* Uncouple SCH_COMPONENT::GetRef() from SCH_SHEET_PATH and use SCH_SHEET
instead.
* Uncouple SCH_COMPONENT::GetUnitSelection() from SCH_SHEET_PATH and use
SCH_SHEET instead.
* Fix all calls to GetRef() and GetUnitSelection() to pass a pointer to the
appropriate SCH_SHEET object instead of an SCH_SHEET_PATH object.
* Add code to SCH_SHEET object to clear annotation.
* Change SCH_COMPONENT::GetPath() to derive path from SCH_SHEET object instead
of SCH_SHEET_PATH object.
* Remove clear annotation code from SCH_SCREENS object.
* When multiple pins are in the same position and one is not connected,
show connection indicator correctly.
* LIB_PIN::IsVisible should be a const method so it can be called on
DANGLING_END_ITEM children without having to discard const.
* Test the (!IsVisible() && GetType() == PIN_POWER_IN) condition in a method
LIB_PIN::IsPowerConnection to avoid duplicating that condition if the test
needs to be performed in more than one place. (e.g. dunderheads like myself
might forget about the necessary GetType() == PIN_POWER_IN and just check
visibility.)
* Coding style fix: break a couple lines that were above the 99-column maximum.
* Add and/or improve Doxygen comments on SCH_COMPONENT::IsPinDanglingStateChanged
and SCH_COMPONENT::IsDanglingStateChanged.
Move items rework: enhancements: for some items (sheets, components, bus entries) the mouse cursor is no more wrapped to the anchor. For large symbols, this is better: they are more easy to place.
There is also a change when starting a move item command: the full screen is redraw, and therefore there is no artifact due to the XOR draw mode.
Some other minor coverity fixes (uninitialized members).
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
get disassociated from their true PROJECT.
*) Allow loading eeschema library editor from kicad.exe
*) Allow loading pcbnew library editor from kicad.exe
*) Rename LIB_COMPONENT to LIB_PART.
*) Add class PART_LIBS, and PART_LIB.
*) Make PART_LIBS non-global, i.e. PROJECT specific.
*) Implement "data on demand" for PART_LIBS
*) Implement "data on demand" for schematic SEARCH_STACK.
*) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
*) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
a weak pointer.
*) Remove all chdir() calls so projects don't need to be CWD.
*) Romove APPEND support from OpenProjectFiles().
*) Make OpenProjectFiles() robust, even for creating new projects.
*) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
and save them in the .eeschema config file, not in the project file.
*) Fix bug with wxDir() while accessing protected dirs in kicad.exe
*) Consolidate template copying into PROJECT class, not in kicad.exe source.
*) Generally untangle eeschema, making its libraries not global but rather
held in the PROJECT.
Pcbnew: Code cleaning and bug fix in autoplace functions
Dialog exchange footprints has now a separate button to update the .cmp file, only on request.
Fix an annoying issue about not named nets:
now, these nets are named from the component references and pin names which are connected.
therefore, unless the net or the footprint references are modified, the net name is not modified between 2 netlist calculations.
sometimes, the modified flag was set for these components just when switching from a sheet to an other sheet.
Pcbnew: fix Bug #1197414 (dragged track segments does not show clearance area)
* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
* All objects derived from EDA_ITEM now have consistent hit test method
definitions.
* Remove double function calls from all classes derived from SCH_ITEM.
* Lots of Doxygen comment fixes.
* Convert Eeschema from manually linked list to DLIST for storing
SCH_ITEM objects.
* Add helper functions to SCH_SCREEN for appending list of SCH_ITEM
objects.
* Fix bug in wire editing code for accurate undo/redo behavior.
* Add member to DLIST to append another DLIST.
* Other minor code cleaning.
* Remove unnecessary copy constructors from schematic and component
library objects.
* Add comment to class definitions where the default copy constructor
generated by the compiler was adequate.
* Add assignment operator to EDA_ITEM, SCH_ITEM, and all schematic
objects where the default assignment operator generated by the
compiler would not be adequate.
* Enable replace toolbar button and menu entry.
* Improve find replace logging granularity.
* Fix find and replace dialog control hiding and disabling.
* Minor improvements to the SCH_FIND_REPLACE_DATA object.
* Move find collector list iterator into the collector object.
