jon Evans 1a216f3703 Change action plugin settings storage to preserve hidden buttons 2020-02-20 11:01:49 -05:00
Jon Evans e59a3d981e Implement a new settings framework across all of KiCad
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme

Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
2020-02-19 23:44:56 -05:00