Commit Graph

102 Commits

Author SHA1 Message Date
Jeff Young 7c83c78afe Allow free pad usage in router.
Fixes https://gitlab.com/kicad/code/kicad/issues/11730
2022-09-06 13:59:52 +01:00
Seth Hillbrand 0cb5abd7f7 Fix highlight on route again
Added a clarifying comment that will hopefully keep the required code
block in place
2022-07-08 20:14:46 -07:00
Tomasz Wlostowski 0bd7f603a3 router: consider mouse drag event a valid route start/end event
L-clicks during routing operation while the mouse is moving (even slightly) were ignored, which was annoying to some users (myself included). Now the router
always fixes the track upon mouse click.
2022-06-03 23:28:41 +02:00
Jeff Young a54bbfe12b Honour prime-event-location when starting router.
Fixes https://gitlab.com/kicad/code/kicad/issues/11239
2022-03-29 13:44:40 +01:00
Jeff Young 4225f92573 Slight improvements to via drawing.
Fixes https://gitlab.com/kicad/code/kicad/issues/8717
2022-03-16 14:56:32 +00:00
Jeff Young b2e3f03222 More wide-string declarations. 2022-02-05 22:03:04 +00:00
Jeff Young 5e4a704155 Remove some more duplicated preferences.
Fixes https://gitlab.com/kicad/code/kicad/issues/10112
2021-12-26 13:37:28 +00:00
Tomasz Wlostowski 965ab42938 router: when dragging segments, don't snap to other segments on the same layer. Fixes drag flickering for short segments.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9720
2021-12-15 01:48:04 +01:00
jean-pierre charras 302c5ab537 Fix an issue created by commit 9e3362d1.
the issue was the graphic cursor was locked on the first snap point
in route mode, once a snap point is found.
2021-11-21 15:37:03 +01:00
Jeff Young 9e3362d14c Snap mouse point before picking startItem.
Fixes https://gitlab.com/kicad/code/kicad/issues/9700
2021-11-20 13:44:16 +00:00
Wayne Stambaugh 78e5e98ea0 Pass VECTOR2I objects by reference instead of on the stack. 2021-07-27 08:41:27 -04:00
Wayne Stambaugh cf00319c85 More NULL expunging. 2021-07-20 07:27:18 -04:00
Jon Evans 3475d0cebd PNS: Grab start item based on clearance if no direct hits found
Fixes annoying "routing start point violates DRC" messages when
entering the router from the hotkey and not directly over a track.
2021-06-06 14:57:52 -04:00
Marek Roszko 4df3cb912d Remove another leaky wx/log.h header 2021-06-03 08:11:15 -04:00
Jeff Young 5c9a73aa5e Correct position for grid even when we're not snapping to a point.
Fixes https://gitlab.com/kicad/code/kicad/issues/8125
2021-05-25 21:57:19 +01:00
Jeff Young 7356f9568d Move grid disable modifier from ALT to CTRL.
Also had to move the H/V/45 disable modifier from CTRL to SHIFT.

Fixes https://gitlab.com/kicad/code/kicad/issues/8124
2021-05-09 20:17:40 +01:00
Jon Evans 6b24abac8f PNS: Don't snap to end items if snapping is disabled by modifier key
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8033
2021-04-04 10:22:23 -04:00
Jeff Young 8be213e36f Trim includes (and use consistent terminology in error messages). 2021-03-21 20:15:47 +00:00
Jon Evans 720147d272 Remove transitive inclusion of bitmaps.h 2021-03-07 16:08:57 -05:00
Jon Evans b96bcc86b1 Don't restrict start item to same layer if snapping is enabled
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7276
2021-01-25 21:19:26 -05:00
Jeff Young 68efdb2fff Push shared parts of GRID_HELPERs into common. 2021-01-16 23:18:10 +00:00
Jeff Young 7cb2d19814 Honour alt-means-disable-grid-snapping in router.
Fixes https://gitlab.com/kicad/code/kicad/issues/6679
2020-12-11 13:11:47 +00:00
Jeff Young 7b347d793b Change gears on no-connect net generation. See bug rpt.
Fixes https://gitlab.com/kicad/code/kicad/issues/6534

