e9c0920be2
Use a standard SHAPE_POLY_SET hittest for pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8705
2021-06-30 22:36:29 +01:00
6810912f09
Refuse to load schematics from the future.
...
Also fixes a bug where an empty window would get left when loading
a file from the KiCad manager window errored out.
Also fixes a bug where we were getting the wrong exception because
we were rethrowing the type-casted one (rather than just calling
throw).
Fixes https://gitlab.com/kicad/code/kicad/issues/8604
2021-06-30 18:32:07 +01:00
5cac8afe1d
Remove long-dead revision support for LIB_IDs.
2021-06-30 13:12:57 +01:00
b1b4caee6a
Escape "naughty" characters in symbol names.
...
It's tempting to say that we don't need to exclude filename chars
from symbols, but we might regret that decision down the road. Better
to just escape them.
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
2021-06-30 13:12:57 +01:00
17737af130
Fix some issues related to SHAPE_ARC:
...
- Some are related to shape errors when the allowed error to approximate circle
by segment is large and arc radius small.
- fix the actual error used in ConvertToPolyline().
- Use SHAPE_ARC::DefaultAccuracyForPCB() instead of a fixed value as extra margin
in zones. It should not change something, because it is also a fixed value
(5 micrometers), but it is not a magic number.
-TransformArcToPolygon() fix some issues and add a new algo, based on the arc actual
outline shape (initial algo is still available in code, just in case).
2021-06-30 13:33:49 +02:00
0d8f0d361e
Allow aligning pads in FP editor when locked
...
Locking is not a concept in the footprint editor. The signature for
checking is slightly different in the alignment tool, so we need to move
the check higher to allow aligning items in fpeditor
2021-06-29 16:48:31 -07:00
c6e4dcbecf
Pcbnew: fix incorrect geographical annotation dialog message.
2021-06-29 17:11:37 -04:00
e4c108ee3a
Pcbnew: minor geographical annotation dialog user message improvements.
...
Remove schematic from the completion message as it can no longer be
updated though the dialog.
Add a warning to synchronize the schematic with the annotation changes.
2021-06-29 15:17:00 -04:00
04b71f5167
Meander minimum spacing can be equal to track width + minimum clearance
...
2x track width was too constraining in some scenarios
Also better wording "Min Spacing" to indicate to the user that
the actual spacing could be larger if there are any constraints.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8172
2021-06-29 19:30:01 +01:00
e402563087
Don't recalculate meander spacing. Use constrained value instead.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1776
2021-06-29 19:30:01 +01:00
0c2ac9a711
Move GUI font code to common.
...
This also allows the Mac fixes for font facenames to be more
compartmentalized.
Fixes https://gitlab.com/kicad/code/kicad/issues/8657
2021-06-29 18:27:58 +01:00
64f07ea9c6
Update text variables after changes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8697
2021-06-29 13:55:06 +01:00
1db33c7b3a
More safety (and better impl) for not sharing FP table/info stuff.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8657
2021-06-29 12:46:16 +01:00
a1dfc36233
More error message regularization.
2021-06-29 01:08:26 +01:00
c159500101
Remove nags and make Sel Layer and add via commands uniform.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8686
2021-06-28 19:17:01 +01:00
fa49b54f93
Fix minor issue in TransformCircleToPolygon() when aError is set to a large value.
...
pcb_painter.cpp: add (but not activate) compil option to show the conversion
of SHAPE_ARC::ConvertToPolyline as segments, for debug purposes.
2021-06-28 15:50:16 +02:00
9a865b1989
Fix a typo and a minor compil warning
2021-06-28 14:37:35 +02:00
d296bec5b8
Differentiate aSingleLine mode for SCINTILLA_TRICKS
...
This allows us to avoid the monospaced font (along with the tab-stop
handling), and process a <return> as an OK rather than just <shift> +
<return>.
Fixes https://gitlab.com/kicad/code/kicad/issues/8425
2021-06-28 11:20:12 +01:00
062c4fda62
More error message regularization (and translatability improvements).
2021-06-28 00:45:24 +01:00
08fb05e522
Make sure HPGL and DXF drill map generators honour origin setting.
...
ADDED: also adds origin setting to Footprint Position File dialog
and generators.
Fixes https://gitlab.com/kicad/code/kicad/issues/8669
2021-06-27 17:40:20 +01:00
4aa8318dc2
More error message regularization.
