Now these parameters are stored in user config, not project config ( they are not really related to a given project, they are just a setup during an edition),
and the schematic editor and the component editor have now separate parameters, because they are separate editors with different constraints.
component editor: repeat pin enhancement (from and idea of Edward Johns)
Move items rework: enhancements: for some items (sheets, components, bus entries) the mouse cursor is no more wrapped to the anchor. For large symbols, this is better: they are more easy to place.
There is also a change when starting a move item command: the full screen is redraw, and therefore there is no artifact due to the XOR draw mode.
Some other minor coverity fixes (uninitialized members).
* move not shared files (sch_item_struct.*, sch_base_frame.h) to eeschema;
* move wxEeschemaStruct.h to eeschema and rename it schframe.h to be consistent with the other corresponding file name schframe.cpp;
* remove few not needed #include
was simply a pointer to an object on the display list. At times this object
would disappear from the display list, in the test case because of a concatonation
of two wires, and if you then tried to clone the non-existent object you'd get a
crash. This was not merely a bug, but a naive design choice. IMO.
Now the item to repeat is cloned, so will never also be on the display list.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
In most case the assignment to null was not necessary since it was easily provable that the (local) variable wouldn't have referenced after that anyway.
* Complete encapsulation of the MODULE class.
* Complete encapsulation of the EDA_TEXT class.
* Encapsulate most of the ZONE_CONTAINER class.
* Add pcbcommon library as a dependency for reSWIGging the scripting
support. This should cover most dependency cases.
* Convert Eeschema from manually linked list to DLIST for storing
SCH_ITEM objects.
* Add helper functions to SCH_SCREEN for appending list of SCH_ITEM
objects.
* Fix bug in wire editing code for accurate undo/redo behavior.
* Add member to DLIST to append another DLIST.
* Other minor code cleaning.
* Add get and set position methods to all schematic items.
* Encapsulate schematic item position members.
* Add swap data method to schematic items that lacked one.
* Remove global swap data function used by undo and redo functions.
* Unify as many schematic move methods as possible.
* Remove unnecessary place schematic item methods.
* All schematic items are now moved in the same event handler.
* Fixed bug in hierarchical sheet get menu item string method.
* Make no connect and junction items movable, fixes lp:804048
* Move the hierarchical label connected test into the NETLIST_OBJECT class.
* ERC pin type strings can now be translated.
* Remove unused EDA_DRAW_PANEL attribute from all ERC test functions.
* Add get marker count method to SCH_SCREENS object.
* Redundant header removal.
* Lots of coding style policy fixes.
Eeschema:
* Graphic texts ans labels: fix fully broken undo/redo code relative to the way undo/redo command
* handles changes (maintly move) for labels
* Fix minor bug for undo command relative to block rotate
* Remove dead code.
* Add new class BITMAP_BASE, and (for Eeschema) SCH_BITMAP to handle bitmap images in schematic.
Remember plot Bitmaps in not possble with all plotters.
* Move undo item copy global variable into schematic editor frame object
member variable.
* Add helper methods for accessing the undo item copy member variable.
* Fix undetected bug when changing a text type.
* Added an exchange command to the undo/redo base class for handling undoing
a changed item type which cannot be undone by swapping out the variables.
* Revert change to common/hotkeys_basic.cpp that broke hot key behavior.
* Lots of coding policy changes while making the changes above.
* Add item clarification context menu to EESchema when multiple unresolved
items are found at the current cross hair position.
* Add collector class SCH_COLLECTOR for supporting multiple item hit testing.
* Removed bit wise masked filtering from schematic item hit testing.
* Removed all old hit testing functions and methods scattered about the
EESchema source code.
* Move terminal point test function into SCH_SCREEN object.
* Fixed bug in terminal point test when terminating a bus to a label.
* Define the < operator for sorting schematic items.
* Add area calculation method to EDA_Rect item.
* Add method for returning an item's bitmap for menu display purposes.
* Add method for returning an item's menu text for menu display purposes.
* Changed EDA_ITEMS container from boost::ptr_vector to std::vector.
* Factor coordinate string conversion code from EDA_DRAW_FRAME to function
CoordinateToString().
* Move locate function code into schematic screen object.
* Move test for junction needed into schematic screen object.
* Move test for marking connected items into schematic screen object.
* Move delete item function code into schematic screen object.
* Move delete all markers code into schematic screen object.
* Add method for locating multiple items in schematic screen object.
* Fix minor bug in schematic field object hit test declaration.
* Initial encapsulation work on item picker object.
* Remove duplicate doxygen comments from item picker object source file.
* Change EDA_ITEM set flag function to set flag bits using logical or
instead of assignment.
* Add clear flag function to EDA_ITEM to clear flag bit using inverted
logical and.
* Factor change schematic text type code out of switch statement into
a single function call.
* Schematic text orientation function renaming improvements.
* Lots of small coding policy changes to updated files.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Changed managed cursor callback definition to include the current
cursor drawing position.
* Modified all managed cursor callbacks to match new definition.
* Added snap to grid option to base drawing frame object.
* Changed add no connect managed cursor callback to use new position
parameter instead of the stored one.
* Lots of coding policy fixes.
This was due to a duplicate constants ( with sligtly different values) used to select items in some seach functions that broke filtering. Old definitions removed.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
* Rename sch_item files to sch_junction.
* Make global variable g_ItemToRepeat a private member of SCH_EDIT_FRAME
object.
* Encapsulate SCH_SCREEN reference count member.
* Move update block pick list code to SCH_SCREEN object.
* Remove redundant drawing function RedrawOneStruct().
* Change context menu text "Noconn" to "No Connect".
* Change context menu text "GLabel" to "Global Label".
* Replaced find dialog with wxFormBuilder version.
* New find dialog is modeless, supports more advanced search features,
remembers it's last position, size, search history, and search settings,
and implements initial support for replacing.
* Added Shift+F5 hot key to search for next DRC marker. F5 now just
repeats previous search.
* Minor cosmetic enhancements to label edit dialog.
* Remove tab from grid size text printf to fix toolbar grid combobox
display in wxGTK.
* Updated my TODO list items.
jean-pierre charras
unknown
Lorenzo Marcantonio
Dick Hollenbeck
Wayne Stambaugh
stambaughw