* Add footprint methods to PCB_IO.
* Add FP_CACHE and FP_CACHE_ITEM for handling new footprint library design.
* Add code to save legacy libraries in new format.
* Change behavior of BOARD_ITEM::GetLayerName() to return the default layer
name when the item does not have a BOARD as a parent.
* Minor changes to the module output formatter when writing to module library
files (no BOARD as parent).
* Add new (and some that I forgot along the way) CMake flags to
EDA_BASE_FRAME::CopyVersionInfoToClipboard().
* Add -Wno-narrowing to GCC flags to stop GCC 4.7 from complaining about
a conversion from int to unsigned in the Boost polygon library.
* Add INPUT_STREAM_READER to richio.cpp to allow using any object derived
from wxInputStream as a LINE_READER (needs to be validated).
clean duplicate code.
Simplify HPGL dialog: plot offet removed and replace by only one option (plot origin to center of sheet or not)
This is surely enought.
Mainly to plot drill maps, but can be used to plot boards, for documentation.
The print svg still exists, but the plot SVG has more options (mirroring, holes in pads),
however print svg allows color print, and full board printing, and plot does not.
and therefore tracks are now dragged when a end point is inside a pad, not necessary on the pad position.
However, drag functions still need more cleanup.
Kicad manager: shows now svg files in tree files.
Pcbnew: fix incorrect printing (board out of page) when creating drill map in postscript format ( noticeable mainly for small boards)
* serious code cleanup (remove duplicate code)
* shows (option in 3D preference menu) the copper items (tracks, zones...) in 3D, using 35 microns copper thickness.
However, because there are a lot more3D data to show (roughly 4 times more), this is slower.
connection, no matter if it is originating locally or from the outside
of the host. There is no check in place to discard non-local
connections. The only security against a malicious attack would be
provided by a local firewall, which is not guaranteed to be installed on
every workstation kicad is used on.
I tested this, and a host running eeschema accepts connections on TCP
port 4243 from other hosts on the internet.
A patch to remedy this potentially serious security hole is attached. It
creates the listener on localhost instead. A flag is provided to allow
the creation of sockets on 0.0.0.0 instead, if required. localhost is
the default.
All: press ctrl+shift key when moving the mouse allows the graphic cursor to be moved outside the grid.
(useful to place graphic objects, texts in any position, regardless the current grid)
This is *a work in progress*, so some features are missing, and/or could be modified.
Mainly keepout zones are not yet exported to autorouters, and pads are not taken in account.
Some code cleanup in polygon.*
* Add s-expression file parser object and keyword files.
* Fix minor issues with s-expression file formatting.
* Fix a minor bug the zone container fill state parsing in the legacy plugin.
* Move EDA_TEXT visibility definition to eda_text.h.
* Add minor BOARD_ITEM object improvements to support s-expression file
parser.
This may have been an undocumented bug from more than a year ago, which manifested itself in *.mod files containing duplicate names.
LEGACY_PLUGIN loads those now quietly, but appends "_v2", "_v3", etc. to each succeeding duplicate sharing the same name.
base on expected text and current window font.
Expand the virtual world to 2.14 meters in the nanometer build of PCBNEW.
This seems to be holding up for now.
Delete LEGACY_PLUGIN cache after deleting library of same name.
Remove automatically generted freerouter help header.
Add Normalize() to BOX2.
Clamp some values in the virtual space of drawframe.cpp
Should allow Pcbnew code easier to change and Gerbview code more understandable and easier to maintain.
Code cleaning (remove dead code, add comments).
Minor other enhancements.
Other scaling factors (MILS_TO_IU_SCALING_FACTOR and DECIMILS_TO_IU_SCALING_FACTOR)
also defined only in convert_to_biu.h.
Allows different scaling value for Gerbview.
Needs more tests.
solution to see that it was not pre-computing constants when used in static initializers.
So we have two use cases, and need two solutions to be optimal, since the compiler
is too stupid to do the right thing.