Fixes https://gitlab.com/kicad/code/kicad/issues/6615
2020-12-04 18:25:48 +00:00
Jeff Young f2ac6fcd44 Treat net 0 items as each being in their own net.
Fixes https://gitlab.com/kicad/code/kicad/issues/6534
2020-12-02 20:05:47 +00:00
Jeff Young d06d35a74d Formatting. 2020-12-02 20:05:47 +00:00
Jeff Young ce3b2921bd Sort potential start candidates by distance from cursor.
Fixes https://gitlab.com/kicad/code/kicad/issues/1926
2020-11-10 23:50:57 +00:00
Jeff Young 843974b0bf Cleanup and formtting. 2020-10-31 15:50:06 +00:00
Marek Roszko 9656bd310b Remove eda_item and gr_basic from eda_text.h 2020-10-13 22:46:39 -04:00
Jeff Young f8875bc5a6 Move std::contains to alg::contains. 2020-09-26 14:42:40 +01:00
Jeff Young d7e80f8008 Add std::contains() to simplify a lot of code. 2020-09-26 12:40:32 +01:00
Seth Hillbrand f493e270ea ADDED: Menu option to enable/disable snap to grid
You can now enable and disable snap to grid when drawing/editing across
all apps.  You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
2020-09-10 20:09:30 -07:00
Jeff Young 7cd8f710b6 Clean up unused includes. 2020-08-08 16:25:30 +01:00
Jon Evans 5d118b0700 More visibility settings infrastructure
ADDED: Three-state high contrast mode action
ADDED: Save contrast mode in local settings

Also some initial infrastructure for layer presets
2020-07-11 21:59:07 -04:00
Jeff Young 2cfd6ba978 Fix a couple of integer overflows. 2020-07-02 22:52:37 +01:00
Jeff Young 47ab7c78a6 Divorce GRID_HELPER from the parent frame.
This moves GRID_HELPER fully into the tool framework.
2020-06-13 22:44:16 +01:00
Jon Evans c7daf8a8f3 ADDED: Cross-probe highlighting of bus members
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
2020-05-24 13:30:23 -04:00
Ian McInerney 6692935808 Consolidate common viewer actions across cvpcb and pcbnew frames
* Consolidate the measure tool into one tool (this gives cvpcb
  unit changing and snapping capabilities in its measure tool)
* Transition cvpcb to use actions for the sketch modes
* Replumb how magnetic items settings are stored and used
2020-05-24 11:58:33 +01:00
Jon Evans 51eac3e3e6 Split pcbnew and footprint editor settings getters for clarity 2020-05-05 21:46:00 -04:00
Jon Evans 9cc5b4b3f9 Fix management of nested settings for PNS 2020-02-27 22:53:00 -05:00
Seth Hillbrand 8c19b4b6ae pcbnew: Adding arcs to PNS
This is allows ARCs in tracks to be synchronized with
the PNS router.  Note this does not yet include the UI components
to route curved traces
2020-02-21 16:11:41 -08:00
Jon Evans e59a3d981e Implement a new settings framework across all of KiCad
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme

Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
2020-02-19 23:44:56 -05:00
Jeff Young 88eab8134e Fix a couple of uninitialized variables (from Coverity scan). 2020-01-11 00:11:31 +00:00
Ian McInerney 5d46e721e5 pcbnew: Cleanup includes of pcbnew_id.h
* Remove unused IDs from the enum
* Remove the include statements from files that no longer need it
2020-01-03 15:39:05 +00:00
Seth Hillbrand c6f5df134c Minor speed cleanup
This adjusts iterators to use const reference when only used for
copy.  It also ensures pre-allocation of vectors when size is known
ahead of time.
2019-12-05 14:20:59 -08:00
Seth Hillbrand 6625d0721e Implement Get/Set display options
The pointer passing for display options is deprecated.  This removes the
excess casting as the EDA_FRAME didn't need the base call with no value.
All requests for display options are now returned const and are updated
with a Set() routine after modification.

In Gerbview, this resolves an issue where the display options were not
stored because it was receiving the NULL from EDA_FRAME.
2019-11-07 08:26:44 -08:00
Seth Hillbrand cecfeea947 pcbnew: Remove snapping to hidden items
Items and layers that are hidden in the view should not be used as snap
points.  This happens in multiple locations:
1) Grid Helper for normal tools
2) TOOL_BASE::snapToItem for router

Resolves KiPro Issue #116

Fixes: lp:1833128
* https://bugs.launchpad.net/kicad/+bug/1833128
2019-10-10 09:37:25 -07:00
Seth Hillbrand aa875e5830 PNS: Don't allow routing on hidden layers
If the layer is not shown, we should not be allowing it's items to be
selected and chosen as the start/end items in the router.

(cherry picked from commit fc1fb7a590)
2019-08-15 12:40:05 -07:00
Jeff Young e785c140b9 Eradicate globals for PCB_GENERAL_SETTINGS.
Fixes: lp:1832896
* https://bugs.launchpad.net/kicad/+bug/1832896
2019-06-26 21:54:03 +01:00
Jeff Young 5e49517781 Move hotkeys to ACTION architecture. 2019-06-10 23:46:00 +01:00
Jeff Young c1298570cb Remove legacy routing options. 2019-06-01 16:29:12 +01:00