Some grid/zoom tools are left in PCBNEW_CONTROL because they currently
depend on Pcbnew-specific class members. Once refactoring is done to
make it possible to use all zoom and grid controls outside of pcbnew,
these last tools can be moved to common to match their ACTIONs.
New virtual class ACTIONS is added as a member to EDA_DRAW_FRAME so
that the TOOL_DISPATCHER can have access to the appropriate derived
version of TranslateLegacyId()
bitmaps.h was included in nearly every file in the project due to it
being included by base_struct.h
Only about 130 files actually use the XPM definitions defined there, and
many of those already included bitmaps.h themselves, or via
menu_helpers.h. However, touching bitmaps.h would result in over 400
rebuilt files for pcbnew alone.
This commit moves the bitmap-related types like BITMAT_DEF out to a new
header, which is still included by base_struct.h, which is less
avoidable for now, it's it's used in the interface.
The icon list is still in bitmaps.h. This has the side effect that's
it's now easier to automatically generate this file.
Many classes in pcbnew and eeschema needed some functions moved
to the implementaitons from the headers too.
The apply settings and push settings options now take account of the
validity of the global pad settings when deciding whether to show or
not.
Global pad push now requires a source pad and doesn't push from the
global pad setting when there is no selection.
The whole submenu is hidden when there are no enabled items.
Fixes: lp:1664016
* https://bugs.launchpad.net/kicad/+bug/1664016
This allows the user to set a thicker grid line without causing the
grid lines to become over dense, or just make the grid denser according
to preference.
The term "density" is modified to "minimum grid spacing", which is
the pixel spacing between adjacent grid lines.
The spacing settings now comes in along, with other GAL display settings,
as part of GAL_DISPLAY_OPTIONS observer functionality. To this end, the
setter in GAL interface is removed, as an external user should be
setting this parameter via the GAL_DISPLAY_OPTIONS interface.
This adds a user-settable control for the grid line thickness on GAL
canvases to the display options dialog.
The thickness settings now comes in, along with other GAL display
settings, as part of GAL_DISPLAY_OPTIONS observer functionality. To this
end, the setter in GAL interface is removed, as an external user should
be setting this parameter via the GAL_DISPLAY_OPTIONS interface.
Fixes: lp:1662482
* https://bugs.launchpad.net/kicad/+bug/1662482
This class, INCREMENTAL_TEXT_CTRL, is used to provide a frameworks for
classes that want to control a text control that can be incremented
according to some scheme.
Also provided is a wxWidgets implementation with spin buttons for
control, as well as mousewheel support.
The mappings from enums to control settings can be done in static
functions, which makes the set/retreive functions more concise, and also
puts the mapping functions in a clearly delineated place.
This puts the graphical/display options with the other similar options
in that dialog, rather than with the dimension options found in the Set
Grid dialog, which is in the Dimensions menu.
Also place the option itself in the GAL Display Options structure, so it
can be updated using the observer mechanism there.
The setter for the style in the GAL interface is removed, as the public
interface for setting this option is now to modify the
GAL_DISPLAY_OPTIONS structure and notify the GAL when done.
The GAL_DISPLAY_OPTIONS member of EDA_DRAW_FRAME is a private member and
is used in only a couple of places in the class. The real use of this
member is by a by-ref interface, GetGalDisplayOptions.
Because te GAL options are used by a very select few users of
EDA_DRAW_FRAME, it makes little sense to force all the (many) files
including draw_frame.h to also include gal_display_options.h, when the
vast majority have no need for it.
This massively speeds up compilation of the project when
gal_display_options.h is changed.
More isolation could be acheived by separating the GAL config types (eg
OpenGL antialias modes and grid style) from the options header, as,
although the GAL class uses them, not many includers of the GAL header
need the options struct as well.
