02eb1d2c62
Don't try and run drawing tools in ModEdit with no module selected.
...
Fixes: lp:1836673
* https://bugs.launchpad.net/kicad/+bug/1836673
2019-07-19 15:29:10 -06:00
b4fc78fc0d
kicad_plugin.cpp: fix incorrect detection of existing footprints in PCB_IO::FootprintExists(), when fp names contain a point.
...
Fixes: lp:1837221
https://bugs.launchpad.net/kicad/+bug/1837221
2019-07-19 18:16:07 +02:00
58ca5b71a9
A more robust fix for 36f1d023f0.
...
This one also handles when the events get out-of-order due to them
starting out in the Simulation window and not getting dispatched until
the mouse goes over the Schematic window.
Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907
Fixes: lp:1836544
* https://bugs.launchpad.net/kicad/+bug/1836544
2019-07-15 14:15:24 +01:00
f2f2b4bcf9
Explode/Combine in terms of visible elements
...
When generating a complex pad, this allows the user to combine with a
rotated pad and explode rotated pads without needing to rotate elements
to 0 orientation first.
Fixes: lp:1808137
* https://bugs.launchpad.net/kicad/+bug/1808137
2019-07-12 16:55:41 -07:00
9effd24f3a
Allow move tool to run on top of other tools.
...
Fixes: lp:1784480
* https://bugs.launchpad.net/kicad/+bug/1784480
2019-07-01 22:15:25 +01:00
2f23aa9556
Implement a more robust tool stacking architecture.
...
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
2019-06-27 17:01:31 +01:00
f9702aab87
Immediate actions for PlEditor, PcbNew, etc.
2019-06-25 11:34:28 +01:00
aaa7661b94
Check that there's something selected in the tree before exporting.
...
Fixes: lp:1833295
* https://bugs.launchpad.net/kicad/+bug/1833295
2019-06-18 21:50:53 +01:00
e6d5110ccf
Implement I18N for ACTIONs.
...
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
2019-06-17 10:45:23 +01:00
19aba615c2
Remove selection condition from conditional menu separators.
...
We don't allow duplicate separators anyway so all they really do
is complicate the code.
2019-06-15 20:43:51 +01:00
8f84c3ec4f
Grid rid of GetCanvas/GetGalCanvas distinction now that there's only gal.
2019-06-13 19:58:37 +01:00
ce1f35a1be
Cleanup some left-over vestiages of the legacy canvas architecture.
2019-06-13 15:51:32 +01:00
31ee95c683
Reconcile tool and menu for Enumerate Pads.
...
Fixes: lp:1831950
* https://bugs.launchpad.net/kicad/+bug/1831950
2019-06-10 23:46:01 +01:00
5e49517781
Move hotkeys to ACTION architecture.
2019-06-10 23:46:00 +01:00
765606012f
Convert separate-compilation of selection.cpp to polymorphism.
2019-06-10 23:46:00 +01:00
e606587ff6
Move remaining Symbol Tree ctx menu cmds to ACTIONS.
...
Also moves the various Player instantiators down into COMMON_TOOLS
for better sharing.
2019-06-10 23:46:00 +01:00
2d40425e4d
Move footprint & symbol tree context menus to tool infrastructure.
...
Fixes: lp:1831692
* https://bugs.launchpad.net/kicad/+bug/1831692
2019-06-05 20:16:48 +01:00
1ea5b04e22
More ACTIONS work. Nearly done now.
2019-06-04 22:31:42 +01:00
1bf04d1722
More ACTIONs work.
2019-06-04 00:51:16 +01:00
3912c7407f
Move global commands to ACTIONs.
...
Also fixes a crash bug opening Edit Tracks and Vias dialog.
2019-06-03 21:08:30 +01:00
9163ac543a
pcbnew: Move pads to std::deque
2019-06-01 16:23:54 -07:00
d1877d7c1b
Moving modules from DLIST to std::deque
2019-06-01 09:53:23 -07:00
67cc2aac2e
Rework Eeschema find/replace for modern toolset.
...
Fixes: lp:1827274
* https://bugs.launchpad.net/kicad/+bug/1827274
Fixes: lp:1827240
* https://bugs.launchpad.net/kicad/+bug/1827240
2019-05-22 21:48:04 +01:00
fbb807f3bb
Move some more menu & toolbar items to modern toolset.
