Previously, if a SMD pad was round, itb was seen as BGA pad.
But this is not always true. so use always SMD PAD attribute,
until an explicit BGA pad attribute is added in Pcbnew
The pin name defined in Eeschema is now available as pad info.
Useful for the board designer (the pin function is displayed in the message panel).
Needed for the Gerber P&P files.
Previously, zones of the same net were merged for plotting,
regardless the fact the outline thickness can be different between the zones,
creating incorrect solid areas.
Fixes: lp:1840695
https://bugs.launchpad.net/kicad/+bug/1840695
1) Intermediate states might be self-intersecting, and we shouldn't
be policing our users on what order to do things in
2) The polygon might already be self-intersecting, at which point we're
preventing the user from fixing it.
Also includes better const management for SHAPE_POLY_SET API.
Fixes: lp:1833831
* https://bugs.launchpad.net/kicad/+bug/1833831
This places the arc approximation setting in the kicad_pcb file and uses
it for all parts of the board rendering where arcs are converted to
segments. This allows the user to customize their speed vs. accuracy
tradeoff. The default setting of maximum error of 0.005mm is acceptable
for small boards on moderate systems.
This corrects an issue with fill segments-per-circle and moves the error
to segmetns calculation down in a number of functions to expose the
single value for approximation
This removes the remaining hard-coded segments counts and replaces them
with the relative error calculation where the segments per arc is
determined by the maximum error we allow (smaller arcs = fewer segments)
Give the user the option of cancelling a file open if there are
segment zones; otherwise they're converted to polygon fills.
Fixes: lp:1823087
* https://bugs.launchpad.net/kicad/+bug/1823087
the filled areas can use a hatch pattern (crossing lines) using square holes.
The zone filler removes too small holes (truncated holes) from hatch pattern.
It avoid to create small holes when a hole pattern is truncated by the filled area base shape.
Allows 0 to 4 chamfered corners, not only one.
A custom shape allow this kind of shape. However because it is a primitive,
it is easier to edit and it support thermal reliefs.
While not technically allowed, overlapping polygons can be drawn in
pcbnew. Gerber polygons are strictly simple, however, so we need to
fracture prior to exporting to avoid invalid gerbers.
IsPolygonFilled() replaces the hard coded comparisob with Edge_Cut in code.
For now the polygon is not filled only on Edge_Cut layer.
But in the future, it could be an option for other layers.
Commit 1858b7dca corrected the handling of polygons on the edge cut
layer for board items. This adjusts for the possibility of polygons
in modules on the edge cut layer by applying the module offset/rotation
to the polygon elements.
Like circles, polygons are self-closed elements that define an outline.
This allows them to be used as such for board outlines and cutouts.
Fixes: lp:1795563
* https://bugs.launchpad.net/kicad/+bug/1795563
Colors are assigned to virtual layers while the ToLayer_ID returns a
physical layer enum. The GetLayerColor/SetLayerColor take LAYER_NUM
(int) values that can be larger than the physical layer count.
We were trying to handle aOnlyOneFile at two different levels
which was preventing the Silk layer from going through the
right routine (and preventing board outlines from getting
drawn if selected).
We were also overwriting the references color local variable
before using it, meaning the reference was always rendered in
the value's color.
Fixes: lp:1774171
* https://bugs.launchpad.net/kicad/+bug/1774171
Rename GetPolyPoint() to BuildPolyPointsList(), because GetPolyPoint() looks like an accessor, but it is not an accessor.
(Using it as accessor can creates a *very long calculation time* for very basic access to polygon vertices)
Fixes: lp:1745050
https://bugs.launchpad.net/kicad/+bug/1745050
- support for background color setting
- removed several global config settings (such as g_Drc_On)
- wrapped most of global config settings in PCB_GENERAL_SETTINGS class
- reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
- new GAL feature for legacy users: double-click (or E) to change track width available as an option.
Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543
Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
Removes the need of using the legacy code in polygon/PolyLine.{h,cpp},
refactoring all CPolyLine instances with SHAPE_POLY_SET instances.
The remaining legacy methods have been ported to SHAPE_POLY_SET;
mainly: Chamfer, Fillet, {,Un}Hatch.
The iteration over the polygon vertices have been simplified using the
family of ITERATOR classes.
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas. When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
Make all EDA_TEXT data private and rename accessors to avoid function
name collisions in derived classes.
Overload EDA_TEXT's SetTextAngle() and SetEffects() in TEXTE_PCB.