This commit brings several changes:
- Add a footprint preview pane to the eeschema component selector
- Upgrade component list to wxTreeListCtrl
- Factor out wxTreeListCtrl subclass TWO_COLUMN_TREE_LIST which
patches a column size bug
- Linkify datasheet URL in info pane
This patch fixes a problem with GAL where zones are ignored in ratsnest
calculation.
The problem is that calling RN_DATA::Update on a zone with no polygons
(an unfilled zone) will remove the zone successfully, but then
RN_DATA::Add is a no-op.
From this point on, because ::Update refuses to work on items that have
not been ::Add'ed, the zone is removed entirely from ratsnest
calculation and will only be reconsidered once it is explicitly ::Add'ed
again.
The fix is to explicitly create an empty RN_ZONE_DATA object for every
zone that is ::Add'ed.
A second problem is that the point editor forgot to call
RN_DATA::Recalculate after calling Fill_Zone.
Fixes: lp:1537120
* https://bugs.launchpad.net/kicad/+bug/1537120
When attempting to read a pcad file exported from Altium, kicad was
segfaulting because it was trying to access an empty array. This patch
fixes that.
The reason the array was empty was the the board outline in the pcad
file was composed of only arcs and the plugin only processes lines in
the board outline. Adding this functionality is for another patch I
suppose.
Signed-off-by: Clemens Koller <cko@embeon.de>
Modifies the selection menu to be adaptive and disable selection options
that are not possible.
Adds a new selection option that is only available when selecting
modules, this tool will select all footprints on the same sheet level or
belonging to subsheets. It will also search for nets that are only
connecting between modules on the same sheet or lower and select every
segment and via belonging to it.
This action launches the normal interactive zone tool, but re-uses the
settings from an existing zone, based on a flag passed to the main zone
function.
Break a chunk of the new zone tool out into a separate function to keep
the code clear. When zone cutouts and similar zone tools are added,
they'll get the settings from existing zones.
This commit now used std::unique_ptr for the temporary zone item, which
simplifies handling of the ownership of that item.
This commit wires up the as-yet-unused "remove alternate" tool action
and uses it to select copper connections (normally 'U') before deleting
segments.
THis also reverses the sense of Delete and Backspace (Delete used to be
'remove' and Backpace was 'remove alt', now it is reversed). This means
that backspace is the key that removes a segment and Delete removes the
track. This is the same as legacy behaviour. Other delete actions are,
for now, the same between Delete and Backspace.
Fixes: lp:1517213
* https://bugs.launchpad.net/kicad/+bug/1517213
The previous behaviour was to act on only the first item in the
selection. The new behaviour is to act on every eligible item (in this
case, tracks and vias).
Provide a visual feedback to the user how each rotation
will affect the routing by immediately reflecting the
change in ratsnest orientation.
Signed-off-by: Aurabindo J <mail@aurabindo.in>
Fixes: lp:1663488
* https://bugs.launchpad.net/kicad/+bug/1663488
The attached patch fixes a minor bug where opening the 'View' menu
will sometimes revert the canvas to the default canvas. The problem is
that wxMenuItem::Check will cause a menu event when the status is changed even
if the checkmark is being *unset*. The workaround is to only call Check with
a true argument. This works because the menu items are radio buttons.
This makes "rotate" into two separate TOOL_EVENTs, which each have a
"multiplier" parameter.
Also added is a namespace for 'free functions' that use TOOL_EVENT
public interfaces (perhaps with other inputs too) to centralise some
decision-making and calculations.
Fixes: lp:1660731
* https://bugs.launchpad.net/kicad/+bug/1660731
Automatically switch to a drawing layer, if a copper layer was
preselected. No annoying message boxes.
Do not deactivate the tool on layer switch.
Replaced setting updatePreview with direct calls to VIEW::update
Line width is kept in m_lineWidth for all shapes.
Arc centres don't land in the bounding box when the arc angle is small.
Currently, there are added to the BB, which leads to surprising
selection beheviour of arc segments (the BB can be much larger than
expected).
This commit omits the arc centre from the calculation.