2021-06-27 14:24:02 +01:00
70ac70f360
Don't attempt to round-trip netnames through wxListBox.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8684
2021-06-27 12:02:21 +01:00
1fcd7992a0
Performance improvement for adding/removing dielectric layers.
...
(Roughly a 10X speedup on Mac.)
2021-06-27 09:43:20 +01:00
b924c85f80
Start recording the precision of dxf imports
2021-06-27 00:38:19 -04:00
0f27618125
Use a list dialog that can be parented by the Board Setup dialog.
...
(The current one keeps pulling the Kicad Manager window to the front
on OSX.)
I also removed the UpdateUI stuff which was probably causing:
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
2021-06-27 01:41:35 +01:00
0dfb5fcaf9
Error message cleanup.
...
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
2021-06-26 22:53:24 +01:00
4c5df22eb0
Don't show busy cursor when dialogs (including progress) are in use.
...
Also removes a stale comment.
Also moves the progress reporters earlier to lessen need for busy cursor.
Also cleans up some error strings and makes other more easily translatable.
2021-06-26 22:53:24 +01:00
310adedf85
Add GetCircleToSegmentError() to geometry/geometry_utils.
...
This function returns the error created by a circle to segment approximation.
2021-06-26 18:57:07 +02:00
5c21f93803
Consistency in progress and error messages.
2021-06-26 13:23:43 +01:00
e50eaed7b9
altium: Improve parsing of UTF-8 data
...
This is an implementation based on d4ccec05 from @fxtentacle
2021-06-26 13:58:56 +02:00
e6c047896c
altium: introduce progress reporting, fix possible nullptr when reading 3D models
2021-06-26 12:54:31 +02:00
95ec9c786c
Board setup spacing.
2021-06-26 10:55:31 +01:00
81fc710a5d
Use consistent terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8681
2021-06-26 10:11:41 +01:00
83b549741d
PCB_ARCS in zones: increase clearance to avoid DRC issues. This is a workaround,
...
but arcs in tracks are still not fully fixed.
The clearance is increased by only 4 microns, that should not create issues.
2021-06-25 19:45:32 +02:00
9f51f7b055
Formatting and include cleanup.
2021-06-25 17:48:15 +01:00
31d7a0a8d1
TransformArcToPolygon(): slightly better approximation of arc.
...
The error between the "right" shape and the polygon is slightly smaller.
The approximations of the inner arc and the outer arc are better, but not perfect.
Also add (for test and debug purpose only) the code to show the polygon when
drawing a PCB_ARC (currently disabled)
2021-06-25 18:46:16 +02:00
1f4a56005e
Remove extraneous isPrinting test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8609
2021-06-25 12:44:51 +01:00
4eafd2664a
FootprintWizardBase.py: fix use of cmp(), non existing in python3
...
Fixes #8677
https://gitlab.com/kicad/code/kicad/issues/8677
2021-06-25 09:04:49 +02:00
27804e40e2
Go back to using space-width for tabs (instead of max-char-width).
...
The max-char-width impl was buggy and never applied to PCBNew anyway.
Plus the stroke font has a max-char-width of 2.8 time the space width,
so it made for really wide tab spacing.
Also fixes a bug where the Scintilla editors weren't getting a
monospace font on Mac. (This bug may also exist on the other
platforms, but each would need its own fix.)
Also moves more of the Scintalla customizations to SCINTILLA_TRICKS
where they can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/8666
2021-06-24 23:53:27 +01:00
232ffe97be
Diff pair gap only overrides netclass clearance when it's smaller.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8676
2021-06-24 16:56:53 +01:00
744dadd412
Naming conventions and formatting.
2021-06-24 16:56:53 +01:00
a89f6404b4
Fix logic bug found by Coverity.
2021-06-24 12:18:22 +01:00
8502fd6877
Divide-by-zero safety.
2021-06-24 12:18:22 +01:00
a8028e3bd1
Fix uninitialized variables.
2021-06-24 12:18:22 +01:00
95ab53d119
pcbnew: fix missing layer names and missing layers in stackup table
2021-06-24 08:52:51 +00:00
b532ecec52
Fix ALTIUM_RULE_TOKEN qa test failure
2021-06-24 05:58:24 +00:00
a7eb611744
Fix leftover vias in shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8597
2021-06-23 22:13:35 -04:00
27e9750507
Pcbnew: fix footprint selection bug.
