Schematic cleanup only makes sense after the libraries are fully updated
and loaded. Before pin caching, this was a minor difference but once we
needed to update pin caches, schematic cleanup can remove junctions from
pin-wire connections incorrectly.
Instead, we use the global OpenProjectFiles() schematic cleanup call to
be sufficient and not call a second time, prior to all libraries being
rescued and loaded.
Fixes: lp:1743148
* https://bugs.launchpad.net/kicad/+bug/1743148
File names with spaces were causing invalid symbol names in both the
rescue library and the cache which would cause both libraries to fail
to load because library symbol names are not escaped so the spaces
tripped up the library parser. Replace the spaces in the file names
with hyphens and in both the rescuer and the remapping code so the
library nickname in the symbol library table does not contain spaces.
Update the symbol library table dialog to prevent users from defining
library nicknames with spaces. This is different than the footprint
library table which allows nicknames with spaces. This solution is
a temporary fix until the new symbol library and schematic file formats
are implemented.
Fix off by one row in illegal nickname error message in the symbol
library table editor.
This commit is a partial revert of aa81f5b9 & 445ac505. LIB_ID should
not be modified when a library is assigned to its part, as the library
nickname cannot be evaluated during the assignment and might be
different than its filename.
Fix a bug where the full LIB_ID was not being used to look up the name
of the symbol in the cache library preventing the rescue to work when
rescuing symbol library table projects.
Add information as to why a symbol was rescued rather than only showing
what symbols were rescued.
Do not add rescue suffix to symbol name for symbol library table rescues
because if a symbol name exists in multiple libraries that need rescued
at the same time will cause subsequent symbol rescues to be overwritten.
Append the nickname of the schematic symbol library to prevent symbol
name clashes in the rescue library.
Use the symbol found in the library when the symbol is not in the cache
library.
Add an assert to prevent dereferncing a null pointer in the future even
thought this should not happen as the rescue algorithm does not add a
candidate when a symbol cannot be found in either the cache or any other
library.
Fixes lp:1741964
https://bugs.launchpad.net/kicad/+bug/1741964
Change the legacy schematic plugin to preserve illegal LIB_ID characters
when load schematics prior to version 4.
Check for illegal LIB_ID symbol names during project rescue. Rename and
rescue any symbols with illegal LIB_ID names.
Add static methods to LIB_ID object for testing for and fixing names
with illegal characters so there is uniform code for doing so.
Update the Eagle plugin symbol loader to fix symbol names using the new
LIB_ID fix illegal names method.
Fixes lp:1732236
https://bugs.launchpad.net/kicad/+bug/1732236
In the rare case when something goes wrong with the symbol library
table remapping, do not attempt to rescue symbols that are neither
in the cache nor in any of the libraries.
The legacy rescue library code overwrote the existing library so
previous rescues would get lost. If the rescue library exists,
copy it's contents into the new rescue library before adding the
new rescued symbols so no previously rescued symbols are lost.
Fix a null pointer bug in the symbol library editor when no symbol
is loaded.
Set LIB_ID item name to name passed to LIB_PART ctor.
Copy LIB_ID in LIB_PART copy ctor.
If a library disappears all together or a symbol name is changed, force
the rescuer to add it to the rescue library. The current rescue code
only looked for differences if they existed between libraries. This was
causing symbols to be unceremoniously dumped from the symbol library
table remapping.
Don't search for cache rescue candidates in the symbol library table
rescuer.
Refactor rescue objects so that they can support derivation.
Factor out legacy rescuer code to perform legacy project rescues.
Create new symbol library table rescuer for rescuing symbol library table
based projects.
Perform the correct rescue type on project load.
Add symbol library table remapping support to the tools menu for run on
demand as applicable.
Add flag to SCH_SCREENS::UpdateSymbolLinks() to allow forcing the symbol
link updates when the library modification hash has not changed.
This forces the compiler class specific features rather than borrowing
from the base class's std::string. In some cases prior to this,
wxString( std::string ) was being called rather than UTF8::operator
wxString() leading to garbled wxStrings.
Added function UTF8::wx_str() which is of great convenience also.
Implicit conversions still work as before, and hopefully more reliably.
This commit was too broad and not cognizant of the purpose of the class
UTF8.
Add MAYBE_VERIFY_UTF8() macro, which can trap non-UTF8 encoded strings in
debug builds.
Use that macro conditionally in class UTF8 to trap non-UTF8 encoded strings
being put into UTF8 instances.