Fixes: lp:1492734
* https://bugs.launchpad.net/kicad/+bug/1492734
Import becomes apply and export becomes copy.
The term "push" to apply settings globally has not been renamed.
Swap the order of the copy and apply in the context menu.
Perviously, the generic snapping code would choose the nearest of the
module origin and origin of each module pad when selecting a module
using the "Find module" tool (T hotkey).
This is unlikely to be expected unless the cursor is already near the
correct pad or the module centre.
New behaviour is to pick up by module origin first, then
select the module. This means that the cursor is already nearest the
main module origin anchor, so that is what will be used.
Fixes: lp:1571214
* https://bugs.launchpad.net/kicad/+bug/1571214
If a line has zero thickness, use the outline thickness to draw it.
This avoids having invisible items on the PCB that could still end up in
outputs, or "losing" an item by setting thickness to 0.
This only affects GAL drawing routines, the PCB data structures are not
affected, so any outputs will be the same.
Fixes: lp:1501749
* https://bugs.launchpad.net/kicad/+bug/1501749
- Move Select All buttons, after discussion in IRC found that numerous
users are unclear on exactly what those buttons would do. The <<< in
them was an attempt to associate them with a listbox, but in reality
created an association in the user's mind with the above "move" actions.
- Spacing, punctuation adjustments
DIALOG_EXCHANGE_MODULE class now has its own header file in the
pcbnew/dialogs directory, and the xchgmod.cpp files was moved along with
it. This has two aims:
* (minor) Standardise the location of "base dialog" derived classes,
like most other dialogs in KiCad.
* (major) Allow inclusion of this dialog class into both legacy-mode
pcbframe.cpp and into GAL tools.
Setfocus now works on macos dialogs by setting DLGSHIM_USE_SETFOCUS.
This option is only enabled __WXMAC__ is defined.
FixOSXCancelButtonIssue() is now called inside DIALOG_SHIM::SHOW.
All other calls from within the dialogs were removed.
Add some consts to "getters" in this class.
Remove const from return type of static return-by-value getter - this
has no effect on the caller except disabling move operations and forcing
copy operations.
This implements the pad import/export to the board's master pad setting
in the GAL canvases.
Implemented as a new GAL tool: PAD_TOOL.
It uses the same dialog, which has been split out into its own files in
pcbnew/dialogs, rather than along with frame methods in
pcbnew/globaleditpad.cpp.
Fixes: lp:1619304
* https://bugs.launchpad.net/kicad/+bug/1619304
Make all EDA_TEXT data private and rename accessors to avoid function
name collisions in derived classes.
Overload EDA_TEXT's SetTextAngle() and SetEffects() in TEXTE_PCB.
Add support for preserving Reference text position, size, orientation
during a netlist import into a BOARD, as well as the one off footprint
update dialog.
This plugin mechanism is enabled only if option -DKICAD_SCRIPTING_ACTION_MENU=ON (it is off by default)
It imply -DKICAD_SCRIPTING=0N
This is currently for testing purposes only for developers, not yet for users.
There is nothing PCB-frame-specific about this function,
it is equally applicable to an frame, for example
PCB_EDIT_FRAME and CVPCB_MAINFRAME, which have EDA_BASE_FRAME
as the nearest common ancestor, except KIWAY_PLAYER,
which is not really concerned with this kind of UI event method.
When creating a copy of CONTEXT_MENU, always a CONTEXT_MENU instance was
constructed, whereas an inherited type should be used. Solved with
CONTEXT_MENU::create() that has to be overridden in inheriting classes.
Event & update handlers are now virtual functions, instead of setting
the handlers with Set{Event,Update}Handler().
Jon Evans
Chris Pavlina
John Beard
Dick Hollenbeck
Maciej Suminski
jean-pierre charras
Julius Schmidt
hauptmech
Kristoffer Ödmark
Jean-Samuel Reynaud
Aurabindo J
Maciej Suminski
Nick Østergaard
Wayne Stambaugh
Diogo Condeco