...
Do not remove footprint objects from list of selected objects when there
are no drawable objects other than the reference and value text.
Increase the minimum size rectangle for footprints from 0.025mm to 1mm
when the footprint has no drawing objects so that it is easier to select
the footprint in this case.
Add some pretty colors to the footprint bounding box and hull outline
so that it's possible to tell the difference between selection areas.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8379
2021-06-23 19:46:33 -04:00
50eea4f487
Import progress dialog for FabMaster.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5315
2021-06-24 00:21:37 +01:00
5fa5a73c6d
File open/import progress dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6864
Fixes https://gitlab.com/kicad/code/kicad/issues/2166
2021-06-23 23:55:54 +01:00
ae612a454e
Make blind via rendering more intuitive by putting top on top...
...
bottom on bottom, and the via colour larger.
2021-06-22 18:24:46 +01:00
7efca0113d
Reset m_inDrawingTool on exit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8653
2021-06-22 13:02:45 +01:00
a31b667e2a
Plotter: better shape for CHAMFERED_RECT and ROUNDRECT pads with margin.
...
The shape of the pad+clearance area is not similar to the shape drawn on screen
2021-06-21 18:55:33 +02:00
9fb77473cd
pcb_painter.cpp: fix incorrect shape of CHAMFERED_RECT pads with negative clearance.
...
Negative clearance (for instance on mask or paste layer) was not taken in account
2021-06-21 18:52:57 +02:00
00b4134eb8
pcb_painter.cpp: fix incorrect shape of ROUNDRECT pads with negative clearance.
...
If a negative clearance (for instance on mask or paste layer) is set to more
than the corner radius, the drawn shape was broken (fully incorrect size)
2021-06-21 13:44:30 +02:00
685ee31c35
Workaround a few more OSX printf problems.
...
Also regularizes the frame title processing.
Also fixes a type where the library name wasn't processed for
variable expansion.
Fixes https://gitlab.com/kicad/code/kicad/issues/7742
2021-06-20 22:48:19 +01:00
de4eb1fcef
Convert to zone: take dest layer from editor active layer
...
Show non-copper zone properties if active layer is non-copper
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8646
2021-06-20 15:13:18 -04:00
b72545a432
Implement more aggressive re-entrancy blocking for drawing tools.
...
A similar strategy was already implemented in Eeschema.
Also adds some safety around clearing of autopan and mouse capture.
Fixes https://gitlab.com/kicad/code/kicad/issues/6909
2021-06-20 11:09:55 +01:00
89718dd3ba
Naming conventions.
2021-06-19 19:36:53 +01:00
c6606a0582
Hook up delete to undo last segment when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8362
2021-06-19 11:37:20 +01:00
d26449cc29
Formatting.
2021-06-19 11:37:20 +01:00
f8e9542004
Fix crash when opening board setup after zone filler exits
2021-06-18 12:23:12 -04:00
3072422538
Allow caller to specify which library table to add library to.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8013
2021-06-18 11:39:18 +01:00
e540752640
Allow all selected footprints/symbols to be changed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7389
2021-06-17 23:34:56 +01:00
16047b7419
3D preferences bug fixes.
...
1) Make sure prefs get saved when closing parent frame.
2) Add camera projection mode to settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/8110
Fixes https://gitlab.com/kicad/code/kicad/issues/8626
2021-06-17 12:22:18 +01:00
1722bc03b0
Consistent terminology and punctuation.
2021-06-17 00:05:17 +01:00
cbd9208d73
Fix missing translation
2021-06-16 12:48:47 -07:00
7953a5c62b
Work around MacOS printf/format issues
...
MacOS wxWidgets implementation of wxPrintf/Format suffers from some
issues when mixing string types. We avoid this by manually formatting
the string ourselves.
Fixes https://gitlab.com/kicad/code/kicad/issues/8404
2021-06-16 11:54:55 -07:00
c8444913df
Implement lock between zone filler and drc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8621
2021-06-16 16:12:01 +01:00
db19ae226a
PANEL_PCBNEW_ACTION_PLUGINS: fix not working "open plugins folder" on Linux
2021-06-16 08:15:20 +02:00
8f9800f760
Fix pad shape for certain legacy circular pads
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8615
2021-06-15 22:25:55 -04:00
1a35d8ba5d
Setup layer mapping when importing Eagle library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7891
2021-06-15 19:20:17 +01:00
5b8f32acd2
Python script sample: fix compatibility with recent changes in code.