* Add visibility override flag to EDA_ITEM to temporarily show items that
are hidden during find and replace.
* Replace Eeschema find code with a collector based implementation.
* Fixed a search bug when all subsequent searches of an item would ignore
the remaining valid child items when an item had more than one child
item that matched the search criteria.
* Add SCH_FIND_COLLECTOR class to find all items that meet the specified
search criteria.
* Add SCH_FIND_COLLECT0R_DATA to keep track of information for all matching
items.
* Use collector to iterate over the list of items that match the search
criteria rather than trying to start at the last matched item.
* Remove unused searching methods from sheet path and sheet path list
objects.
* Add replace and replace all functionality to Eeschema find dialog.
* Push matching methods down to EDA_ITEM class so they can be used by
other derived objects.
* Add method to EDA_ITEM to test if item supports replacing.
* Add flag to find/replace data to support replace feature.
* Disable wild card matching check box when dialog is in replace mode as
wild card replacement is not supported at this time.
* The usual Doxygen comment and coding policy fixes.
* Fix a set position method bug in schematic item that caused the fields
to drawn in the wrong position.
* Group zoom hot keys to use the same command event in schematic and
library editor frames.
* Add get and set position methods to all schematic items.
* Encapsulate schematic item position members.
* Add swap data method to schematic items that lacked one.
* Remove global swap data function used by undo and redo functions.
* Unify as many schematic move methods as possible.
* Remove unnecessary place schematic item methods.
* All schematic items are now moved in the same event handler.
* Fixed bug in hierarchical sheet get menu item string method.
* Make no connect and junction items movable, fixes lp:804048
* Add net list object creation functions to schematic component object.
* Remove external variables used by the verify bus label and parse bus
label functions.
* Remove redundant net list object include sheet path member assignment.
* Add license statements to all modified files that required one.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
* Change the minimum required CMake version to 2.6.4 for all build platforms
except Windows and OSX.
* Move all schematic plot code from plot.cpp into the appropriate schematic
objects.
* Create SCH_SCREEN plot method to plot all objects in the schematic
screen.
* Delete plot.cpp and remove it from the CMakeList file.
* Create library collector class.
* Add clarification menu to library editor when multiple items are found
at the current position.
* Add get clarification menu text to all objects derived from LIB_ITEM.
* Add get menu bitmap for all objects derived from LIB_ITEM.
* Improve LIB_PIN bounding box calculation.
* Rename LIB_ITEM::DoGenCopy to doClone to match behavior defined in base
class EDA_ITEM.
* Minor class renaming for improved code consistency.
* Added less than operator to EDA_ITEM.
* Component moves can now be undone do to incorrect virtual method declaration
in schematic component object.
* Undoing a field move now redraws the undone field properly.
* Fix bug when after aborting a field move kept displaying context menu
field items.
* Removed unused current field member variable and access methods from the
schematic edit frame object.
* Update component move code to comply with coding policy.
* Add item clarification context menu to EESchema when multiple unresolved
items are found at the current cross hair position.
* Add collector class SCH_COLLECTOR for supporting multiple item hit testing.
* Removed bit wise masked filtering from schematic item hit testing.
* Removed all old hit testing functions and methods scattered about the
EESchema source code.
* Move terminal point test function into SCH_SCREEN object.
* Fixed bug in terminal point test when terminating a bus to a label.
* Define the < operator for sorting schematic items.
* Add area calculation method to EDA_Rect item.
* Add method for returning an item's bitmap for menu display purposes.
* Add method for returning an item's menu text for menu display purposes.
* Changed EDA_ITEMS container from boost::ptr_vector to std::vector.
* Factor coordinate string conversion code from EDA_DRAW_FRAME to function
CoordinateToString().
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
* Move schematic select block from global variable to SCH_EDIT_FRAME.
* Remove redundant schematic drawing code for eeredraw.cpp.
* Move block select code into SCH_SCREEN object.
* Simpilify block item select code.
* Fix bug in SCH_LINE selection state test.
* Add test to schematic objects for connectability.
* Make copy block items function a private method in SCH_EDIT_FRAME.
Wayne Stambaugh
Chris Pavlina
jean-pierre charras
Dick Hollenbeck
Povilas Kanapickas
Lorenzo Marcantonio
Marco Mattila