Add support for preserving Reference text position, size, orientation
during a netlist import into a BOARD, as well as the one off footprint
update dialog.
This option is not yet activated because the net attributes are not yet fully fixed by Ucamco, in Gerber file format specifications.
(To activate it, see dialog_plot.cpp, line 43)
PAD_SHAPE_T and PAD_ATTR_T still have a double definition (new names and old names) to be sure python scripts are nor broken by the change.
PAD_DRILL_SHAPE_T does not have a double definition, because it is unlikely oblong holes are used in python scripts.
Double definitions will be removed in the (next) future.
* if the current select plugin is the github plugin, one can select some of these libraries and add them to the table
* if the current select plugin is the kicad plugin, one can select some of these libraries and download them to make alocal copy.
They can added to the table after they are downloaded.
- Reference is visible on silk and the corresponding assembly layer
- Reference is shown on assembly always on the component insertion point
Hidden references are not forced shown in assembly plots (there is
already a user option for that)
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
The old Cu stack required knowing the count of Cu layers to make
sense of the layer number when converting to many exported file types.
The new Cu stack is more commonly used, although ours still gives
B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
You will need to convert to the format immediately, *.kicad_pcb and
*.kicad_mod (=pretty) since legacy format was never going to know
about 32 Cu layers and additional technical layers and the reversed Cu
stack.
- Converted the Next/Prev C casts to static casts and removed the type
unsafe ones
- Splitted as virtual the VIA::Flip member instead of using RTTI
- Heavily refactored the 'unconnected track' cleanup routine
- Misc constification
- SEGVIA becomes VIA
- Drill size moved from TRACK to VIA
- Removed shape from TRACK, becomes ViaType in VIA
- GetTrace becomes GetTrack, for uniformity
- Some minor constification and typo fixes
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
Added DIMENSION::SetOrigin(), DIMENSION::SetEnd(), DIMENSION::GetOrigin(), DIMENSION::GetEnd(), DIMENSION::GetHeight().
Fixed flipping for DIMENSION class.
Added an information that helps to understand roles of the points in the DIMENSION class.
Some minor changes to PCB_PAINTER (mainly using const COLOR4D& for taking the result of GetColor() function).
The plan goes like this:
- eeschema still uses int in decidegrees
- all the other things internally use double in decidegrees (or radians
in temporaries)
- in pcbnew UI the unit is *still* int in decidegrees
The idea is to have better precision everywhere while keeping the user with int i
angles. Hopefully, if a fractional angle doesn't come in from the outside, everything
should *look* like an integer angle (unless I forgot something and it broke)
When the time comes, simply updating the UI for allowing doubles from the user should
be enough to get arbitrary angles in pcbnew.
- Removed spurious int casts (these are truncated anyway and will break
doubles)
- Applied the Distance, GetLineLength, EuclideanNorm, DEG2RAD, RAD2DEG
ArcTangente and NORMALIZE* functions where possible
- ArcTangente now returns double and handles the 0,0 case like atan2, so
it's no longer necessary to check for it before calling
- Small functions in trigo moved as inline
* Complete encapsulation of the ZONE_CONTAINER class.
* Fixed a bug in the EDA_TEXT::Format() default effects behavior due to
improper conversion to internal units and missing test for default
thickness.
* Improved grammar of some Pcbnew context menu strings.
* Moved some more cleverly hidden BOARD object methods into class_board.cpp.
* Lots of coding policy and documentation fixes.
* Complete encapsulation of the MODULE class.
* Complete encapsulation of the EDA_TEXT class.
* Encapsulate most of the ZONE_CONTAINER class.
* Add pcbcommon library as a dependency for reSWIGging the scripting
support. This should cover most dependency cases.
* Encapsulate most of the MODULE class.
* Start encapsulating the DIMENSION class.
* Lay some groundwork for EDA_TEXT encapsulation.
* Move cleverly hidden MODULE functions into class_module.cpp.
* Use std::swap to exchange TEXTE_PCB values for undo/redo.
* Remove unused members from MODULE class.
* The usual coding policy and documentation fixes.
jean-pierre charras
Seth Hillbrand
Jeff Young
Jon Evans
Tomasz Włostowski
Maciej Suminski
Alejandro García Montoro
Dick Hollenbeck
Patrick Pereira
unknown
Lorenzo Marcantonio
Wayne Stambaugh
Heikki Pulkkinen