I think we need something else for compile time computable constants, to be optimal
in both use cases. There is quite a bit of code savings by using a macro for that
situation from my testing. To fully capitalize on this, we need to go back and make
Mm2mils() and what not macros also, or have MACRO versions of them too.
as a starting point
* Make double Distance() take double arguments and remove internal range checking.
* Start on EDA_DRAW_FRAME::AdjustScrollBars() and use "double" for most all calculations
in anticipation of setting INT_MAX INT_MIN limits eventually.
* Move board item object Format() functions into PCB_IO object.
* Change file format to use layer names instead of numbers.
* Change file extension to kicad_pcb.
// This provides better project control over rounding to int from double
// than wxRound() did. This scheme provides better logging in Debug builds
// and it provides for compile time calculation of constants.
#include <stdio.h>
#include <assert.h>
#include <limits.h>
//-----<KiROUND KIT>------------------------------------------------------------
/**
* KiROUND
* rounds a floating point number to an int using
* "round halfway cases away from zero".
* In Debug build an assert fires if will not fit into an int.
*/
#if defined( DEBUG )
// DEBUG: a macro to capture line and file, then calls this inline
static inline int KiRound( double v, int line, const char* filename )
{
v = v < 0 ? v - 0.5 : v + 0.5;
if( v > INT_MAX + 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' > 0 ' for int\n", __FUNCTION__, filename, line, v );
}
else if( v < INT_MIN - 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' < 0 ' for int\n", __FUNCTION__, filename, line, v );
}
return int( v );
}
#define KiROUND( v ) KiRound( v, __LINE__, __FILE__ )
#else
// RELEASE: a macro so compile can pre-compute constants.
#define KiROUND( v ) int( (v) < 0 ? (v) - 0.5 : (v) + 0.5 )
#endif
//-----</KiROUND KIT>-----------------------------------------------------------
// Only a macro is compile time calculated, an inline function causes a static constructor
// in a situation like this.
// Therefore the Release build is best done with a MACRO not an inline function.
int Computed = KiROUND( 14.3 * 8 );
int main( int argc, char** argv )
{
for( double d = double(INT_MAX)-1; d < double(INT_MAX)+8; d += 2.0 )
{
int i = KiROUND( d );
printf( "t: %d %.16g\n", i, d );
}
return 0;
}
*) for footprint access into *.mod files and
*) BOARD save/load
The item_io.cpp and ioascii.cpp have been set off to the side for reference
as *.notused, for awhile.
The CMake options USE_NEW_PCBNEW_LOAD and USE_NEW_PCBNEW_SAVE are gone,
this is now the mandatory usage of the LEGACY_PLUGIN. This should reduce
code maintenance for awhile until the s-expression plugin comes into
play. But at least for legacy format, there is not two code bodies
to maintain any more.
A new LEGACY_PLUGIN footprint library caching scheme is in place which
needs some testing. It should not be any faster, but might give better
results in a networked environment if there is *.mod files on the server.
* Remove internal units from BASE_SCREEN and it's derivatives.
* Remove internal units from EDA_DRAW_FRAME and it's derivatives.
* Use build time code to replace internal units conversions.
* Fix scaling bug in page layout sample window that I created in my
last commit.
* Move all convert from user to internal units into base_units.cpp.
* Remove internal units parameters from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Remove internal units from all dialog text control helper classes.
* Move all convert from internal to user units functions into separate file.
* Remove internal units parameter from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Compile these conversion routines separately for the appropriate pcb or
schematic internal units.
* Move internal units specific status bar update code into the appropriate
application for updating the status bar.
* Move millimeter user units rounding function to common.cpp.
* Move EDA_TEXT object into separate header and source file.
* Compile EDA_TEXT class separately for BOARD_ITEM and SCH_ITEM units.
* Compile PAGE_INFO class separately for BOARD_ITEM and SCH_ITEM units.
* Minor formatting tweaks to Pcbnew s-expression file.
* Move internal unit formatting functions into BOARD_ITEM and SCH_ITEM.
Wayne Stambaugh
jean-pierre charras
Craig Southeren
Lorenzo Marcantonio
Dick Hollenbeck
Gregor Riepl
Miguel Angel Ajo
Marco Mattila
brian.
lajos kamocsay