When parsing component names, we need to account for the possibility of
illegal characters (e.g. "/", ":") in the names from v4 libraries. They
are fixed internally by the cache parser but if we don't fix them
in the rescue routine, the symbol won't match it's cache name.
This standardizes all schematic illegal character routines into LIB_ID
Fixes: lp:1774774
* https://bugs.launchpad.net/kicad/+bug/1774774
When LIB_ALIAS is renamed, it validates the new name. In case the name
typed in the field edit dialog is invalid, there was a discrepancy
between the name used further in the code and the actual alias name.
Fixes: lp:1765375
* https://bugs.launchpad.net/kicad/+bug/1765375
Three interrelated issues:
1) Implement an undo/redo type for renames so that we know to delete
the old lib entry and add a new lib entry
2) When doing so (for the undo/redo OR the original edit), we must
make a copy of the 'original' LIB_PART which is used for revert, and
hand it to the new lib entry
3) When comparing a modified component tree item with the current item
we must also check for aliases.
Fixes: lp:1743857
* https://bugs.launchpad.net/kicad/+bug/1743857
Fixes: lp:1744371
* https://bugs.launchpad.net/kicad/+bug/1744371
Fixes: lp:1744373
* https://bugs.launchpad.net/kicad/+bug/1744373
Crash was caused by removal of the selected item from the
wxDataViewModel, which was later accessed in
COMPONENT_TREE::GetSelectedLibId(). To avoid the problem, the selection
is validated before regenerating the tree widget.
Fixes: lp:1740952
* https://bugs.launchpad.net/kicad/+bug/1740952
Replace all instances of "component" and "part" with "symbol" when
referring to schematic and library symbols.
Replace all instances of "component" with "footprint" when referring to
board and library footprints.
Minor dialog layout fixes to some of the dialogs impacted by the UI
string changes.
Simplify some of the library editing code. There have been a few minor
changes in the behavior of the editor. If the current symbol is deleted
from the library, the next symbol in the library is not loaded. The
deleted symbol is cleared and the current symbol is empty.
Change component to symbol to align with the preferred terminology
discussed on the developer's mailing list.
Add separate update UI event for save library as to enable the menu entry
whenever a library is selected.
Change the select symbol list dialog to a single column using the LIB_ID
format LIB_NICKNAME:LIB_ITEM_NAME so that the selection can be parsed by
LIB_ID.
Add method to expand URI to LIB_TABLE_BASE.
Override wxApp::OnExceptionInMainLoop() in debug builds to make debugging
easier when an unhandled exception occurs in a wxUpdateUIEvent handler.
Change SCH_SCREENS::HasNoFullyDefinedLibIds() to return false when the
schematic has no symbols to prevent the remapping dialog from being run.
Use SCH_COMPONENT part reference when creating netlist rather than looking
up the library symbol.
Replace LIB_PART::Conflicts() with an external test to for alias name
conflicts. This was only use in one place so don't clutter the library
API.
Change LIB_PART::AddPart() return type from bool to void since it's not
checked by any callers and differs from the equivalent schematic I/O
plugin function.
* Rename redundant function PART_LIB::GetEntry() to PART_LIB::GetAlias() which
is more descriptive and move the GetAlias() function which was nothing more
than a call to GetEntry().
* Refactor edit one field dialogs to use validators and transfer data to and
from window functions.
* Add code to DIALOG_SHIM to handle validation and transfer functions since
the base dialog class code is not called by EndQuasiModal().
* Add custom validator class for filtering field text control characters.
* Add new field validator to edit schematic component dialog field text
control.
* Add new field validator to edit fields in library editor dialog field
text control.
* Make a few LIB_PART member functions const.
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
get disassociated from their true PROJECT.
*) Allow loading eeschema library editor from kicad.exe
*) Allow loading pcbnew library editor from kicad.exe
*) Rename LIB_COMPONENT to LIB_PART.
*) Add class PART_LIBS, and PART_LIB.
*) Make PART_LIBS non-global, i.e. PROJECT specific.
*) Implement "data on demand" for PART_LIBS
*) Implement "data on demand" for schematic SEARCH_STACK.
*) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
*) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
a weak pointer.
*) Remove all chdir() calls so projects don't need to be CWD.
*) Romove APPEND support from OpenProjectFiles().
*) Make OpenProjectFiles() robust, even for creating new projects.
*) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
and save them in the .eeschema config file, not in the project file.
*) Fix bug with wxDir() while accessing protected dirs in kicad.exe
*) Consolidate template copying into PROJECT class, not in kicad.exe source.