For some reason, the schematic symbol library link was being regenerated
every time the schematic was redrawn in SCH_SCREEN::Draw(). Remove the
re-link call from the Draw() and Plot() functions.
Add function the SCH_SCREENS to update the links in all of the schematic
sheets.
Update all schematic sheet symbol library links whenever the symbol
library list is modified or any library in the library list is modified.
That should cover all cases where the symbol library links could be
broken.
Refresh schematic window after applying library changes to update any
possible symbol changes.
Add KIWAY message to update the schematic when symbol library changes
could change the schematic. The KIWAY mail was used because the schematic
frame is not a parent of the symbol library editor so wxEvents cannot be
used.
LIB_ID was changing the symbol name due to the parser dropping everything
past the first '/' character which is interpreted by LIB_ID as the item
version. Add flag to ignore this in LIB_ID::SetLibItemName() and add a
new ctor so the library nickname, item name, and revision can be set as
required to prevent the standard LIB_ID parsing.
Fix a few places where PART_LIBS functions FindLibraryAlias() and
FindLibPar() were translating wxString symbol names to LIB_IDs where the
LIB_ID parser was truncating the symbol name.
Use LIB_ID instead of wxString for storing the library symbol information
in the schematic symbol in preparation for the upcoming symbol library table
implementation.
Change the FindLibAlias and FindLibPart functions in the PART_LIBS object
instead of wxString. Please note that only the library ID name is used to
search the list of libraries. The library nickname is ignored. Once the
symbol library table is implemented and full LIB_IDs are defined, the
library search code will no longer be used and will only be kept to load
older schematics that have not been converted.
Move SCH_LEGACY_PLUGIN_CACHE definition so that the legacy plugin knows
how to properly delete the cache object.
Add SCH_PLUGIN object to PART_LIB object.
Convert all PART_LIB I/O to use SCH_PLUGIN.
Remove library caching from PART_LIB and use caching provided by SCH_PLUGIN.
Add support to use PROPERTIES for buffering and document file write control
instead of adding code the SCH_PLUGIN object in the SCH_LEGACY_PLUGIN that
will not be required when the new file formats are implemented.
Add buffering to SCH_LEGACY_PLUGIN to prevent cache from writing file on
every change to library. This is to prevent the cache library from being
written every time a new symbol is added.
Add option to not save library document file when saving library. This is
primarily used by the cache library write code.
Move symbol library write code out of LIB_PART and into SCH_LEGACY_PLUGIN.
Add exception handling where LIB_PART caught the exception and returned
an error status.
Remove KICAD_SCH_IO_MANAGER build option as it is no longer optional.
Rename PART_LIB GetEntryNames() and RemoveEntry() to GetAliasNames() and
RemoveAlias() respectively for improved readability.
Rename PART_LIBS FindLibraryEntry() to FindLibraryAlias() improved
readability.
Remove commented out PART_LIBS::FindLibraryEntries().
Remove PART_LIB::GetFirstEntry() and update all effect code accordingly.
Remove unused PART_LIB::SetFileName() method.
Remove unused PART_LIBS::RemoveAllLibraries() method.
* Remove wxDC and EDA_DRAW_FRAME parameters from SCH_SCREEN::SchematicCleanUp()
function call.
* Update all code that calls SCH_SCREEN::SchematicCleanUp() with wxDC and/or EDA_DRAW_FRAME
parameters.
* Fix a display refresh bug when incrementally inserting bus entries created in my last commit.
IsDanglingStateChanged() appears to be broke for bus entries.
- Slightly change the info text in the dialog. Add a definition of exactly what it means to "rescue" a component.
- Reload the project libraries when a project is opened, even if kicad is already running and the same project is open (to be sure the lib cache is up to date).
- Set the Modified flag on cancel, because a change has indeed been made (choosing not to rescue is equivalent to updating the components)
* Components with multiple "converts" were rendered with all of them overlapping instead
of just one.
* Schematics missing a -cache.lib resulted in unnecessary renaming suggestions.
* The dialog title "Conflicts Checking" is inaccurate now (as we're checking for more than
just conflicts) and also somewhat awkward, unidiomatic GUI English; I renamed it to
"Project Rescue Helper".
jean-pierre charras
Seth Hillbrand
Wayne Stambaugh
Maciej Suminski
Camille
Simon Richter
Dick Hollenbeck
Kristoffer Ödmark
Chris Pavlina
Wayne Stambaugh