2019-05-16 19:57:06 +01:00
f602ccd814
Insert EE_TOOL_BASE under SchEdit and LibEdit tools, and fix errant rename scope which clobbered PCBNew's PICKER_TOOL.
2019-05-12 13:47:08 +01:00
f7c042a357
pcbnew: Allow curves in custom pads
...
Updates custom pad functions to permit adding arbitrary curves to the
primitives
2019-05-08 15:54:26 -07:00
4247e32cd6
pcbnew: Disallow new via where DRC is violated
...
Prior to placing the via, we check if the resulting via will pass too
close to different nets on different layers.
Fixes: lp:1718827
* https://bugs.launchpad.net/kicad/+bug/1718827
2019-01-23 10:20:59 -08:00
a1d1354bcc
footprint_editor_tools.cpp: Better code in Placepad.
2019-01-21 21:33:37 +01:00
4d88cd3a0a
Footprint editor: add missing local coordinate initialization in Add Pad.
2019-01-21 21:03:36 +01:00
8b5127d9bc
modedit: Renumber pads should hold removed numbers
...
When renumbering pads, you can click on a pad the second time to restore
the pad to its original value. This did not allow a user to then place
the removed number on the correct pad (assuming a mistake). This commit
ensures that removed pad numbers are remembered and allow the user to
place in the correct pad.
2019-01-17 09:58:22 -08:00
6b1b4bb43a
pcbnew: Add cursor help to renumber pads
...
Renumber pads command is abstruse so add a small popup help to guide
users when renumbering.
2019-01-17 09:58:22 -08:00
5bb5aea936
Don't leave a selection with a deleted item in it.
...
Fixes: lp:1803730
* https://bugs.launchpad.net/kicad/+bug/1803730
2018-11-19 16:03:30 +00:00
5b9458f4c2
Don't delegate context menu to Selection Tool.
...
Our superclass can handle it more correctly (including the Cancel
item at the top).
2018-11-19 16:03:30 +00:00
f17c18bcce
Remove AdvanceDepth() hacks in favour of proper layers.
...
Also removes the bounding-box cache since the last big merge
should have sorted out the Update(GEOMETRY) calls.
Fixes: lp:1797271
* https://bugs.launchpad.net/kicad/+bug/1797271
Fixes: lp:1797268
* https://bugs.launchpad.net/kicad/+bug/1797268
Fixes: lp:1797075
* https://bugs.launchpad.net/kicad/+bug/1797075
2018-10-21 15:55:56 +01:00
e79e2f0175
Remove properties flag from via placer so single-click mode works.
...
Fixes: lp:1796769
* https://bugs.launchpad.net/kicad/+bug/1796769
2018-10-10 10:59:50 +01:00
db712ea643
Footprint editor: display a warning when trying to created a custom pad shape with a Bezier curve.
...
Currently, Bezier curve (S_CURVE shape) is not supported in a custom pad shape.
2018-07-22 18:39:48 +02:00
bfc70c8208
Fix an issue in footprint editor, "Create Pad from Selected Shapes" command.
...
If the initial pad was a custom pad converted in a usual pad + graphic items by the command:
"Explode Pad to Graphic Shapes"
the "old" primitives were not cleaned, and the new created pad contained these old primitives, regardless the new selected shapes.
(Usual case when a user want to edit a custom shape)
2018-04-24 17:00:29 +02:00
f2bb398ae6
pcbnew: fixes in primitives->custom pad tool
...
Fixes: lp:1753712
* https://bugs.launchpad.net/kicad/+bug/1753712
Fixes: lp:1753711
* https://bugs.launchpad.net/kicad/+bug/1753711
2018-03-06 14:59:15 +01:00
48459e4268
pcbnew: fixes in custom pad creation tool
...
Fixes: lp:1753152
* https://bugs.launchpad.net/kicad/+bug/1753152
2018-03-06 14:59:15 +01:00
3b085f0d03
Pcbnew new menubar structure
2018-02-18 11:27:52 -05:00
de72ef8518
Fix code after renaming files
2018-02-16 20:27:57 +01:00
a889cd7cde
rename files
2018-02-16 20:27:55 +01:00
Jeff Young
jean-pierre charras
Seth Hillbrand
Tomasz Włostowski
Michael