*) Generally untangle eeschema, making its libraries not global but rather
held in the PROJECT.
* Complete encapsulation of the MODULE class.
* Complete encapsulation of the EDA_TEXT class.
* Encapsulate most of the ZONE_CONTAINER class.
* Add pcbcommon library as a dependency for reSWIGging the scripting
support. This should cover most dependency cases.
* Create library collector class.
* Add clarification menu to library editor when multiple items are found
at the current position.
* Add get clarification menu text to all objects derived from LIB_ITEM.
* Add get menu bitmap for all objects derived from LIB_ITEM.
* Improve LIB_PIN bounding box calculation.
* Rename LIB_ITEM::DoGenCopy to doClone to match behavior defined in base
class EDA_ITEM.
* Minor class renaming for improved code consistency.
* Added less than operator to EDA_ITEM.
* Merge three separate rotate code paths into a single rotate item function.
* Reduce three separate rotate command IDs into a single rotate command ID.
* Move pin rotate code into pin object.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Fix bug that prevented component from being replaced in library when
the component root name was changed.
* Fix drawing bug when changing text or field item string while move in
progress.
* Fix drawing bug when rotating text item while move in progress.
* Prevent undo or redo when editing a component draw item.
* Fix assert bug when replacing component in library when the component
root name was changed.
* Fix bug in field editor caused by new root alias implementation that
prevented any field from being changed.
* Fix minor spacing issues with EESchema find dialog.
* Deprecate remaining internal linked list code from component library
objects.
* Rename pin object files to match new library object file naming
scheme.
* Move LIB_TEXT object definition into it's own header file.
* All library component object editing is now performed with the ojbect
except LIB_PIN (coming soon).
* Added TRANFORM class to handle coordinate transforms.
* Remove old transform matrix functions.
* More file renaming to align them with the other component library
object file names.
* Fix hot key bugs in library editor to disable edit keys while an item
is being edited.
* Fixed bug when cancelling rotation of text and field objects while
being moved.
* Use C++ map in component library instead of boost::ptr_vector.
* Drop Boost pointer containers for standard C++ containers.
* Moved duplicate name user interface elements from library object to
library editor.
* Added code to support direct addition and replacement of component
alias objects into libraries.
* Removed temporary strings used to add and remove alias objects.
* Libraries only store alias objects, components now accessed thru alias.
* Simplify library API for adding, removing, and replacing components.
* Updated edit component in library dialog and library editor to reflect
component library object changes.
* Fixed bug in library viewer when displaying alias name.
* Made a few header files compile stand alone per the new coding policy.
* Remove some dead code and the usual code formatting fixes.
Fixed compil warning under wxWidgets 2.9.1.
File beautification
Statring using wxTextEntryDialog instead of Get_Message (because Get_Message does not handle properly cancel option)
* Complete comment translation for all EESchema source files.
* Complete comment translation for all 3D viewer source files.
* Rename class class_hierarchical_PIN_sheet to SCH_SHEET_PIN.
* Rename class DrawSheetStruct to SCH_SHEET.
* Tool tip capitalization fixes.
* Uncrustify and spell check comments and strings in all modified source
files.
* Use single list for component library draw item and fields to simplify
component library object.
* Add field manipulation helper methods to component library object.
* Make component library draw item edit dialog sizable.
* Replace all known instances of (const wxChar*) casts to GetChars() for
wxWidgets 2.9 compatibility.
* Cleaned up get component dialog so last part gets saved on wild card
selections.
* Remove redundant schematic component drawing code.
* Added SCH_COMPONENT constructor to create new component from library
component object.
* Add message panel helpers to WinEDA_DrawFrame and update old message
panel access code.
* Using library viewer to add component to schematic now respects unit
and body style selection.
* Replace component library editor new component dialog using wxFormBuilder.
* Rename component library draw items to conform to current coding standards.
* Add GetWidth() method to component library draw objects.
* Add regular expression key word search capability to component library object.
* Component library viewer restores state between uses.
* Fixed automatic zoom calculations in library viewer.
* Make library entry list dialog restore previous selection.
* Fix bounding box calculation for vertical field and text draw objects.
* Changed library draw object comparison to test for greater and less than.
* Initial preparation for merging separate library component draw item lists.
Seth Hillbrand
Maciej Suminski
jean-pierre charras
Jeff Young
Wayne Stambaugh
Simon Richter
Tomasz Włostowski
Wayne Stambaugh
Mark Roszko
Dick Hollenbeck
charras