2021-06-15 18:19:58 +02:00
142dd48c99
SCRIPTING_TOOL::showPluginFolder(): fix wxWidgets3.14 compatibility (Linux mainly)
2021-06-15 18:19:58 +02:00
3616a8f0ee
Use polygon coordinates relative to the board.
...
Footprint polygon coordinates are relative to the footprint.
Translate to the board coordinates when doing hittest with
a (selection) rect.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8596
2021-06-15 15:04:11 +00:00
38f18d0505
Fixed according to KiCad Style Guide.
2021-06-15 14:59:04 +00:00
aed0352828
pcbnew: Replace CR inserted on macOS instead of LF when CTRL+Enter is pressed.
2021-06-15 14:59:04 +00:00
4418707e5e
Add a few more overbar syntax conversion calls.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8606
2021-06-15 13:09:18 +01:00
fbbe723811
Fix board_item.i after recent changes in Pcbnew code.
...
(some class names changed)
2021-06-15 10:59:52 +02:00
5d9ff0b9b7
Step export dialog: save 2 options in config file.
...
2 options (overwrite file and replace 3d shapes) were not saved previously.
2021-06-15 09:33:37 +02:00
fb46cd8bc5
Expunge the use of the word component from Eeschema code.
...
The only exception to this is the SPICE simulator's use of component
when referring to physical component (R, L, C, etc.) values.
2021-06-14 14:00:21 -04:00
30f3d11355
fix possible incompatibilities of python scripts due to recent code cleaning
2021-06-14 18:57:05 +02:00
2c1da70181
Write all variables to temp config file and have Kicad2Step use that.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7670
2021-06-14 16:54:45 +01:00
0527dc6fe0
Fp editor: fix initialization of default courtyard line thickness.
...
When no config file found it was initialized to DEFAULT_SILK_LINE_WIDTH,
although it was initialized to DEFAULT_COURTYARD_WIDTH in board editor.
Fixes #8344
https://gitlab.com/kicad/code/kicad/issues/8344
2021-06-14 08:31:55 +02:00
82f3df4086
Attempt to fix Python qa code after renames
2021-06-13 11:20:19 -04:00
5bb6b1a3cc
Minor cleanup.
2021-06-12 11:39:28 +01:00
3644224cb6
Build smoothed area at outline
...
The clearance to board edge will be set by the knockout routine.
Clipping twice can leave small imperfections in the edge that need to
get triangulated
2021-06-11 14:26:38 -07:00
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
ade38f48bc
Add conversion from old `~...~` to new `~{...}` notation
2021-06-11 18:40:57 +00:00
16b0147af8
Prefix DIMENSION types.
2021-06-11 17:59:44 +01:00
44086ff2b2
Pull 3D preferences into KiCad preferences architecture.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5187
2021-06-11 11:19:40 +01:00
5492fafdf4
Pcbnew: allows access Layers context menu when right clicking from below layers list
...
Fixes #6614
https://gitlab.com/kicad/code/kicad/issues/6614
2021-06-11 09:32:47 +02:00
d8b1e827c7
Check all previous merge events
...
Typo only continued merge loop when last element was successfully
merged, leaving tracks where multiple segments were colinear
Fixes https://gitlab.com/kicad/code/kicad/issues/5020
2021-06-10 16:59:35 -07:00
fbc135e69f
Rename SCH_COMPONENT to SCH_SYMBOL.
2021-06-10 10:34:49 -04:00
1c3df973d6
Coverity warnings fixes.
2021-06-10 13:45:02 +02:00
5f1e9bc8a7
Fix typos in source code
2021-06-10 01:24:15 +00:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
410dbe17de
Fix inital predefined track width selection in track properties dialog
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8578
2021-06-09 09:59:25 +00:00
d946d6e68f
Cleanup some pgm_base.h includes
2021-06-08 21:56:00 -04:00
ffa87e69c6
Remove/replace some stdint.h includes
2021-06-08 21:17:57 -04:00
Jeff Young
jean-pierre charras
Seth Hillbrand
Wayne Stambaugh
Roberto Fernandez Bautista
Marek Roszko
Thomas Pointhuber
Fabien Corona
Jon Evans
Eeli Kaikkonen
Michal Schulz
Mikolaj Wielgus
luz paz
david-beinder